deli E9917 Paper Shredder User Manual
- June 9, 2024
- DELI
Table of Contents
deli E9917 Paper Shredder
Product Outlook & Names
(Picturer only for reference.pis take product for material object as standard )
Operating Procedures
- Connect the power cable & plug.
- Press the power switch button and the indicator light will turn green, indicating that the machine is ready. Toe machine will start to shred automatically and resume the standby mode afterward. Press the power switch button again to shut down the machine after using.
- When you want to stop the operation of shredding paper, you can press “REV” button for sending out them.
- If paper blocked in case of overload ,the indicator light will turn red, the motor will reverse automatically to send out the paper.and the machine will automatically stop. Take out th paper, and the light rums green.
- When the waste-bin is full, the machine will alert automatically. After empty the container.the machine will run again after a moment.
- When the inside temperature is too high after continuous working, there is an overheat protection for the motor to shut off automatically at this time.Let the shredder cool down for 30minutes before operating again.
Product Specifications
packing list
Thank you for purchasing paper shredder, the advanced functions and design of which mostly suit your office. We are confident that the shredder will make a major contribution to destroy used documents and ensure the confidentiality of sensitive materials. To help you correctly use the shredder and prevent you and others from suffering hazards and property losses,please read this manual carefully.
Useage attention
Warning
-
Please the shredder In a steady place and do not overturn it . * Otherwise there is the possibility of breaking the machine.
-
Unauthorized disassembly,rebuilding or service of the shredder is not allowed. Otherwise there is the possibility of electric shock or injury.
-
Do not handle power plug by wet hands. * Otherwise there is the possibility of electric shock.
-
Plug out the power plug from the socket of power supply when dumping paper scraps or moving the shredder.and also in case of long time unused. :z;
-
Otherwise there is the possibility of fire or electric shock.
-
Do not sprinkle water to the shredder. * Otherwise there is the possibility of fire or electric shock.
-
Do not put the shredder beside any heating or cooling equipment or in a place wherehere is high temperature, excessive moist or lots of dust. ,;;,
-
Otherwise there is the possibility of breaking the machine.
-
Never damage or process the power cable.Never put heavy objects on the electric line. ,,,: Otherwise there is the possible of fire or electric shock.
-
In case of abnormal conditions such as emission of smoke odor.please
stop using the shredder. ,i{ Otherwise there is ttie possibility of fire or electric shock. -
If the shredder and power cable have any breakage, please do not use it . ;;, Otherwise there is ttie possibility of fire or electric shock.
Caution
- Danger! Keep out of reach of children. ,ii Blade inside machine. Protect yourself against injury.
- Dangerl Never touch the blade. ,if Blade inside machine. Protect yourself against Injury.
- Keep ties or sleeves away from paper-feeding opening to avoid pulling-in. ,,, When accident happens, press “REV” button and then take II out.
- Keep hair away from paper-feeding opening to avoid pulling -in. ;, When accident happens, press “REV” button and then take it out.
- Please keep the shredder away from flammable gas. ‘” To Avoid a fire
- To refer to text in an accompanying document.
- Only suitable for use in indoors.
- This appliance bears the WEEE mark (Wast e of Electric and Electronic
- Equipment) signifying that, at the end of its life cycle , it should not be disposed of with household waste, but at a recycling centre. The recycling of waste contributes to the conservation of our environment.
Maintenance
- Pull out the power plug from the socket of power supply before maintenance
- The maintenance by user is only limited to cleaning visible surface of the shredder.
- When cleaning the surface of the shredder.do not allow water to drop into the interior of the shredder.
Use cloth dipped with small amount of soap water to clean the exterior of the shredder. The cloth must be closely wrapped around hands during cleaning.so as to avoid the cloth to drop into the paper entrance , and it is prohibited to use organic solvents s uch as gasoline , benzenes solvents or dilution agent to do the cleaning. Decontamination powder must not be used too.
Status Indicator Panel
Status Indicator Panel Power: Machine is connected to the power and ready for paper or disk shredding process. Working: Machine is under operation with paper or disk being shredded. Reverse: Machine is under reserve status and rejects paper or disk from machine. Over-heat: Machine stops working because the temperature is too high. Door open: Scrap box is not properly positioned and need to be repositioned. Paper full: Scrap box Is full and needs to be cleared to resume operation.
Trouble Anal sis & Troubleshooting
In case the above solutions are not able to remove a ny trouble of the shredder.please stop using it immediately, disconnect the power plug and switch off power supply.Contact the local service agency of our company for disassembly and service of the shredder.
WARRANTY CARD
Thank you for your purchase of our products. The interests of customers who purchase our products will be protected. For any malfunction due to product quality problems. please contact authorized local dealers or service centers with this receipt and the warranty cord.
warrantw terms
- For product foflures occur under normal operating circumst ances. free of charge repair end spare parts replacement service shall be provided by our company within one year commencing from dote of purchase.
- Customers ore required to present this warranty cord and the original purchase invoice to our company upon request for warranty service. This warranty cord shall be valid only ofter the following form is filled out in details and affixed with official seal of the dealer.
- No free of charge repair service shall be provided in the event of any of the following circumstances:
- Expiration of the warranty period;
- Damages caused by improper use, maintenance or storage not in accordance with the requirements of the user manual;
- Failure or damage resulting from unauthorized disassembly, repair or modification;
- Failure or damage caused by force majeure;
- Wear parts or accessories.
This warranty card is being delivered with the product, one card for one product. Please keep this warranty card in proper condition for free warranty service. There is no replacement if lost.
Special Disclaimer
While information of this manual has been rigorously checked and reviewed, we still cannot rule out the possibility of spelling mistakes and technical negligence and/or errors. Such negligence and/or errors will be corrected in the updated version(s) without further notice. The intellectual propert y of this manual belongs to our company, and no organization or individual is allowed to change the content.
MODEL
- S220LDS3-1 (9913) S230LDS4-1(9914)
- S230LDS3-1 (9915) S240LDS3-1 (9917)
DELI GROUP CO., LTD
- 301 Xuxiake Ave. Ninghai County
- Ningbo 315600 China Made in China info@nbdeli.com www.deliworld.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>