Ezy Anchor Screw In Peg Starter Pack Instructions
- June 9, 2024
- Ezy Anchor
Table of Contents
Ezy Anchor Screw In Peg Starter Pack
How To Use Ezy AnchorEzy
INSTALLATION
- Take your cordless drill or impact driver
- Connect the Torx driver bit to the drill/driver and secure in the chuck
- Pick up your Ezy Anchor with screw in position through the Ezy Anchor
- Connect your guy rope to the hook
- Hold the guy rope and hook together with your guiding hand
- Pick up the drill and driver in your driving hand
- Insert the Torx driver into the head of the screw
- Place drill in forward drilling position
- Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
- Installation complete
Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.
REMOVAL
- With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.
- Hold the hook and guy rope in one hand, place drill in reverse and screw out.
- Removal complete
- In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground.
- Remember to regularly charge your drill or impact driver battery.
More information: https://www.caravansplus.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>