Dongguan Xing Klai Intelligent Tecchnology Company Limited Q018 Full Coverage Adhesive Massager Instructions
Table of Contents
Dongguan Xing Klai Intelligent Tecchnology Company Limited Q018 Full
Coverage Adhesive Massager
Specifications
- Full coverage adhesive massager
- Supports remote control operation
- Rechargeable lithium battery
- 10 vibration modes
- USB charging with national standard 5V adapter
Charging
- Before using the product, charge it using the provided USB charging cable and a national standard 5V power adapter.
- Do not charge when the computer is in hibernation.
- Ensure the charging port is clean and dry before charging.
To check the charging status
- A. Light breathing flashing: charging
- B. Keep the light on: full charge
- C. After charging, gently remove the USB cable from the charging port.
Remote Control Mode
To operate the remote control
- Press and hold the remote control on/off button for 2 seconds to turn it on or off.
- Use the clitoris vibration button to control clitoral vibration with 9 frequency options.
- Press the small motor button to cycle through 10 vibration modes.
- Follow the FCC Rules for operation and interference guidelines.
FAQ
Q: How do I clean the product?
A: Clean the product with water or a neutral detergent such as bath lotion.
Full coverage adhesive massager
*Product before use
- Charging (please charge Product before use)
- Cleaning (clean with water or a neutral detergent such as bath lotion)
How to charge
- Please use the supporting USB charging cable with a power adapter or computer to link
*Please use the national standard 5V (1A or 2A or 4.5A) power adapter for charging
Cannot charge when the computer is in hibernation
Gently align the end of the charging USB cable with the charging port and
insert it
- Light breathing flashing: charging
- Keep the light on: full
- The invisible charging port is shown below
- After charging, please pull out the end of the charging USB cable gently.
Charging precautions
- Please make sure the charger is dry and clean before charging
- Do not expose to high temperature or humidity while charging
- If stored for a long time, please charge it once a month to maintain its charging performance
- There is a rechargeable lithium battery in Product, and the scrap should be treated as scrapped old electronic products and recycled to the corresponding recycling station
Remote control mode
Remote control button description
- product remote control on/off button
- Long press for 2 seconds to turn on or turn off the remote control. When it is turned on, the remote control is always on white
- Clitoris vibration button
- In the power-on state, click the clitoral vibration button, the white light flashes, and the clitoral vibration function
- Click to cycle through 9 vibration frequencies
- Long press the clitoral vibration button to turn off this function alone (does not affect other functions)
- When the host is in standby mode, briefly press the vibration button to start the frequency modulation of the small motor, cycle for 10 frequencies, and press and hold for 1.2 seconds to shut down.
- There are a total of 10 vibration modes.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in porlable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>