DALS Lighting LHS07-CC-BK Hardscape Step Light Installation Guide
- June 13, 2024
- dals Lighting
Table of Contents
DALS Lighting LHS07-CC-BK Hardscape Step Light Installation Guide
| MODEL | LUMENS | WATTS | KELVIN | INPUT |
|---|---|---|---|---|
| LHS07-CC-BK | 200 Im | 3W | 2200, 2700, 3000, 3500, | 4000K |
Landscape transformer, model LTRP-60-BKor LTR-300-BK is required for installation. Sold separately.
ITEMS INCLUDED IN THE BOX
-
Linear hardscape light
-
Waterproof wire nuts (x2)
-
Screws and anchors (x2)
-
Mounting screws (x2)
COMPATIBLE ACCESSORIES (SOLD SEPARATELY)
LTRP-60-BK: Transformer /- Max. 60W
LTR-300-BK: Transformer /- Max. 300W
LCBL-50-16: 50 ft, 16 gauge low-voltage wire
LCBL-50-14: 50 ft, 14 gauge low-voltage wire
LCBL-100-16: 100 ft, 16 gauge low-voltage wire
LCBL-100-14: 100 ft, 14 gauge low-voltage wire
LCBL-100-12: 100 ft, 12 gauge low-voltage wire
LCBL-200-12: 200 ft, 12 gauge low-voltage wire
WARRANTY
DALS offers a 5 year warranty from the date of purchase which covers repairs
or replacements of defective parts of the housing, optics, and electronics.
To contact DALS customer service call 1 877 430 1818 or send an e-mail to
[email protected].
Installation Guide
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE
CIRCUIT BREAKER.
Instructions pertaining to a risk of fire, electric shock or injury to
persons. Installation must be done according to local electrical codes.
Installation should be done by a certified electrician.
Installation in hardscape
-
Ensure that the power from the transformer is turned off (sold separately).
-
Prepare your electrical run accordingly, make your connections.
-
Use the mounting plate as a template to mark the holes for the plastic anchors. Drill 4 holes of 1/4″ by 1-1/8″ deep.
-
Install the linear light in place with the included hardware.
-
Turn the power on and select the color temperature by clicking on the button.
Wall mounted Installation
-
Ensure that the power from the transformer is turned off (sold separately).
-
Unscrew the fixture from the mounting plate.
-
Pass the wire through the wall and connect wires from fixture to the transformer (sold separately) with the waterproof wire nuts.
-
Go to step 5 for an installation on soft materials (wood, plastic, etc.) Use the fixture body as a template to mark the holes for the plastic anchors. Drill 2 holes of 1/4″ by 1-1/8″ deep.
-
Use the long screws to fix the linear light on the wall.
-
Turn the power on and select the color temperature by clicking on the button.
1 877 430 1818
www.dals.com
INS LHS07-CC REV2