UeeVii UAP180 Wireless Access Point User Manual

UeeVii UAP180 Wireless Access Point

Thank you for ordering and using UeeVii UAP180 Wireless Access Point, please read the manual carefully before use. If there are any problems during the use, please contact us in time. The installation of this device requires some network knowledge. If you can’t install it, please let us know or contact a professional.
Customer Service Email: [email protected]
(Any questions please contact the UeeVii team, not the COMFAST team.)

Product Description

UeeVii UAP180 is an outdoor high-power Gigabit Access Point, 2.4G&5.8G dual- band equipped with PA power amplifier, equipped with 128MB large memory, 2″5dbi gain antenna can achieve 360-degree omnidirectional coverage; support AP, routing, bridging, relay 4 modes provide you with different network solutions; it can be used for small-scale outdoor wireless deployments such as garages, yards, shops, farms, barns, etc., with simple setup and cost saving.

Product Functions

• 2.4GHz&5.8GHz dual frequency
• 1200Mbps fast wireless rate
• 110/10OM/ 1000M/ WAN Port,1 10/100M/ 1000M/ LAN Port
• 200mW/23dBm transmit power, large area WIFl coverage
• 48V POE network cable power supply, flexible layout
• 25dBi dual-band omnidirectional antenna to improve signal transmission and reception performance
• Automatically adapt to the channel to ensure a stable and smooth network
• Adjustable power to reduce mutual interference between APs
• Dual-band equipped with PA power amplifier chip to increase power
• Support PSK, WEB, and other security authentication methods
• Support 120 users with high capacity
• Ip66 level waterproof professional outdoor enclosure design

Package Included

• 1x UAP180 AP
• 1x PoE Adapter
• 1x Network cable
• 2x Screws
• 2x Stainless Ties
• 1x User Manual

Interfaces & LED Indicators

Reset Button: long-press for 5s to reset the AP.
LED Indicators: Included power, LAN, WAN, WiFi indicators

Quick Start (Router Mode)

1. Connection Detail
   Need to pay attention to the difference between LAN and WAN port, there are the following 4 connection methods.

   • Internet connects to the LAN port of the PoE adapter, clients with smartphones
   • Internet connects to the WAN port of the AP host, clients with smartphones
   • Internet connects to the LAN port of the PoE adapter, clients with computers and smartphones
   • Internet connects to the WAN port of the AP host, clients with computers and smartphones

Tips:

• Modem/ routers/ switches for internet connection are omitted from the reference diagram, practical applications need to connections
• According to your needs, please be sure to refer to the connection method above to connect, otherwise it may display “No internet Connection /Connected, no internet”

Connect to WiFi

In router mode, according to your needs, refer to the figure above to connect all parts of the device. You can find the AP Wifi name “COMFAST_XXXX_2G/5G” in the smartphone WiFi list, you can connect without a password. If you need to change the WiFi name and password, please continue reading the advanced settings section below.

Advanced Settings

Smartphone Access Device

• Refer to the above connection method to make the AP device work in router mode;
• Use your smartphone to connect to the AP’s WiFi hotspot” COMFAST XXXN_26/5G”;
• Open the mobile browser and enter 192.168.10.1 to the login page; Before logging in, set the page language to English through the language icon in the bottom right corner;
• Enter the default login password “admin” to access the device;

Computer Access Device

• Refer to the above connection method to make the AP device work in routing mode,
• Enter 192.168.10.1 in the computer browser to the login page,
• Before logging in, set the page language to English through the language icon in the upper right corner,
• Enter the default password “admin” to access the device.

Setting WiFi Name and Password

• Setting path: Network>Wireless>2.4G Wireless or 5.8G Wireless>Enter New SSID>Enter New Password>Apply
• It is recommended that the SSIDs of 2.4G WiFi and 5.8G WiFi be set to different names to distinguish them, and the passwords are set to the same for easy memory.
• The advantage of 2.4G WiFi is that it has strong penetration, but it is easy to interfere with; The 5.8G WIFi has good anti-interference, long transmission distance, and good stability. It is recommended to connect 5.8G WiFi hotspots in daily use.

IP Address Settings

The default IP address is 192.168.10.1, you can set a new IP address according to your needs. Setting this option is not recommended if you are not a professional
Setting path: Network>LAN>Enter new IP address, etc>Apply

Workin$g Modes

The UAP180 equipment supports 4 working modes: Router mode, AP mode, Repeater mode and Bridge mode, and the default is routing mode.

Router Mode

• Select Router mode, choose PPPoE;
• Enter your Internet account name and password;
• Set up a separate password for new WiFi, and click “Finish”.

AP Mode

• Select AP mode and set the intranet IP address. For example, your superior router IP is 192.168.1.1. In AP mode, the IP of the device should be set as follows: 192.168.1.2 (Cannot conflict with other devices)
• Set an independent password for your extended WiFi (It is recommended that the password is the same as the WiFi password of the superior router).
• Click “Finish”, and wait for the setting to succeed. After the configuration succeeds, connect the LAN port of the POE adapter and the LAN port of the superior router with network cable.
  Note: After the configuration succeed, please accessed and managed the device through the IP address 192.168.1.2

Repeater Mode

• Select “Repeater mode” and use default IP 192.168.10.1
• Select 2.4G or 5.8G band, scan and select your wireless SSID and enter its password.
• Set an independent password for your extended WiFi (it is recommended that the password is the same as the WiFi password of the superior router), and Click “Finish”.

Bridge Mode

• Select Bridge mode and set the intranet IP address. For example, your superior router IP is 192.168. 1.1. In Bridge mode, the IP of the device should be set as follows: 192.168.1.2 (Cannot conflict with other devices)
• Select 2.4G or 5.8G band, scan and select your wireless SSID and enter its password.
• Set an independent password for your extended WiFi (It is recommended that the password is the same as the WiFi password of the superior router), and Click “Finish”.
• Note: After the configuration succeed, please accessed and managed the device through the IP address 192.168.1.2

How to Reset the UAP180 Device

Turn on the device’s power supply, wait for about 90s, then press and hold the “RESET” button for 12-15s (the black button at the bottom of the device), the signal light will flash,and then release the button to wait for the system to restart (about 2 minutes). The signal light will be on again. Wait the “COMFAST_XXXX_2G or COMFAST_XXXX_5G” WiFi appears in the WiFi list of the computer/mobile phone, now you can start to setup.

Specifications

（1S1u0p/1p0o0rtMP/O1E00P0oMw/eLrASNupRpJ4ly5）Port

Power Supply| PoOwEeArdaadpatpertesru:p4p8oVr0ts.3820A2P.3OaEf sptoanwdearradd(aupptetor (1c0o0nfimgeutreerds));;
PConseurmption| >13W
Waterproof| IP66 Level
---|---
Users| 25.8G WiFi：: 480
Safety| Support WPA（TKIP）、WPA-PSK、WPA2
SSID Hide| Support
Size| 3538543.5mm

Installation

Mounted on Bracket

Mounted on Wall

Measure the appropriate screw installation position, then install the 2 screws in the package on the wall, and finally hang the UAP180 on the screws to complete the installation.

Technical Support and Service

• Thank you for your order and for using UeeVii UAP180 Outdoor AP, please read the manual carefully before use. If there are any problems during the use, please contact us in time;
• The installation of this device requires some network knowledge. If you can’t install it, please let us know or contact a professional. Tech Service Email: [email protected]

(Any questions please contact the UeeVii team, not the COMFAST team.)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>