ORBIS Viaris Solar Three Phase Instructions

VIARIS SOLAR THREE-PHASE

The CONTAX D-8043 BUS VIARIS SOLAR is a complement to VIARIS UNI / VIARIS COMBI + electric vehicle chargers, to which it allows its integration into three-phase photovoltaic generation installations.
Three-phase direct-measured two-phase energy meter, up to 80 Amperes, for DIN rail mounting, with RS485 port and Mod-bus protocol, specially designed to communicate with VIARIS UNI / VIARIS COMBI + three-phase.

The CONTAX D-8043 BUS VIARIS SOLAR has the functions of:

• Measurement of direct/reverse energy and total active energy.
• Three-phase active power and total active power.
• IR communications, protocol EN62056 (IEC1107)
• RS485 communications, Modbus protocol.
• LCD display of total active energy, direct and reverse active energy, phase voltage, phase current, total/phase active power, total/phase apparent power, total/phase power factor, frequency, etc.
• To view the different data on the LCD screen, press the buttons .

TECHNICAL SPECIFICATIONS

Reference Voltage:                   3×230/400 Vac ± 10 %
Reference frequency:               50 Hz
Reference current:                   0.25-5 (80) A
Impulse constant:                    1000 imp / kWh
LCD display:                           LCD 6 + 2
Operating temperature:           -20 ~ +55 °C
Transport and storage:            -20 ~ +70 °C
Average annual humidity:        75 %
Maximum humidity:                95 %
Precision class:                        Class 1.0
Start current:                           0.004 Ib
Energy consumption:              ≤ 1.5 W, ≤ 10 VA
Communications:                    RS485, Modbus / IR protocol, protocol EN62056 (IEC1107)
Meets the standard:                 EN50470-1/3

DIMENSIONS

CONNECTION

SETTINGS

Solar configuration is done by accessing the IP address via WiFi: 192.168.4.1 corresponding to the web embedded VIARIS electric vehicle chargers in firmware versions 2.0.54 or higher (see User Manual of your VIARIS electric vehicle chargers).
Access the Installation menu and activate the SOLAR option. Complete the data corresponding to the maximum solar power that can be generated, select whether there is a network injection, the connection scheme, and the connection as a three-phase.

SCHEMATICS SOLAR INSTALLATION

Depending on the scheme of the solar installation, there are 3 configuration options for connecting the VIARIS charger TMC100 meters (see diagrams on the back of this instruction).

• Option 1. The TMC100 are connected to the Investor output. It measures what the photovoltaic installation generates.
• Option 2. The TMC100 are connected after the Connection Splitter. The total consumption of the house is measured together with the consumption of the charger.
• Option 3. The TMC100 are connected after the Connection Distributor, but only the consumption of the home is measured.

The CONTAX D-8043 BUS VIARIS SOLAR must be installed before the Connection Splitter.

The option chosen must be indicated in the embedded web schema for its proper functioning.

00/10_2021 A01600107060417

ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61 E–28020 MADRID
Tel.:+ 34 91 5672277
E-mail: info@orbis.es
http://www.orbis.es

ORBIS

VIARIS SOLAR

OPTION
1

1. UTILITY METER
2. SOLAR PANELS
3. INVERTER
4. SOLAR
5. ELECTRICAL CONNECTION DISTRIBUTOR
6. HOME

OPTION
2

1. UTILITY METER
2. SOLAR PANELS
3. INVERTER
4. ELECTRICAL CONNECTION DISTRIBUTOR
5. HOME + VEHICLE

OPTION
3

1. UTILITY METER
2. SOLAR PANELS
3. INVERTER
4. ELECTRICAL CONNECTION DISTRIBUTOR
5. HOME

References

• Orbis Italia S.p.a. - L'energia intelligente - Orbis Italia
• Orbis - Energía Inteligente
• Orbis Italia S.p.a. - L'energia intelligente - Orbis Italia

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>