ORBIS e-VIARIS UNI Three Phase EV Charger User Manual
- June 11, 2024
- orbis
Table of Contents
**ORBIS e-VIARIS UNI Three Phase EV Charger
**
WEB BROWSER ACCESS
The charger has an embedded web that allows:
- Switching on / off
- Reading of electrical parameters
- Download the file of recharges
- Programming of time schedules and maximum consumption
- Power modulator configuration
- Adjustment for installations with solar generation
- Communications WiFi, ethernet, 4G, access point, OCPP, etc.
- RFID / touch operation
Connect your mobile device or computer to the VIARIS charger for greater control using a web browser:
-
Set your device’s internet and network connection to Wi-Fi
-
If your charger is a VIARIS UNI you must connect to the ORBEVVC3nnnnnnnnnn network, and if your charger is a VIARIS COMBI + connect to the ORB-EVVC4nnnnnnnnnn network (where nnnnnnnnnn is the serial number of the charger)
-
Factory Password: 12345678 (It is recommended the password is changed to a secure password)
-
Open a web browser such as Internet Explorer or Google Chrome
-
Go to the Address bar and enter the IP address 192.168.4.1
e-VIARIS MOBILE APP
Download the user-friendly e-VIARIS Mobile App for greater control and management of your chargers.
Features:
- Remotely turn charger ON/OFF.
- Set up RFID or touch activation.
- Configure RFID cards.
- Manage one or more VIARIS charge points.
- Set charging times.
- Receive charging status notifications.
- Real-time data of your home and vehicle(s) energy consumption.
- View historic daily, monthly and annual charging data.
- Set load capacity.
- Firmware updates.
- Export charges to .csv file.
FREE download at Google Play and App Store:
Enable RFID activation
Enabling charger for use with RFID cards can be configured via the mobile app.
- Login into e-VIARIS mobile app.
- Click configuration icon upper right, to load settings menu.
- Choose Touch / RFID menu.
- Disable Touch activation to enable RFID activation.
- Configure the RFID activation behaviour.
Adding Cards
| Click Add card to enter programming mode | __ |
|---|---|
| Status bar of charge point will flash White light | __ |
| Hold card to activation zone on charger | |
| The mobile app will confirm the card details | __ |
| Enter Name and the expired date card if required | __ |
| Click Add another card if you want to add more or Finish to save | ** |
Card details will be visible in list|
Repeat the process to add additional cards or Click Save to finish|
__**
Removing Cards
| Click dustbin icon next to stored card | __ |
|---|---|
| Click Save | __ |
Subject to technical changes – additional information atwww.orbis.es
References
- Orbis Italia S.p.a. - L'energia intelligente - Orbis Italia
- Orbis - Energía Inteligente
- Orbis Italia S.p.a. - L'energia intelligente - Orbis Italia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>