ZYXEL EX5512-T0 AX6000 WiFi6 Multi Gigabit Ethernet Gateway User Guide
- June 10, 2024
- ZYXEL
Table of Contents
ZYXEL EX5512-T0 AX6000 WiFi6 Multi Gigabit Ethernet Gateway
A member of the Zyxel MPro Mesh solution family.
- MPro Mesh Solution:
- EX5512-TO
- WX5512-TO
- MPro Mesh App
- Visit www.zyxel.com/us/en for updated information.
Package Contents
US Importer
- Zyxel Communications, Inc
- 1130 North Miller Street Anaheim, CA 92806-2001 https://www.zyxel.com/us/en/
- Copyright @2022 Zyxel and/or its affiliates. All Rights Reserved.
Hardware Installation
- Use the included blue cable to connect the xDSL/cable/fiber modem’s LAN port to the EX5512-T0’s WAN port as illustrated.
- Connect the power adapter to the EX5512-TO and wait for 2 minutes. Check the EX5512-TO front panel.
- The Power /Internet /WAN /2.4G /5G LEDswill light up green as below when the setup is complete.
Note: If the lights do not turn on green, please retryO 20 or contact your service provider for assistance.
WiFi Connection A or B
- The label on the side of the EX5512-TO provides 2 ways to connect your wireless device to WiFi:
- Method A: Scan QR code or Method B: Using SSID
Method A: SCAN QR code to connect WiFi
- Check the QR code on the EX5512-TO’S Side label, and use your wireless device to scan this QR code.
- After scanning the QR code, join this SSIDand you can surf the internet.
Using the SSID method to connect WiFi
- The WiFi SSID is on the EX5512-TO’s side label
- On your wireless device, find this SSID and enter the WiFi Password on your wireless clients and you can surf the internet.
App Management
- After successfu lly surfing the internet, please download the MPro Mesh app to your wireless device to manage your MPro Mesh.
- Open this app and enter the EX5512-TO’s seriel number. The seriel number is on the bottom label as below.
- Use this appto enjoy the folowing features:
- Remote Management
- View Home Devices
- Guest Wi-Fi
- Manage Home Wi-Fi Name
- Internet Instant Block
- Add Mesh Extender
- Push Notification
Adding a Wireless Extender
WPS button: If you have a wireless extender you want to add to your
EX5512-T0’s WiFi network, press the EX5512-TO button once, and press the WPs
button on your extender within 120 seconds to start the WPS process.
Safety Warnings
- DO NOT use this product near water, for example, in a wet basement or near a swimming pool
- DONO expose your device to dampness, dust or corrOSive liquids.
- DO NOT store things on the device.
- DO NOT instal, use, or service this device during a thunderstorm. There is a remote risk of electric shock from li
- Connect ONLY Suitable accessories to the device.
- DO NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage igh toir points or Otner riskKS.
- ONLY qualihed service personnel shouid service or disassemble this device. Pledase contact your vendor for further information.
- Make sure to connect the cables to the correct ports.
- Place connecting cables carefully so that no one will step on them or stumble over them.
- Always disconnect all cables from this device before servicing or disassembling.
- Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example, 110V AC in North America or 23OV
- AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one.
- DO NOT remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor hirst before connecting it to a power outlet
- DO NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anone can walk on the power adaptor or cord.
- DO NOT use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lighthin9
- CAUTION: Risk of explosion if battery (on the motherboard) is replaced by an incorrect type. Dispose of used batteries according to the instructions. Dispose of them at the applicable collection point for the recycling of electrical and electronic equipment. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product
- DO NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.
- For example, do not place the device in an enclosed space such as a box or on a very soft surface such as a bed or sofa. he rollowing warning statements apply, wnere the disconnect device is not incorporated in the equipment or where the plug on the power supply cord is intended to serve as the disconnect device,
- Tor permanentiy connected devices, a reddily accessible disconnect device shall be incorporated external tO the equipment for pluggable devices, the socket-outlet shall be installed near the equipment and shall be easily accessible.
- Caution! The RJ-45 jacks are not used for telephone line connection.
FCC STATEMENT
The following information applies if you use the product within the USA
The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interterence, and
- This device must accept any interrerence received, including interrerence that may cause undesired ration.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the device. This device
has been tested and complies with the specifications for a Class B digital
device, pursuant to Part 15 or the Fc Rules. Ihese limits are designed to
provide redsonable protection against harmru interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception, which is
found by turning the device off and on, the user is encouraged to try to
correct the interference by one or more of the mea: following medsu Reorient
or relocate the receiving antenna Incredse the separation detween tne aevices
Connect the equipment to an outlet other than the receiver’s Consuit a dealer
or an experienced radio/iv technician for assistance This device meets all the
other requirements specified in Part 15E, Section 15.407 of the FCC Rules. The
following information applies if you use the product with RF function within
the USA.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation expOsure limits set forth for an
uncontrolled environment This transmitter must be at least 20 cm from the user
and must not be co-located or operating in conjunction with any other antenna
or transmitter. FCC regulations restrict the operation of this device to
indoor use only.
CANADA
The tollowing information applies if you use the product within Canada area
Innovation, Science and Economic Development Canada ICES statement
CAN ICES-003(6)/ NME-003(6)
Innovation, Science and Economic Development Canada RSS-GEN & RSS-247
statement
-
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
-
Operation is subject to the foll owing two conditions: (1) This
device may not cause interference; and (2) This device must accept any interterence, including interference that may cause undesired operation of the device -
This radio transmítter (2468C-EX5512T0) has been approved by Innovation, Science and Economic Deve lopment Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna
types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device
Antenna information
For indoor use only.
- If the product with 5G wireless function operating in 5150-5250 MHz and 5725-5850 MHz, the following attention must be paid,
- The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systens.
- For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.rp. limits as appropriate; and
- Where applicable, antenna type(s), antenna models(s), and the worst-case tilt angle(s) necessary to remain compliant with the e.i.rp. elevation mask requirement set forth in
- Section 6.22.3 of RSS 247 shall be clearly indicated.
- If the produce with 5G wireless function operating in 5250-5350 MHz and 5470-5725 MHz, the folowing attention must be paid.
- For devices with le ar na(s), the kimum antenna gain nitted for devices in the bands 5250-535 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.rp. limit
Informations antenne
Industry Canada radiation exposure statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and oper ith a
minimum distance of 29 cm between the radiator and your body.
See the User’s Guide at www.zyxel.com for more information, including customer support.