BS508JD True Wireless Earbuds User Manual

BS508JD True Wireless Earbuds

Product Information

The product is an electronic device that has a unique code or string of characters written in the form of text on the user manual/instructions. The code or string of characters is difficult  to read and does not provide any direct information about the product. Therefore, it is important to refer to the user manual/instructions for detailed product information.

Product Usage Instructions

To use the product, follow the steps given below:

1. Refer to the user manual/instructions for detailed information about the product.
2. Identify the parts and components of the product.
3. Familiarize yourself with the functions and features of the product.
4. Ensure that the product is properly charged, plugged in, or set up as per the instructions.
5. Turn on the product and start using it as per your requirement.
6. If you face any issues with the product, refer to the troubleshooting guide provided in the user manual/instructions.
7. Follow the safety instructions provided in the user manual/instructions to avoid any accidents or damage to the product.

By following the above instructions, you can use the product safely and effectively.

Please read this user manual and Bluetooth functions carefully before using, and pay attention to those important safety and maintenance information. Keep earbuds away from children to avoid any wrong Usage.

• Pairing name:E10 TWS: True Wireless Stereo
• Mutual Pairing:. Pairing between earbuds
• Interconnection: Connect between earbuds
• Connect: Pairing of earbuds with Bluetooth devices
• Pairing: Connection of earbud to Bluetooth device

Specifications

• Bluetooth Profiles Supported:HSP,HFPA2DP.AVRCP
• Audio Decoding Protocol: sBC,AAC
• Transmission Power: Class 2
• Operation Range: >10m
• Frequency Range: 2.4GHz-2.48GHz
• Battery of Earbuds: 35mAh Li-polymer Battery
• Charging Voltage of Earbuds: DC4.75V-5.25V
  • Charging Time of Earbuds: About 1.5 hours
• Battery of Charging Case: 300mAh Li-polymer Battery
• Charging Voltage of Case DC 4.75V-5.25V
  • Charging Time of Case: 1.5 hours
  • Charging Earbuds Times from Charging Case:3 times
  • Music Playing Time(Normal mode):6 hours(509%6 Volume)
  • Talk Time: 2.5 hours(509% Volume)
  • Standby Time: 40 hours
• Driver: 12mm
• Driver Sensitivity: 108dbt3@iK Hz
• Driver Impedance
• Driver Frequency response 160+159% 20Hz-20KHz
• Dimensions of Charging Case(mm):45(L)x22.4(W)x49.6(H)
• Dimensions of Earbuds(mm): 33.9()x18.9(W)x18.3(4)
• Weight(per earbud) About 3.2 g8
• Total Weight: Total 32.2g
• Charging Ambient temperature:0°C-45°C
• Non-Charging Ambient: -10C-60°C
• Storage Ambient: -20°C-40″C

The time mentioned above may vary due to user’s operation mode and device settings.

Product appearance

1. Charging Case Type-C charging port
2. Charging Case Indicator light
3. Reset button
4. Top cover
5. Earbud Indicator light
6. Earbud-Touch area
7. Earbud-Voice outlet
8. Earbud-Main mic
9. Earbud-Charging area
10. Earbud-Secondary mic

Earbud function status and voice prompt

Charging Case Indicator

Wear earbud (R) and earbud (L) according to label L&R.

• Step1
  

• Step2 Slightly rotate earbud until firm

• Step3 Make earbud to cochlear edge

How to Charge the Earbuds

Put the earphone into box to charging Note: Put the headset into the charging box, and the and the charging case indicator will not appear until the charging box is closed.

How to Charge the Charging case

• Use the TYPE-C cable to connect with computer

• Use the TYPE-C cable to connect with mobile phone charger

• Note 1: Before charging, please check whether the specifications of the charging device meet the charging voltage requirements of this charging box. (check the “charging voltage of charging case and earbud” parameter in ” Specification”)
• Note 2: Use only the supplied charger to charge your earbuds. Other device may violate the validation or the maintenance article of this product and may cause danger.
• Note 3: Do not try to force open the built-in battery as this will damage your earbuds.
• Note 4: Earbuds will lose its power automatically if left un-used. In this case,fully charge your earbuds less than every 3-6 months.
• Note 5: Do not place the earbuds in a high temperature environment for a long time. Note 6:Do not dispose of your earbuds into fire or water.

Turning On/Off

Method 1
Turning On: Open the cover of charging case to turn on automatically.
Turning Off: Put them back and close the cover to power off.
(Note: Do not switch the cover frequently)

Method 2
Turning On: Long touch the earbuds for 2 seconds to power on
Turning Off:After the earbud is disconnected from the Bluetooth device for 5 minutes, the earbud will turn off automatically.

Pairing

Pairing between Earbuds

1. Long touch the touch area of the earbud for 2s and the earbud will automatically power on. After a few seconds, the earbud is paired successfully.

2. Open the charging case cover and long press the charging case button 6 seconds to clear the pairing record of the headset, put the headset in the charging box and wait for a few seconds After the headset is automatically paired with TWS, after the two headsets are successfully paired, will be prompted “TWS connected”, the R enters the device pairing state (The indicator light of the R flashes white slowly, the L flashes white every 5 seconds

Pairing with Bluetooth devices

1. After the earbud is paired successfully, they enter the pairing mode with the Bluetooth device
2. When the earbud is disconnected from the Bluetooth device ,the voice prompt “Disconnected” will be heard.

Turn on the Bluetooth in your phone and choose “E10″ from Bluetooth Lis Bluetooth ON) st. BSE0-40 After connected with phone, the master earbud will indicate ” connected”. Remark: If the earbud is not connected to any Bluetooth device within 5 minutes, the earbud will automatically power off.

Re-connection(TWS)
Method 1: Long press the touch area of Right (R) earbud and Left (Earbud for 2 seconds to turn them on-wait for a few seconds, both earbuds will connect with each other automatically-wait for a few seconds then your earbuds will reconnect with the last paired device.
Method 2: Open the charging case-the earbuds will turn on wait for a few seconds, 2 earbuds connect automatically with each other wait for a few seconds ,then your earbuds will re-connect with the last paired device.

Reset
Put the earbuds into the charging case, open the cover of the charging case ,then press the reset button for 6 seconds until the charging case indicator flashes white light for 4 times (Note: After reset, the earbud can be reconnected to the Bluetooth device. Some Bluetooth devices may need to delete the pairing name on the phone to connect normally)

Answer/End a call
Answer a call: When phone call comes, double tap touch area of earbud R or L to answer the call. End a call: During phone call, double tap touch area of earbud R or L to end the call.

Reject a call
long touch area of earbud R or L for 2s to reject the call

Two Call Handling

When you are answering a calling, and there is another calling come:

1. Long touch the earbud (L/R) for2s to end the current call and answer another one.
2. Double touch earbud (L/R) to answer another call and hold on the current one.
3. After the above operation “2” settled, double touch the earbud (L/R) to transfer one call to another.
4. After the above operation “2” settled, long touch the earbud (L/R) for 2s to end the current calling and double touch the earbud (L/R) to end another one.
   Note: The mobile should support HFP 1.5, and the call waiting (Internet service) function of the mobile phone must be enabled

Music Pause/Playing
Double touch area of eabud L/R to play/pause music

Volume adjustment

1. Adjust the volume through the service
2. Click R increase the volume, click L to decrease the volume

Voice Assistant
triple tap the earbud(R) to activate voice assistance

Gaming mode
Triple touch earbud(L) to enter gaming mode ,R&L voice prompts “Game mode”.

Common Faults and Exclusion

Pre/Next Track

Next track: long touch the touch area of earbud R for 2-3s to next song.
Previous track: Long touch area of earbud L for 2-3s to previous song.

Maintenance

Do not use abrasive cleaning solvents to clean the earbuds. Do not allow the earbuds to touch with any sharp objects as this will scratching and damages. Please keep earbuds away from high temperature, humidity and dust.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>