FiiO M15S Portable High Definition Lossless Music Player User Guide

FiiO M15S Portable High Definition Lossless Music Player

Buttons and Ports Labeled

1 Volume knob| 6  Indicator light| 11 3.5mm headphone out/ line out/coaxial output
---|---|---
2 Power/Lock button| 7 HOLD switch| 12 2.5mm balanced headphone out
3 Previous track| 8 Volume up| 13 4.4mm balanced headphone out /line out
4 Play/Pause| 9 Volume down| 14 Type-C data/Charging port
5  Next track| 10  Multifunction button| 15 MicroSD card slot

Note: Pictures are for reference only. The actual product may vary.

Power on/off

Hold the Power/Lock button to turn on the M15S. On its first startup, tap the preferred language onscreen to enter the main U1. Hold the Power/Lock button while the M15S is on and a shutdown dialogue will pop up. You can select to turn off or reboot the player.

Charging

The M15S supports fast charging. To achieve the designed charging time, it is recommended to use a USB power source of QC 3.0 or one that supports PD protocol.

Gestures

1.  Return to previous menu: swipe right from the left edge of the screen, or swipe left from the right edge.
2. Return to home menu: swipe up from the bottom edge of the screen
3. Multitask managing: swipe up from the bottom edge of the screen and then hold

Working modes switch

The M155 has five working modes: Android mode, Pure Music mode, USB DAC mode, Bluetooth Receiving mode and AirPlay mode. The M15S will default to enter Android mode when it powers on for the first time. You can switch to other working modes on the drop-down or Settings menu.

1. Android mode/Pure Music mode
   You would need to install the MTP driver before connecting the M15S to the computer for data transfer. Please download the MTP driver on our website and follow relevant instructions to install it.

2. USB DAC mode:
   When switching to the USB DAC mode for the first time, please download the USB DAC driver on our website and follow relevant instructions to install it.

3. Bluetooth Receiving mode:
   When switching to the Bluetooth Receiving mode for the first time, the M15S will automatically enter the pairing state. The next time it enters Bluetooth Receiving mode, it will reconnect to the last connected device automatically.

   • Force the device to enter pairing mode: Hold the Play/ Pause button for about 3 seconds.
   • Manually enter reconnecting mode: Short press the Play/ Pause button when not in pairing mode.
   • Clear current pairing: Hold the Previous and Next track buttons at the same time for about 3 seconds.
   • Play/Pause: Short press the Play/Pause button.
   • Previous/Next track: Short press the Previous/Next track button.

4. Air Play mode

When working in Air Play mode, the M15S requires a valid WiFi connection. Please confirm that it is connected to an available network before entering the AirPlay mode.
Note: The MTP driver for the MAC System and the USB DAC driver for the Windows system can be found in the Fiio Driver disk when connecting the M15S to a computer. Or, you can download the corresponding driver at http://www.fiio.com/Driver_Download.

HOLD switch
When the HOLD Switch is turned on, all buttons on the side of the M15S will be locked to prevent unintended touches as default (You can choose the button that will still be available on the settings menu beforehand). When the HOLD switch is turned off, all buttons will be available. Enhanced over-ear headphone mode When a fast-charging power adapter is inserted in the M155 and is detected, an “Enhanced over-ear headphone mode” will show up on the GAIN settings menu. Meanwhile, a dialogue prompt of “Switch to Enhanced over-ear headphone mode?” will pop up, and you can decide whether to switch it based on your needs.

Firmware upgrade

1. Over-the-air (OTA) automatic upgrade
   Turn on the WiFi function on the M15S and connect it to an available network. It will automatically detect if there is a new firmware. If no firmware is detected, please tap “Technical Support-> Firmware Update->Online Upgrade” to check and upgrade the firmware manually.

2. Upgrade through a microSD card

Please download the firmware on our website and follow relevant instructions to upgrade it.
Download link: http://www.fiio.com/supports

Notes and Precautions

• Please do not repair or disassemble the product on your own and do not put it in water.
• Please charge the battery on a regular basis to secure the battery life if this product has not been used for a long time.
• Please do not use the battery after it was soaked in water; do not use the battery if it is severely swollen; do not disassemble, bump and squeeze the battery, or drop it into fire.
• It is recommended to use a suitable charger in case of a high-voltage adaptor causing damage to the device.
• In the likely event that the M15S hangs up, you may hold the Power/Lock button for over 10 seconds to force a reboot.

Accessories

(please check if the following items are included)

• M15S
• Leather case
• USB cable
• Quick start guide
• Warranty card
• Ejector pin

To Learn More

• For related video instructions of the M15S and FAQ (Frequently Asked Questions), please scan the QR code below.
• M15S FAQ
• fiio.com
• To learn more about the product, please visit our website: www.fiio.com.
• To check the CMIIT-ID of the M15S, please go to the menu of Settings->System->Legal information.

Due to continuous improvement, every specification and design is subject to change at any time without further notice.

WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be handed as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
Internal/Supplied Batteries:
This symbol on the battery indicates that the battery is to be collected separately. This battery is designed for separate collection at an appropriate collection point. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm
Technologies International Ltd., registered in the United States and other countries. Hereby, Guangzhou FiiO Electronics Technology Co., Ltd declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.fiio.com/doc

WiFi

| 2412-2472MHz| 12.47dBm
5180-5320MHz| 12.47dBm
5500-5825M Hz| 12.47dBm

For this radio device, the following restrictions on putting into service or of requirements for authorization of use apply in BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK, IS, LI, NO, CH,TR:5150-5350 MHz band is restricted to indoor operations only.

FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Master Quality Authenticated
The M15S includes MQA technology, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The M15S Now Playing screen shows green or blue dot next to MQA logo to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It shows blue dot to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>