SUNSUN CUP-129 UV Clarifier-Fountain Pump User Manual

SUNSUN CUP-129 UV Clarifier-Fountain Pump User Manual

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.

Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved.

The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.

Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided. If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing from you.

Send an e-mail to:
service@wiltec.info

or use our contact form:
https://www.wiltec.de/contacts/

The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch

Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany

To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.

Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler

E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15

Introduction

Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content.
Keep these operation instructions safe.

Safety instructions

CAUTION:

With standing water, garden, and swimming ponds and in their vicinity, the device may only be used with a residual current circuit breaker with a rated current of up to 30 mA (according to VDE 0100 parts 702 and 738 – Association for electronical, electrotechnical and informational technologies).

This device is not intended to be used by persons (including children) with limited physical, sensory, or mental capabilities or a lack of experience and/or knowledge, unless they are supervised by a person responsible for their safety or have received by such a person instructions on how to use the device properly. Children should be supervised to ensure that they do not play with the device.

ATTENTION:

• Perform a visual inspection of the device before each use. Do not use the device if safety devices are damaged or worn. Never override safety devices.

• Only use the device in accordance with the intended use specified in these operating instructions.

• You are responsible for the safety in the work area.

• If the cable or the plug is damaged due to external influences, the cable must not be repaired!
  It must be exchanged for a new one. This work may only be carried out by a qualified electrician.

• The voltage of 230 V AC indicated on the nameplate of the device must correspond to the existing mains voltage.

• Never lift, transport, or suspend the device by the power cord.

• Make sure that the electrical plug connections are protected from flood and moisture.

• Pull the power plug before working on the device.

• Avoid exposing the device to direct water jets.

• The operator is responsible for compliance with location-specific safety and installation regulations. If necessary, ask a qualified electrician.

• The user must take appropriate measures to prevent consequential damage from flooding of rooms in the event of malfunctions on the device (e.g., installation of an alarm system, standby pump, etc.).

• If the device fails, repairs may only be carried out by a qualified electrician.

• The device must never run dry or be operated with the suction line fully closed. The manufacturer’s guarantee is void for damage to the device caused by running dry.

• The device must not be used to operate swimming pools.

• The device must not be installed in the drinking water circuit.

• The device may only be installed outside of the water.

• Set up the device so that it is not exposed to direct sunlight.

• The device must be fastened horizontally to a suitable mounting point using screws.

• If necessary, the hose sleeves are to be shortened according to the hose diameter.

• Attach hoses and hose clamps.

• Although ultraviolet radiation is the least energetic of the ionizing radiation, it can be dangerous for humans and other organisms. UV radiation with a longer wavelength can also destroy chemical bonds in organic molecules. It is therefore advisable to use technical UV sources responsibly.

• Only operate the tube in a closed, unbroken housing.

WARNING:

Read all safety warnings and instructions. Failure to follow the safety instructions and instructions could result in electric shock, fire, and/or serious injury.
Keep all safety notices and instructions for future use.

Resistance

• The maximum temperature of the pumped liquid should not exceed +35 ℃ in continuous operation.
• No flammable, gas-forming or explosive liquids may be transported with this pump. This pump must not be used for other liquids, especially not for engine fuels, cleaning agents, and other chemical products!

Electrical connection

• The electrical connection hast to be made to a 230 V ~ 50 Hz protective contact socket. Fusing at least 10 A.
• The device is switched on and off with the built-in on / off switch (depending on the respective model).

Caution:

The devices of the CUP series are UV clarifiers with an integrated pump. They consist of a pump and a UV lamp. They must not be used if they are damaged or open, as the UV rays can damage the eyes and skin.

• This device should be placed under water. Make sure that the device is completely submerged in the water. The depth should not exceed 2 m.
• Do not switch on the device before it is in the water. Damage can occur if the device is operated without water.
• Please ensure that the device is on a solid surface and does not fall. Violent vibrations can damage the quartz glass sleeve which it contains.
• Only use the device if there is no evidence of damage to the cable or to the device itself.
• The device must not be operated when people are in the water.
• The maximum operating pressure of the device is 2 bar.

Areas of application/functionality

This UVC device ensures healthy fish and clear water. You can use it in ponds as well as in aquariums.
The water is pumped through the UVC device with a pump. There it flows past a UV lamp and is exposed to ultraviolet radiation which destroys the bacteria, pathogens and algae floating in the water. This will clarify the water.

Operation

Turn on the pump and wait for the device to fill with water. Check all connections for leaks. The device is put into operation by inserting the mains plug.

Technical data

Exploded views and parts lists

CUP-129/139

Maintenance/cleaning

Always pull the power plug before maintenance and cleaning work. The device should be cleaned once a year. The UVC lamp should be renewed annually as the output is only around 50 % after one year.

1. Pull out the power plug.
2. Switch off the pump and make sure that it cannot be switched on again accidentally.
3. Carefully loosen the screw connection at the end of the mains plug input of the UVC device (the large housing screw, not the one on the cable). Remove the large screw on the top of the lamp and pull out the device knob; then you can change the lamp.
4. Detach the main unit from the filter cage.
5. You can then start cleaning.
6. We recommend cleaning the quartz glass with a damp cloth. Please only use water for cleaning, never sharp objects (screwdrivers, knives, etc.).
7. Check the envelope for possible damage before reinstalling it.
8. Return all parts to their original position. Finally, the O-ring is placed in the correct position through the clamping plate screw.
9. When you reassemble the quartz glass, please make sure that there is no water in it. Please hold the glass with a dry cloth.
10. When inserting the new hose, please remove the clip; this can protect the clip from breaking. If the O-ring is broken, it must be replaced.
11. Please make sure that all sealing parts are cleaned and in their correct place, especially the Oring.
12. Finally, switch on the power supply to the pump again and then switch on the device.

Wintering

1. Clean the pump as described above.
2. Store the pump out of the water in a place protected from frost.
3. Check the pump for damage before starting it up again.

WARNING:

• The device must be disconnected from the power supply for all maintenance work.
• Do not use the device until it is COMPLETELY assembled.
• Do not perform any work on a running device.
• Never carry the device by the cable.
• Demount the device in case of frost.

Disposal regulations

EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were implemented in the law related to electrical and electronic equipment and appliances.

All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.

The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEEregistration number DE45283704.

Disposal of used electrical and electronic appliances (intended for use in the countries of the European Union and other European countries with a separate collection system for these appliances).
The logo on the article or on its packaging points out that this article must not be treated as normal household waste but must be disposed to a recycling collection point for electronic and electrical waste equipment.
By contributing to the correct disposal of this article you protect the environment and the health of your fellow men. Environment and health are threatened by inappropriate disposal.

Material recycling helps reduce the consumption of raw materials.

Additional information on recycling this article can be provided by your local community, municipal waste disposal facilities, or the store where you purchased the article.

Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler

Important notice:

The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.

© by WilTec Wildanger Technik GmbH

http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de

Item 50116, 50342

References

• Aoyue.de
• Teichtip.de
• WilTec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit
• Unternehmen: WilTec Wildanger Technik GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>