ORBIS Viaris Solar Single Phase Instructions

VIARIS SOLAR SINGLE-PHASE

The CONTAX D-10011 BUS VIARIS SOLAR is a complement to VIARIS UNI / VIARIS COMBI + electric vehicle chargers, to which it allows its integration into single phase photovoltaic generation installations.
Two-way single-phase direct measuring energy counter, up to 100 Amperes, for DIN rail mounting, with RS485 port and Modbus protocol, specially designed to communicate with VIARIS UNI / VIARIS COMBI + single phases.

The CONTAX D-10011 BUS VIARIS SOLAR has the functions of:

• Measurement of direct / reverse energy and total active energy.
• Single-phase active power and total active power.
• RS485 communications, Modbus protocol.
• LCD display of direct active energy, reverse active energy, active energy, voltage, current, active power, apparent power, power factor, and software version.

TECHNICAL SPECIFICATIONS

Reference Voltage:                       230 Vac ± 10 %
Reference frequency:                   50 Hz
Reference current:                       0.25-5 (100) A
Impulse constant:                        1000 imp/kWh
Flashing LED pulses:                  90 ms
LCD display:                               LCD 5 + 1
Operating temperature:               -20~+ 55 °C
Transport and storage:                -20~+ 70 °C
Average annual humidity:            75 %
Maximum humidity:                    95 %
Precision class:                            Class 1.0
Start current:                               0.004 Ib
Energy consumption:                  ≤ 0.4 W, ≤ 8 VA
Communications:                        RS485, Modbus-RTU protocol
Meets the standard:                     EN50470-1/3

DIMENSIONS

CONNECTION

SETTINGS

Solar configuration is done by accessing the IP address via WiFi: 192.168.4.1 corresponding to the web embedded VIARIS electric vehicle chargers in firmware versions 2.0.54 or higher (see User Manual of your VIARIS electric vehicle chargers).
Access the Installation menu and activate the SOLAR option. Complete the data corresponding to the maximum solar power that can be generated, select whether there is a network injection, the connection scheme, and the connection as a single phase.

SCHEMATICS SOLAR INSTALLATION

Depending on the scheme of the solar installation, there are 3 configuration options to connect the VIARIS charger TMC100 meter (see diagrams on the back of this instruction).

• Option 1. The TMC100 is connected to the Investor output. It measures what the photovoltaic installation generates.
• Option 2. The TMC100 is connected after the Connection Splitter. The total consumption of the house is measured together with the consumption of the charger.
• Option 3. The TMC100 is connected after the Connection Splitter, but only the consumption of the home is measured.

The CONTAX D-10011 BUS VIARIS SOLAR must be installed before the Connection Splitter.

The option chosen must be indicated in the embedded web schema for its proper functioning.

00/10_2021 A01600107060416

ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61 E–28020 MADRID
Tel.:+ 34 91 5672277
E-mail: info@orbis.es
http://www.orbis.es

ORBIS

VIARIS SOLAR

OPTION
1

1. UTILITY METER

2. SOLAR PANELS

3. CONTAX D-10011 BUS
   VIARIS SOLAR

4. INVERTER

5. SOLAR

6. ELECTRICAL CONNECTION DISTRIBUTOR

7. HOME

OPTION
2

1. UTILITY METER

2. SOLAR PANELS

3. CONTAX D-10011 BUS
   VIARIS SOLAR

4. INVERTER

5. ELECTRICAL CONNECTION DISTRIBUTOR

6. HOME + VEHICLE

7. HOME

OPTION
3

1. UTILITY METER

2. SOLAR PANELS

3. CONTAX D-10011 BUS
   VIARIS SOLAR

4. INVERTER

5. ELECTRICAL CONNECTION DISTRIBUTOR

6. HOME

References

• Orbis Italia S.p.a. - L'energia intelligente - Orbis Italia
• Orbis - Energía Inteligente

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>