deli E14952 Handheld Barcode Scanner User Manual

deli E14952 Handheld Barcode Scanner

How to use a barcode scanner correctly

1. To read a barcode successfully, please move it closer to the scan window if the barcode is small; otherwise move it slightly further away if the barcode is large.
2. In case of high specular reflection (e.g. laminated barcode stickers), please tilt the scanner in an appropri- ate angle to achieve a successful decode.
3. To scan a barcode, aim correctly and ensure the scan line crosses every bar and space of the symbol, other wise, there might be an error.

Overview of scanner parts

Removing the interface cable

Remove the interface cable as follow:

1. Find the cable removal hole on the bottom of the barcode scanner (as shown in the figure above).
2. Insert a paper clip-like fine needle into the hole, and press the paper clip hard. Meanwhile, carefully slide out the cable from the barcode scanner port.

Packing list

• Barcode Scanner x1
• USB Cable xl
• User Manual x1
• Paper Clip xl

Instruction:
To make sure that our vast users will use the product correctly in a convenient way, not all settings are listed in this manual. Some tedious operations are deleted in the principle of paring down to the essence and satisfying users’ applicability needs, thus greatly improving the user’s work eficiency. For any questions or if you need more details, please refer to «14952 Barcode Scanner End User Manual>, which can be downloaded from the Download Center under Customer Service section of our company website: www.deliworld.com.

Technical parameters

Set global configuration code

• Enable all barcodes
• (Al-supported barcodes are readable Restore factory defaults)

Decoding sound setting

• Enable beeper indicator of successful decoding
• Disable beeper indicator of successful decoding

Set scanning mode

• Manual mode
• Auto induction mode

Common suffiX setting

• To add a carriage return suffix
• To add a carriage return and a line feed
• To add a tab
• Disable suffix

Troubleshooting

Simple maintenance methods

1. Stains and dusts on the scanning window can sometimes afect the scanner’s performance. Please use good-quality tissue to gently wipe the scanning window and then blow any excess dust from the window using a dust blower. Use of poor-quality tissue for a long period of time will damage the surface smoothness and affect reading accuracy.
2. The shell of the scanner may be cleaned with a soft cloth. If needed, clean the exterior using a soft cloth with a mild detergent-water solution.

Maintenance

1. For product failures occur under normal operating circumstances, free of charge repair service shall be provided by our company within one year commencing from date of purchase.
2. The period of warranty shall start from the date of purchase and invoice date.
3. Customers are required to present the warranty card and the invoice upon request for repairing service.
4. Please keep this warranty card in proper condition for free warranty service. There is no replacement if lost. The purchase date filled must be consistent with what is indicated in the invoice, otherwise it will be invalid.
5. Any alteration to this warranty card renders it invalid.
6. Our Repair Service Center will be glad to provide services to customers for out-of-warranty products.

Under any of the following circumstances, no free of charge repair service shall be provided:

1. The warranty period has expired.
2. The user cannot present the invoice or dated proof of purchase.
3. The user requires a replacement of the product with the excuse that the product appearance looks old naturally due to use.
4. Machine failure is caused by use in violation of instructions.
5. Machine failure is caused by falling or collision.
6. Machine failure is caused by self-assembly, self-dis assembly and self-repair.
7. Commercial samples and goods sold at reduced prices, as well as products that have undergone performance Overload tests.

The table of toxic and hazardous substances/elements and their content

O: Indicates that this tOxic or hazardous substance Contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006 Requirements for Concentration Limits for Certain Hazard ous Substances in Electronic Information Products».
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in Si/T 11363-2006 «Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products». Due to limitations of science and technology development, these toxic or hazardous substances cannot be replaced or reduced for now. Under normal use Conditions, no ledkage or abrupt change will occur within 10 years, nor will it cause pollution to the environment or damage to people and property.

Environment-Friendiy Use Period:
This mark refers to the environment-friendly use period of electronic and electrical products sold in accordance with the Regulation of the People’s Republic of China on Limit on Use of Hazardous Substances in Electric and Electronic Products and General Guidelines of Environment-friendly Use Period of Electronic Information Products.

Special disclaimer
While the information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents. Such errors and omissions will be corrected in the new edition of user manual without further notice. The intellectual property of this manual belongs to our company and no organization or individual is allowed to change the Content.

WARRANTY CARD

REPAIR FORM

DELI GROUP CO., LTD.
301 Xuxiake Ave. Ninghai County
Ningbo 315600 China Made in China
info@nbdeli.com
www.deliworld.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>