deli 9939 Paper Shredder User Manual

: June 9, 2024
: DELI

Table of Contents

deli 9939 Paper Shredder
Product Information
Product Usage Instructions
Warnings And Precautions
Packing List
Product Specification
Maintenance
Product Diagram
Step-by-step Instructions
Troubleshooting
WARRANTY CARD
DELI GROUP CO., LTD.
Read User Manual Online (PDF format)
Download This Manual (PDF format)

deli 9939 Paper Shredder

Product Information

The product is a paper shredder designed for personal and office department use. It has a shredding capacity that enables efficient disposal of confidential documents. The product version is 1.2, dated October 2019 and has the model number 9929a/9939. The shredder can shred paper, CDs, and DVDs. The shredding speed is measured in meters per minute, and the shredder has a continuous run time. The product weighs approximately k kilograms and has a noise level of dB. The waste basket capacity is L , and the paper feed slot width is mm. The product comes with a user manual.

Product Usage Instructions

Place the shredder on a flat and level surface to avoid malfunction caused by tipping over.
Do not disassemble, modify, or repair the machine by yourself in any way to avoid electric shock or accidents.
Do not touch the blades with wet hands to avoid electric shock or accidents.
Unplug and turn off the shredder when discarding the shredded objects, moving, or not using the equipment for a while to avoid fire or electric shock.
Do not splash water onto the machine to avoid fire or electric shock.
Do not use this equipment next to heat sources, air conditioners, in high temperature and humidity or dust places to avoid fire or electric shock.
Do not shred tapes, copy papers, fabrics, or plastic films to avoid equipment failure.
Do not damage or process the power cord or place objects on the power cord to avoid fire or electric shock.
In case of smoke, odor or other abnormal conditions, please turn off the power switch immediately and stop using to avoid fire or electric shock.
Do not use the machine or power cord if they are damaged toavoid fire or electric shock.
Do not let children use this shredder to avoid accidents as the equipment has sharp blades.
Do not touch the blades in the feed and shredded outlet slots.
Do not allow ties, necklaces, sleeves, etc. to get caught in the feed slot. (If it is accidentally inserted, press and hold the Reverse button to remove the object.)
Do not allow hair to get caught in the feed slot. (If it is accidentally inserted, press and hold the Reverse button to remove the object.)
Do not put pins, paper clips, etc. into the feed slot. (If it is accidentally inserted, press and hold the Reverse button to remove the object.)
Do not spray flammable substances into the equipment to avoid fire.

Thank you for purchasing our product. This shredder is suitable for personal as well as office department use. We believe the shredding capabilities and confidentiality level of this series of shredders will enable you to dispose your documents in a more efficient manner. Please read this manual carefully before use, in order to facilitate proper use of this product, as well as to prevent damage to people and property.

The Table Of Toxic And Hazardous Substances/Elements And Their Content

This Table is prepared in accordance with the provisions of SJ/TI364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
x: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T26572(Due to technical or economic reason, these toxic or hazardous substances cannot be replaced or reduced for now.).

Warnings And Precautions

Please place the shredder ona fiat and level surface, to avoid from malfunction caused by tipping over.
Warning: Do not disassemble, modify or repair the machine by yourself in any way, to avoid electric shock or accidental injury.
Warning: Do not touch the plug with wet hands, to avoid electric shock or accidental injury.
Please unplug and turn off the shredder when discarding the shredded objects, moving, or not using the equipment for a while, to avoid a fire or electric shock.
Warning! Do not splash water onto the machine to avoid a fire or electric shock.
Do not use this equipment next to a heater or air conditioner, in a high temperature and humidity, or dusty place, to avoid a fire or electric shock.
Do not shred tapes, copy papers, fabrics or plastic films, to avoid equipment failure.
Warning! Do not damage or process the power cord or place objects on the power cord, to avoid a fire or electric shock.
In case of smoke, odor or other abnormal conditions, please turn off the power switch immediately and stop using to avoid a fire or electric shock.
Do not use the laminator if the machine or power cord is damaged, to avoid a fire or electric shock.
Warning! Do not let children use this shredder to avoid accidental injury. (This equipment is installed with sharp blades.)
Warning! Do not touch the blades in the feed and shredded outlet slots.
Warning! Do not allow tie, necklace, sleeves, etc. to get pulling into the feed slot. (f it is accidentally entangled, press and hold the “Reverse button to remove the object.)
Warning! please do not allow your hair to get pulled into the feed slot. (If it is accidentally entangled, press and hold the ‘Reverse” button to remove the object.)
Please do not put pins, paper clips, etc. into the feed slot. (If it is accidentally entangled, press and hold the “Reverse” button to remove the object.)
Do not spray any flammable gases into the equipment to avoid a fire.

Packing List

Please check the intact of equipment and inventory all accessories. Please contact the dealer for any defect and/or missing of accessory.

Product Specification

Test data from Deli lab, changes of the test environment and tools may cause deviations.

Maintenance

Unplug the power cord prior to maintenance;
Maintenance is limited to the cleaning of external parts only
When cleaning the external parts, caution must be taken not to drip any water droplets into the interior of the shredder.

Note: When cleaning the outer casing of the shredder, please gently wipe with a soft cloth slightly damped with soapy water or detergent. Caution not to let the cloth enter into the feed slot, and do not use solvents such as gasoline, benzene, paint thinner and detergent.

Product Diagram

Forward
Auto
Off
Reverse
Feed slot
Handle
Visible window
Wastebasket

Step-by-step Instructions

Switch on the 220V power supply in accordance with the voltage specifications of your equipment
Press the Auto” switch button and you may start to use the shredder. The shredder will stop the shredding process automatically till you activate the next shredding operation. Upon the completion of the shredding operation, please press the power Switch ‘Off to turn off the unit.
If you want to stop the file from being shredded, press the manual eject switch ‘Reverse” button, the shredder will immediately reverse and eject your file.
If a jam condition occurs due to an excessive amount or paper, press the Reverse button to eject the excess paper, then reduce the amount of paper and put them in the feeder again.
Shredding an excessive amount of paper will result in an overheated motor issue, and the shredder will stop automatically (which is the uniquely designed automatic protection function to protect the motor from overheating). After the automatic shutdown, the shredder will resume working after around 60-minute cool down period.
The photo-sensing device is located in the middle of feed slot. Place the paper to be shredded from the center of the feed slot

Troubleshooting

Note: If there is a matfunction condition that can’t troubleshoot through the above method please stop using the shredder immediately unplug the power cord and notify the local service unit for service, please do not attempt to disassemble the unit by yourself!

Recycling

Be sure to send used and waste electronics and packaging materials to a special recycling site to prevent uncontrolled waste disposal and facilitate material recycling.

WARRANTY CARD

Thank you for your purchase of our products. The interests of customers who purchase our products will be protected. For any malfunction due to product quality problems. please contact authorized local dealers or service centers with this receipt and the warranty card.

Warranty terms

For product failures occur under normal operating circumstances, free of charge repair and spare parts replacement service shall be provided by our company within one year commencing from date of purchase.
Customers are required to present this warranty card and the original purchase invoice to our company upon request for warranty service. This warranty card shall be valid only after the following form is flled out in details and affixed with oficial seal of the dealer.
No free of charge repair service shall be provided in the event of any of the following circumstances:
Expiration of the warranty period;
Damages caused by improper use, maintenance or storage not in accordance with the requirements of the user manual
Failure or damage resulting from unauthorized disassembly, repair or modification
Failure or damage caused by force majeure;
Wear parts or accessories

This warranty card is being delivered with the product, one card for one product. Please keep this warranty card in proper condition for free warranty service. There is no replacement if lost.

Date of Purchase: Y -M -D

This copy shall be cut along the dotted line and kept by the dealer.

Special Disclaimer

While information of this manual has been rigorously checked and reviewed, we still cannot rule out the possibility of spelling mistakes and technical negligence and/or errors. Such negligence and/or errors will be corrected in the updated version(s) without further notice. The intellectual property of this manual belongs to our company, and no organization or individual is allowed to change the content.