StarTech com U02442-USB-EXTENDER 79ft USB 2.0 480 Mbps Active Cable with 4-Port USB Hub User Guide

StarTech com U02442-USB-EXTENDER 79ft USB 2.0 480 Mbps Active Cable with

4-Port USB Hub

Product Information

The U02442-USB-EXTENDER is a USB 2.0 active cable with a 4-port USB hub. The cable extends up to 79ft (24m) and supports data transfer rates of up to 480 Mbps. It also features a power LED indicator, a USB-A host cable, and a DC power port. The product comes with a two-year warranty.

Package Contents

• U02442-USB-EXTENDER cable with 4-port USB hub
• Power adapter

Requirements

The U02442-USB-EXTENDER requires a USB-A port on the host computer and a power outlet for the power adapter.

Warnings

• Read the entire Quick-Start Guide and ensure the instructions are fully understood before using this product.
• Never operate this product if parts are missing or damaged.

Regulatory Compliance

The U02442-USB-EXTENDER is compliant with FCC Part 15 and Industry Canada standards.

Warranty Information

The U02442-USB-EXTENDER is backed by a two-year warranty. For further information on product warranty terms and conditions,please refer to www.startech.com/warranty.

Product Usage Instructions

Installation

1. Connect the USB-A Host Cable to a USB-A Port on the Host Computer.
2. Connect the Power Adapter to a Power Outlet and into the DC Power Port of the USB Active cable with USB Hub.
3. Connect a USB Peripheral Device to any of the four USB-A Peripheral Ports. Some USB peripheral devices may need drivers to finish their installation.

No drivers are needed for the USB active cable with USB hub.

Product Diagram

(U02442-USB-EXTENDER)

Front View

Rear View

•  USB 2.0 (480 Mbps)

•  Supports up to 5 V and 0.5 A (2.5 W)

2| Power LED| •  Indicates if the USB Active Cable with USB Hub is receiving power from the Host Computer or the Power Adapter

• Solid Green = Power

• Off = No Power

3| USB-A Host Cable| • Connect to a USB-A Port on a Host Computer

• USB 2.0 (480 Mbps)

4| DC Power Port| • Connect the USB Active cable with USB Hub to a Power Source using the included Power Adapter

• Recommended 5 V and 2 A

Product Package Contents

• USB Active Cable with USB Hub x 1
• Power Adapter x 1
• Quick-Start Guide x 1

Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/U02442-USB-

EXTENDER

• Computer with a USB-A Port z
• USB peripheral device with required USB-A cables

Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood before using this product.
Never operate this product if parts are missing or damaged.

Installation

1. Connect the USB-A Host Cable to a USB-A Port on the Host Computer.
   No drivers are needed for the USB active cable with USB hub.

2. Connect the Power Adapter to a Power Outlet and into the DC Power Port of the USB Active cable with USB Hub.

3. Connect a USB Peripheral Device to any of the four USB-A Peripheral Ports.
   Some USB peripheral devices may need drivers to finish their installation.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty

Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Regulatory Compliance
FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada

StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.

StarTech.com
Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

References

• USB Extender Hub 24m, 4-Port USB 2.0 Hub - USB 2.0 Cables | Cables | StarTech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>