DAVIS 403 Vantage Vue Weather Station Instruction Manual
- May 15, 2024
- DAVIS
Table of Contents
VANTAGE VUE ®
QUICK SETUP GUIDE
403 Vantage Vue Weather Station
Prepare the Sensor Suite: attach wind cups and wind vane; pull tab on battery
(or install battery if not included); install debris screen and rain collector
tipping spoon assembly. Download the Weather Link app.
If using Weather Link Live, power it up and use the Weather Link app to set it
up.
If using Weather Link Console, power it up and follow the on-screen prompts to
set it up.
Verify data transmission from
the Sensor Suite to the Weather Link app or to the Console.
Note : For best reception during this step, Weather Link Live and/or
Console and the Sensor Suite should be at least 10 feet (3 meters) apart.
(Initial reception typically takes 10 minutes depending on specific 1-3
minutes but can take up to environmental conditions.)
Mount
the Sensor Suite to its outside mounting pole.
Please refer to your manuals for detailed instructions.
Manuals can be downloaded at www.davisinstruments.com/vv-
manual.
For Sales & Service Contact
o3s3(0)61 603742
[email protected]
www.hhsolutionsje
Copyright ©2023 Davis Instruments Corp. All rights reserved.07395.405 Rev. A 2/9/2023