ANTOP AT-723 J Pole Outdoor TV Antenna Mount Instruction Manual
- June 10, 2024
- ANTOP
Table of Contents
ANTOP AT-723 J Pole Outdoor TV Antenna Mount
Installation Instruction Manual
Your J POLE-OUTDOOR TV ANTENNA MOUNT can be used with any outdoor TV antenna.
The J Pole’s adjustable angle provides optimal mounting options to ensure your
antenna receives the best possible signal opportunity.
What’s in the Box
-
Pole X lPC
-
Flange-Lock Nut x 3PCS
-
Carriage Bolt 0.7in x 2PCS
-
Carriage Bolt l.7in x lPC
-
Hex Lag Screw 2.0in x 2PCS
-
Plastic Wall Anchor x 2PCS
-
Base Pivot x 1 PC
-
Manual
Technical Specification
- Arm length: 19in
- Fixing plate: Tl.5
- Diameter: l.3in
- Weight: 1.61b
The following are instructions for installation. Read through all instructions prior to beginning installation procedure.
Installation
-
First position the J Pole vertically. Then move the J Pole downward until aligned with the base pivot. Then insert the carriage bolt (1.7in) through the holes of base pivot and the round holes of the J Pole. Seat the square neck of carriage bolt into the square hole of the base pivot to prevent it from spinning. Thread a flange-lock nut onto the end of the bolt. Spin and tighten the nut.
-
Insert the two carriage bolts (0.7in) through the square holes of the J Pole from the inside out into the arc holes of the base pivot. Seat the square neck of carriage bolt into the square hole inside the J Pole. Thread the flange-lock nuts onto the ends of each bolt and spin. Adjust the angle until the best position for mounting the antenna is reached. Then, fasten the nuts.
-
Determine ideal location where antenna will be placed. Mount the J Pole to the surface using the hex lag screws (2.0in). For hardwood or concrete wall mounting, predrill the holes into the wall. Then tap in the plastic wall anchors into the holes. Then fasten the hex lag screws into the anchors.
NOTE:
● Before attaching the antenna to any surface, please test reception in that area first.
● To tighten the hex lag screws, you will need a ratchet or a nut driver. A power drill with the right driver bit can also be used to finish tightening the lag screw. -
Used With ANTOP Antennas
WARRANTY POLICY
Customers should first contact their place of purchase to determine the reseller’s warranty policy. Antop Antenna’s warranty will take effect after the expiration of reseller’s policy. Antop Antenna, warrants its products for a period of one (1) year from the original date of purchase. Warranty is valid only with proof of purchase. Warranty does not apply to defects or failures of the product caused by: neglect, misuse, negligence, accident, abuse, mishandling, misapplication, alteration, modification, power outage, unauthorized/unreasonable use, or any uncontrollable environmental damage.
RETURNS & REFUNDS
For any return, customers should first contact their place of purchase to
determine the reseller’s return policy. If purchased directly from Antop
Antenna or before returning directly to Antop Antenna, a Return Material
Authorization (RMA) number must be obtained in advance by contacting Antop
Antenna customer service via e-mail or telephone. Merchandise returned to
Antop Antenna must have an RMA number displayed on the box and a copy of your
proof of purchase inside the package.
Absolutely no refund after 30 days of purchase from Antop Antenna. A
restocking fee of 15% may be deducted from any refund, ask representative for
further details. Refund policy for US & canada customers only.
EXCHANGE & REPLACEMENT
For any exchange or replacement, customers should first contact their place of
purchase to determine the reseller’s policies. No upgrades or exchanges for
different models or SKU’s. One (1) Year limited manufacturer’s warranty for
exchange of product due to malfunction, failure or defect, missing parts or
components. Exchanges will be for the same item, model and/or SKU, within one
(1) year of original purchase date. A Return Material Authorization (RMA)
number must be issued by Antop Antenna prior to returning any product or part.
To obtain an RMA, contact Antop Antenna via email or telephone.
SHIPPING & COSTS
Customer will be responsible for shipping costs of merchandise sent to Antop
Antenna. Please consult a customer service representative for details. When
shipping any item to Antop Antenna, please consider using a trackable shipping
method. Antop Antenna cannot be held responsible for lost or misdirected
shipments. Exchanged and returned products must be sent to: Antop Antenna, RMA
Department, 1650 S. Balboa Ave, Ontario, California 91761. To receive a Return
Material Authorization from Antop Antenna please send your request to RMA
Dept: Support@antopusa.com
or to speak to Customer Service: via telephone, M-F, 9am to 5pm (PST)
909-947-8883.
www.antopusa.com
ANTOP ANTENNA INC I Tel. 909.947.8883 I Email:
Support@antopusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>