BlitzWolf BW-CML2 Gaming Monitor Light Bar User Manual
- June 10, 2024
- Blitzwolf
Table of Contents
BlitzWolf BW-CML2 Gaming Monitor Light Bar
Product Introduction
Thank you for choosing BlltzWolf computer monitor hanging lamp. This product is simplicity and generous, easy to connect, easy operation. Using touch sensing technology, you can get the feeling of joy at your finger trips. The product is suitable for business, office, learning, reading, ate.
Product Description
Product Installation
1. The hanging lamp is suitable for the display with a thickness of 15-25mm.
Wipe clean the surface of the computer monitor.
2. Tear off the adhesive
of the metal sheet, and stick it to the middle position on the top of the
display(The adhesive side is attached to the monitor).
3. Pass one end of the USB
cable through the bottom of the bracket4. Place the bottom of the bracket on
the display 3). Align the metal sheet.
4. Paste the adhesive of the fixed bracket 2
to the position between the bracket and the display screen, USB power on,
complete the installation.
Operation Instruction
-
Touch 1 time to open
Double click to close Short press to adjust the brightness of the light Long press to switch light color temperature -
Warm light/white light
-
RGB ambient light
-
Single click: turn on RGB light/switch light mode (15 RGB modes can be switched)
Long press: Long press for 3s to shut down
Product Specification
SCHEUFER Technologies GmbH
Address: Hertleinstrasse 37,
91052, Erlangen, Germany
E-mail: Mark.Zhang@scheufer.com
VISHTEC UK Co., Ltd
Address: Unit G25 Waterfront
Studios, 1DockRoad, London,
E16 1AH
E-mail: Vincent.feng@vish-tec.com