Danfoss MFB45-U-10 Fixed Inline Piston Motor User Manual
- June 10, 2024
- Danfoss
Table of Contents
Danfoss MFB45-U-10 Fixed Inline Piston Motor
Product Information
The M-MFB45-U-10 is a fixed inline piston motor from Danfoss, used in
industrial applications. The motor has a flow rating of 45 USgpm at 1800 RPM
with optional shafts and porting. It has either direction shaft rotation and
comes with special features to provide satisfactory service life for
components. The motor is designed for use with full flow filtration to provide
fluid meeting ISO cleanliness code 20/18/15 or cleaner.
The motor comes with a foot mounting bracket, screws, valveplate, mounting
kit, gasket, retaining ring, rotation plate, pin, lift limiter, spring,
washer, cylinder block, spherical washer, shoe plate, nameplate, housing,
shaft, key, spacer, sleeve, piston kit, shaft seal, O-ring, plug, swash plate,
bearing, and retaining rings. It is recommended to service all units with the
F3 Seal Kit 923000. The model code of the motor is M-MFB45-U-10-***.
Product Usage Instructions
To use the M-MFB45-U*-10 piston motor:
- Make sure to use the motor in industrial applications only.
- Use full flow filtration to provide fluid that meets ISO cleanliness code 20/18/15 or cleaner for satisfactory service life of components.
- Refer to the assembly view and model code for accurate identification and use of optional shafts and porting.
- Make sure the shaft rotation is either direction.
- Follow the recommended torque of 90-95 lb. ft. when tightening screws.
- Service all units with the F3 Seal Kit 923000.
For further support and training, refer to the local addresses provided in the user manual.
Foot Mounting Bracket
OVERVIEW
Included in Rotating Group Kit 923001
Assembly View
Model Code
- Mobile Application
- Model Series
- MFB – Motor, fixed displacement, inline piston type, B series
- Flow Rating
- @1800 RPM
- 45 – 45 USgpm
- Shaft Rotation (Viewed from shaft end)
- U – Either direction
- Optional Shafts and Porting
- E – Splined Shaft SAE 4-bolt flange
- F – Straight keyed shaft SAE 4-bolt flange
- Design
- Special Features
For satisfactory service life of these components in industrial applications, use full flow filtration to provide fluid that meets ISO cleanliness code 20/18/15 or cleaner. Selections from Danfoss OF P, OFR, and OFRS series are recommended
- Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electric components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market as well as the marine sector. Building on our extensive application expertise, we work closely with you to ensure exceptional performance for a broad range of applications. We help you and other customers around the world speed up system development, reduce costs and bring vehicles and vessels to market faster.
- Danfoss Power Solutions – your strongest partner in mobile hydraulics and mobile electrification.
- Go to www.danfoss.com for further product information.
- We offer you expert worldwide support for ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide you with comprehensive global service for all of our components.
Products to offer
- Cartridge valves
- DCV directional control valves
- Electric converters
- Electric machines
- Electric motors
- Gear motors
- Gear pumps
- Hydraulic integrated circuits (HICs)
- Hydrostatic motors
- Hydrostatic pumps
- Orbital motors
- PLUS+1® controllers
- PLUS+1® displays
- PLUS+1® joysticks and pedals
- PLUS+1® operator interfaces
- PLUS+1® sensors
- PLUS+1® software
- PLUS+1® software services, support and training
- Position controls and sensors
- PVG proportional valves
- Steering components and systems
- Telematics
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com
Danfoss Power Solutions (US) Company 2800 East 13th Street Ames, IA 50010, USA
Phone : +1 515 239 6000
Danfoss Power Solutions GmbH & Co. OHG Krokamp 35 D-24539 Neumünster, Germany
Phone : +49 4321 871 0
Danfoss Power Solutions ApS Nordborgvej 81 DK-6430 Nordborg, Denmark
Phone : +45 7488 2222
Danfoss Power Solutions Trading (Shanghai) Co., Ltd. Building #22, No. 1000
Jin Hai Rd Jin Qiao, Pudong New District Shanghai, China 201206
Phone: +86 21 2080 6201
Danfoss can accept no responsibility for possible errors in catalogues,
brochures and other printed material. Danfoss reserves the right to alter its
products without notice. This also applies to products agreed. All trademarks
in this material are property of the respective companies. Danfoss and the
Danfoss logotype are trademarks of Danfoss A/S. All rights reserved
© Danfoss
March 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>