DTF STATION Seismo S20 User Manual
- June 9, 2024
- DTF STATION
Table of Contents
DTF STATION Seismo S20 User Manual
Trimetric View
Technical Parameters
| Model: | SEISMO S20 DTF POWDER STATION |
|---|---|
| Voltage | 110V-220V(50/60Hz) |
| Power | 15W |
| Motor Rotate Speed | 0-4500RPM |
| Powder Volume | 4KG |
| Bigest Film Size | 40*50CM |
| Machine Size: | 56.7 x 43.3 x 60.7cm(no including control box) |
| Packing Size: | 64.8 X 50.5 X 69.5cm |
| Packing Weight: | 27kg ( Gross weight ) / 46.2kg ( Volume weight ) |
| Certificate: | CE,FCC |
Control Box Instruction
Control Box Assembly
Drawer Handle Assembly
Operation Instruction
Powder Filling
Film Position and Adjusting
-
A3 Film Locating
-
40x50cm Film Locating
Connecting Power
Step Description
Step 1: Connect power. First, push power cord into power socket.
Step 2: Turn on power switch. Check that the power light is on.
Step 3 : Press the on button to start the motor. Note the speed value on
the display, and adjust accordingly.
Note: Speed of 1500RPM is generally sufficient for most cases.
Note: Higher values indicate higher motor speed.
Powder Dropping Control
Operation
After turning on the shaking, push the press plate down and the powder will
drop.
Note: Generally, pushing the press plate 3 times will drop enough powder
to cover most films, but you may press more if necessary.
Storage Notes
- Turn off the power switch and pull out the power cord after each use.
- Cover the lid of the powder box, and dress the machine coat.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>