MIBOXER FUT038W LED Controller Instruction Manual

MIBOXER FUT038W LED Controller

Features

This product uses WiFi + Bluetooth + 2.4G wireless transmission technology, low power consumption, strong and interference ability.
WiFi + Bluetooth connect network can greatly enhance the connect network experience. When the router is disconnected, Bluetooth can also directly connect and control equipment at close range.
After successful network configuration using [MiBoxer Smart] app to achieve wireless dimming, remote control, group control, scene control, coming control, music movement, biorhythm, sleep plan, wake plan, one key execution, automation, etc. functions. And it supports 2.4G remote control.

RGBW LED Light

• 16 Millions of colors to choose
• Dim brightness / Saturation / White mode
• 2.4G RF wireless transmission technology
• WiFi wireless control support long-range control
• Auto-transmiting & Synchronization (only for remote control dimming)
• Device sharing
• Tap-to-Run & automation
• Timing seting / countdown turn on / off LED light
• Do not disturb

• Remote control Control distance 30m
• Smartphone app control
• Support third party voice control
• Group contro
• Biorhythm
• Support music rhythm
• Sleep / wakeup plan
• Support scene customization

Dynamic mode table selection (only for remote control)

• Select dynamic mode table 1: The light is powered off for 10 seconds and then powered on. Within 3 seconds, press the ” S+ ” button 5 ttmes, the blue light blink 3 tmes slowly, indicating successfully.
• Select dynamic mode table 2: The light is powered off for 10 seconds and then powered on. Within 3 seconds, press the ” S- ” button 5 tmes, and the yellow light blink 3 nmes slowly, indicating successfully.

Dynamic mode table 1 (default)

Adjustable

2| Automatic color change
3| Sam
4| Gemstone
5| Twilight
6| American
7| Fat Tuesday
8| Party
9| Slow Color Splash

Dynamic mode table 2 (need to switch manually)

Adjustable

2| White light Gradual change
3| RGB gradual change
4| Seven colors jump to change
5| Jump to change randomly
6| Red light gradual change

+Flash 3 tmes

7| Green light gradual change

+Flash 3 tmes

8| Blue light gradual change

+Flash 3 tmes

9| White light gradual change

+Flash 3 tmes

Auto transmitting & Synchronization (only for remote control)

1. Signal transmitting
   One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless.

2. Modes synchronization
   Different lights can work synchronously when they are started at different tmes, light by the same remote, under same dynamic mode and within 30m distance .

warning: The same dynamic mode, the same speed can be synchronized.

Linking Code / Unlinking Code Instructions

Linking Code Instructions

1. Switch off light, after 10 seconds then switch on again.
2. Short press ” I ” button 3 tmes within 3 seconds when light on.
3. Lights blink 3 tmes slowly means linking is done successfully

warning: Linking failed if light is not blinking slowly, Please follow above steps again. ( Note: Light that have linked can’t link again)

Unlinking Code Instructions

• Switch off light, affer 10 seconds then switch on again.
• Short press ” I ” button 5 tmes within 3 seconds when light on.
• Lights blink 10 tmes quickly means unblinking is done successfully.

warning: Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: Light haven’t linked that don’t need to unlink)

Compatible with these remote controls (Purchased separately)

PWM high-frequency / low-frequency switching

Switch to high frequency (6KHz): on the condition of turning on the light

1. Short press the “OFF” button of the remote control once;
2. Short press the “ON” button 5 tmes within 3 seconds, the white light blink 2 tmes quickly, indicatng successfully.

Switch to low frequency (400Hz): on the condition of turning off the light

1. Short press the “ON” button of the remote control once;
2. Short press the “OFF” button 5 times within 3 seconds, the white light blink 2 times slowly, indicating successfully.

Smartphone app control

1. Download and install the [MiBoxer Smart] or [Tuya Smart] app Search for [MiBoxer Smart] or [Tuya Smart] in Apple or Google store or scan the following QR code to download and install the app.
   Please click the ” Register ” button to create account while using it in the first time, Log in directly if you already had an account.

2. Network Configuration

   • Connect controller with power supply.

   • Confirm indicator light is flashing quickly (2 flashes per second),
     If indicator light isn’t in fast flashing state, there are two ways to enter:

   • Long press ” SET ” key until indicator light flashing quickly.

   • Power off and on controller 3 times.

3. Connect phone with home WiFi network in the 2.4GHz frequency.

4. Open homepage of app and click ” + ” button at the upper right corner of page.

5. Follow app prompts to complete configuration.

Scan QR code to watch video instruction

Attention

1. Please check whether the voltage of the power supply is in accordance with the light, and please check the connection of both the cathode and anode, otherwise the light will be broken.
2. Please don’t connect wires with power on. Please turn on again only when it is in right connection and no short circuit.
3. Non-professional user cannot dismantle the lighting fixtures directly.
4. Please do not use the light in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>