PowerWalker 700-1400VA Portable Power Station Instruction Manual

PowerWalker 700-1400VA Portable Power Station

PRODUCT INFORMATION

The PowerWalker PPS THR Series is a portable power station that can provide power to various devices in case of power outages or when you’re on-the-go. It has a folding handle for easy transport, an LCD display for monitoring the power status, and various input/output ports for charging devices.

Product Features

• 700-1400VA power capacity
• Portable design with folding handle
• LCD display for monitoring power status
• Ambient light sensing for automatic backlight adjustment
• Superfast charging mode, ECO mode and UPS mode
• USB-C, USB-A, AC, DC, car supplementary output ports
• Solar and car input options for charging
• AC overcurrent protection

Product Usage Instructions

1. Unfold the folding handle and turn on the power switch/setting by short pressing it (0.1-1s).
2. The LCD display will show the power and status of the product. The backlight will be turned on or off automatically based on the ambient light intensity.
3. To switch between superfast charging mode, ECO mode, and UPS mode, short press the power switch/setting button. To select UPS mode, press the button for 1-4 seconds and then short press to select ON or OFF. To exit the setting interface, do not press anything for 10 seconds or press the button again for 4-10 seconds.
4. The ambient light changes colors based on the status of the product. White light indicates discharging mode, blue light indicates charging mode, orange light indicates failure mode, and no light means standby mode or off. To turn off the ambient light, press the power switch twice within 1.5s. To wake it up again, short press once.
5. The DC switch can enable or disable USB-C, USB-A, and car supplementary output. The DC indicator light will be on when the DC output is enabled.
6. The AC switch can enable or disable the AC output. The AC indicator light will be on when the AC output is enabled.
7. To charge the PowerWalker PPS THR Series, you can connect it to a car cigarette lighter port through the car charger wire or connect it to a solar panel through the solar charging wire (if purchased).
8. You can charge devices with type-C or type-A interfaces through their respective ports on the PowerWalker PPS THR Series.
9. The AC output can support 2-pin or 3-pin AC plug power devices such as PCs, TVs, mini-fridges, and vacuum cleaners. However, it has reduced power usage for appliances exceeding 1400W (not all appliances are supported).

PRODUCT OVERVIEW

1. Folding handle
2. LCD
3. Ambient light sensing
4. Power switch/setting
5. Ambient light
6. DC switch
7. AC switch
8. Solar/car input
9. USB-C
10. Light and switch
11. USB-A
12. AC input
13. Breaker
14. AC output
15. Car supplementary output
16. Air inlet/outlet

FUNCTION

handle

| Easy to fold

2

| ****

LCD

| 1. Display the power and status of the product;

2. LCD backlight will be turned on or off according to the product usage status.

3| Ambient light

sensing

| The brightness of LCD backlight is automatically adjusted

according to the intensity of ambient light.

4

| ****

Power switch/setting

| Short press for 0.1~1s

1.Turn on the MPS(mobile power station); 2.Wake up LCD and ambient light;

3.When the product beeps for alarm, mute;

Press the key twice within 1.5s

turn off ambient light.

Press the button for 4 ~10s, enter function setting mode 1.Short press the button to switch between superfast charging mode, ECO mode and UPS mode;

2. Select UPS mode, press the button for 1~4s, short press to select ON or OFF, press the button again for 1~4 seconds to complete the setting;

3. No press for 10 seconds or press the button again for 4~ 10s

will exit the setting interface;

---|---|---

5

| ****

Ambient light

| 3 colors: white,blue,orange

1. The brightness of the white light changes gradually, indicating the discharging mode;

2. The brightness of the blue light changes gradually, indicating the charging mode;

3. The blue light is always on, indicating that the battery is fully charged;

4. The brightness of the orange light changes gradually, indicating the failure mode;

5. The ambient light is always off, indicating that the MPS is in standby mode or off;

6. Press the power switch twice within 1.5s, you can turn off

the ambient light,     and short press once to wake up it.

6

| ****

DC switch

| 1. Short press the switch button to enable or disable USB-C (9), USB-A (11) and car supplementary output (15);

2.   When DC output is enabled, the DC indicator light will be on.

7

| ****

AC switch

| 1. Short press the switch button to enable or disable the AC output;

2.   When AC output is enabled, the AC indicator light will be

on.

---|---|---

8

| ****

Solar/car input

| 1. Connect the cigarette lighter port of the car to the MPS through the car charger wire, charge MPS;

2.   If you purchased the solar panel, connect it to the input

through solar charging wire, charge the MPS.

9| USB-C| You can charge type-C interface devices such as PC and mobile

phone.

10

| Light and switch| 1. Short press the switch to turn on or off;

2.   Press the switch 4s to enter the SOS mode, short press it again to exit the SOS mode.

---|---|---
11| USB-A| You can charge type-A interface devices such as PC and mobile

phone.

12

| ****

AC input

| 1. AC power wire connect to AC source (wall plug e.g.).;

2.   The MPS has UPS function, which means that you can use it as UPS when the grid suddenly failure, MPS can automatically and quickly switch to the battery mode to power your device uninterruptedly.

13| Breaker| AC overcurrent protection (key recovery).

14

| ****

AC output

| 1. Support 2-pin or 3-pin AC plug power devices, such as PC, TV, mini- fridge, vacuum cleaner, etc.;

2.   Support Reduced power usage of appliances exceeding 1400W (does not support all excess appliances, need to test to confirm it can be used, so as not to affect your work life).

15

| Car supplementary output| 1. Support output of 13.6V/10A, which can power car appliances;

2.   Recharge the 12V lead-acid battery of the car (note the

polarity of the battery).

16| Air inlet/outlet| Air inlet and outlet to dissipate heat inside the product.

Turn-on Instruction

1. Please short press “LCD button (4)”.
2. Short press “DC output switch (6)” within 10s to turn on the DC output.
3. Short press “AC output switch (7)” to turn on the AC output.
4. The corresponding indicator lights up.
5. Interval over 10s, MPS will automatically turn off.

Turn-off Instruction

1. Short press “DC output switch (6)” to turn off the DC output.
2. Short press “AC output switch (7)” to turn off the AC output.
3. The corresponding indicator lights off.
4. The MPS will automatically turn off within 10 ~ 45s.

LCD display

Note:

• Enable ECO (energy-saving mode), the MPS operates in the battery discharge mode.
• If the AC load is less than 60W and the duration exceeds 1hours, the AC output will automatically turn off.
• If the DC load is less than 10W and lasts for more than 5 hours, the DC output will automatically turn off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>