deli E14400 Paper Shredder User Manual

deli E14400 Paper Shredder

Product Information

The Paper Shredder is a versatile and efficient product suitable for personal as well as office department use. It has a shredding capacity of 70 A4 sheets and can shred CDs or DVDs as well. The shredder can shred paper into small pieces of size (mm) and has a shredding speed of (m/mn). The wastebasket has a capacity of (L) and the product dimensions are (mm). The shredder is equipped with caster wheels for easy movement. The product can run continuously for (run time).

The product is made from various materials including housing, wastebasket, motor core, cables, circuit board, print, and packaging materials. These materials may contain toxic and hazardous substances like lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr), polybrominated biphenyls (PBB), and polybrominated dimethyl ether (PBDE). Users should take care to dispose of the shredded documents and the product responsibly to minimize the impact on the environment.

Product Usage Instructions

1. Place the shredder on a flat and even surface to avoid malfunction caused by tipping over.
2. Do not disassemble, modify or repair the machine by yourself in any way to avoid electric shock or accident.
3. Do not touch the plug with wet hands to avoid electric shock or accidents.
4. Unplug and turn off the shredder when discarding the shredded objects, moving or not using the equipment for a while to avoid fire or electric shock.
5. Do not splash water onto the machine to avoid fire or electric shock.
6. Do not use this equipment next to a heater or air conditioner, in high temperatures and humidity or dusty place to avoid fire or electric shock.
7. Do not shred tapes, cop papers, fabrics, or plastic films to avoid equipment failure.
8. Do not damage or process the power cord or place objects on the power cord to avoid fire or electric shock.
9. In case of smoke, odor or other abnormal conditions, please turn off the power switch immediately and stop using to avoid fire or electric shock.
10. Do not use the machine or power cord if damaged to avoid fire or electric shock.
11. Children should not use this shredder to avoid accident or injury. (This equipment is fitted with sharp blades.)
12. Do not touch the blades in the feed and shredded outlet slots.
13. Avoid letting your hair, jewelry, sleeves, etc. get caught in the feed slot. If it is accidentally entangled, press and hold the Reverse button to remove the object.
14. Do not put pins, paper clips, etc. into the feed slot. If it is accidentally entangled, press and hold the Reverse button to remove the object.
15. Do not spray flammable substances into the equipment to avoid fire.
    Follow these instructions carefully to facilitate proper use of the product and prevent damage to people and property.

Thank you for purchasing our product. This shredder is suitable for personal as well as office department use. We believe the shredding capabilities and confidentiality level of this series of shredders will enable you to dispose your documents in a more efñicient manner. Please read this manual carefully before use, in order to facilitate proper use of this product, as well as to prevent damage to people and property.

The Table Of Toxic And Hazardous Substances/Elements And Their Content

Part name

|

Lead (Pb)

|

Mercury (Hg)

|

Cadmium (Cd)

|

Hexavalent Chromium (Cr)

|

Polybrominated biphenyls (PBB)

|

Polybrominated Dimethyl Ether (PBDE)

---|---|---|---|---|---|---
Housings| ○| ○| ○| ○| ○| ○
Wastebasket| ○| ○| ○| ○| ○| ○
Motor| ×| ○| ○| ○| ○| ○
Core| ○| ○| ○| ○| ○| ○
Cables| ×| ○| ○| ○| ○| ○
Circuit board| ×| ○| ○| ○| ○| ○
Print| ○| ○| ○| ○| ○| ○

Packaging materials

|

○

|

○

|

○

|

○

|

○

|

○

This Table is prepared in accordance with the provisions of SJ/TII364.

• :Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572
• Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T26572[Due to technical or economic reason, these toxic or hazardous substances cannot be replaced or reduced for now).

Warnings And Precautions

• Please place the shredder on a flat and level surface, to avoid from malfunction caused by tipping Over.

• Warning! Do not disassemble, modify or repair the machine by yourself in any way, to avoid electric shock or accidental injury.

• Warning! Do not touch the plug with wet hands, to avoid electric shock or accidental injury.

• Please unplug and turn off the shredder when discarding the shredded objects, moving, or not using the equipment for a while, to avoid o fine electric shock.

• Warning! Do not splash water onto the machine to avoid a fine or electric shock.

• Do not use this equipment next to a heater or air condition, in a high temperature and humidity, or dusty place, to avoid a fire or electric shock

• Do not shred tapes, copy papers, fabrics or plastic films, to avoid equipment failure.

• Warning! Do not damage or process the power cord or place objects on the power cord, to avoid a fire or electric shock.

• In case of smoke, 0dor or other abnormal conditions, please turn off the power switch immediately and stop using to avoid a fire or electric shock

• Do not use the laminator if the machine or power cord is damaged, to avoid a fine or electric shock.

• Warning! Do not let children use this shredder to avoid accidental injury.
  (This equipment is installed with sharp blades)

• Warning! Do not touch the blades in the feed and shredded outlet slots.

• Warning! Do not allow tie, necklace, sleeves, etc. to get pulled into the feed slot. (F it is accidentally entangled, press and hold the “Reverse button to remove the object.)

• Warning! please do not allow your hair to get pulled into the feed slot. if it is accidentally entangled, press and hold the “Reverse button to remove tne ooject.

• Please do not put pins, paper clips, etc. into the feed slot. (If it is accidentally entangled, press and hold the “Reverse” button to remove the object

• Do not spray any flammable gases into the equipment to avoid a fine.

Packing List

Please check the intact of equipment and inventory all accessories. Please contact the dealer for any defect and/or missing of accessory

• Paper Shredder
  Ix

• User Manual
  Ix

• Coster Wheel
  4x

Product Specification

*Test data from Deli lab, changes of the test environment and tools may cause deviations.

4. Maintenance

1. Unplug the power cord prior to maintenance
2. Maintenance is limited to the cleaning of external parts only:
3. When cleaning the external parts, caution must be taken not to drip any water droplets into the interior of the shredder.
   Note: When cleaning the outer casing of the shredder, please gently wipe with a soft cloth slightly damped with soapy water or detergent. Caution not to let the cloth enter into the feed slot, and do not use solvents such as gasoline, benzene, paint thinner and detergent.

Product Diagram

1. CD/DVD slot
2. Paper feed slot
3. Handle
4. Visible window
5. Wastebasket
6. Reverse
7. Standby
8. Forward
   This diagram is for reference only please take the actual product as standard (Shred type varies among different product number)

Step-by-step Instructions

1. Switch on the 220V power supply in accordance with the voltage specifications of your equipment

2. Press the power switch button- on the back of the shredder, and then press the Standby button, the indicator will turn green (blue), which means you may start to use the shredder. The shredder will stop the shredding process automatically till you activate the next shredding operation. Upon the completion of shredding operation, please press the “Standby” switch button to turn off the unit.

3. If you want to stop the file being shredded, press the manual eject switch ‘Reverse button, the shredder will immediately reverse and eject your file.

4. If a jam condition occurs due to excessive amount of paper, the red indicator will prompt the status, and automatically reverse to eject the jammed paper and stop the operation automatically. Once you take out the jammed paper the indicator will turn green (blue) again and will be automatically reactivated by the next shredding operation.
   If the shredder fails to eject the paper automatically, press the manual Reverse button to eject the excess paper. If the jammed paper is too short to be removed by hand, you can also use the “Forward” button to break the paper to clear the jamming.

5. The indicator will flash when the wastebasket is full and normal shredding function will be disabled. The shredder will be reactivated after emptying the wastebasket.

6. Shredding excessive amount of paper will result in overheated motor issue, and the shredder will stop automatically (which is the uniquely designed automatic protection function to protect the motor from overheating). After the automatic shutdown, the shredder will resume working after around one hour cool-down period.

Troubleshooting

Note: If there is a malfunction condition that can’t be troubleshot through the above method,please stop using the shredder immediately, unplug the power cord and notify the local service unit for service, please don’t attempt to disassemble the unit by yourself!

Recycling

Be sure to send used and waste electronics and packaging materials to a special recycling site to prevent uncontrolled waste disposal and facilitate material recycling.

WARRANTY CARD

Thank you for your purchase of our products. The interests of customers who purchase our products will be protected. For any malfunction due to product quality problems. please contact authorized local dealers or service centers with this receipt and the warranty card.

Warranty terms:

1. For product failures occur under normal operating circumstances, free of charge repair and spare parts replacement service shall be provided by our company within one year commencing from date of purchase.
2. Customers are required to present this warranty card and the original purchase invoice to our company upon request for warranty service. This warranty card shall be valid only after the following form is filled out in details and affixed with official seal of the dealer.
3. No free of charge repair service shall be provided in the event of any of the following circumstances:
4. Expiration of the warranty period
5. Damages caused by improper use, maintenance or storage not in accordance with the requirements of the user manual,
6. Failure or damage resulting from unauthorized disassembly, repair or modification;
7. Failure or damage caused by force majeure
8. Wear parts or accessories.
   This warranty card is being delivered with the product, one card for one product. Please keep this warranty card in proper condition for free warranty service. There is no replacement if lost.

Special Disclaimer

While information of this manual has been rigorously checked and reviewed, we still cannot rule out the possibility of spelling mistakes and technical negligence and/or errors. Such negligence and/or errors will be corrected in the updated version[s) without further notice. The intellectual property of this manual belongs to our company, and no organization or individual is allowed to change the content.

DELI GROUP CO., LTD.
301 Xuxiake Ave. Ninghai County
Ningbo 315600 China
Made in China
www.deliworld.com
info@nbdeli.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>