deli E3895S A/3 Laminator User Manual

deli E3895S A/3 Laminator

Thank \IOU for purchasing a Deli laminatm Please use Deli branded laminating pouches with ttle Deli lamlnator which will oreserve your documents and ohotos. maklll!l them waterproof. tear-prollf. cleanable and delicate. Be mindful ttlat removal of lamination could be very difficult and risky. To avoid personal injury or property damage, please read this manual carefully and use the product accordingly.

Attention

• warning: Keep out of the reach of children.
• warning:  Do not touch the pouch inlet with your hand duling operation.
• warning:  Do not touch the surface of the machine with your hand during operlllion.
• warning:  Please do not allow tie, necklace. sleeves. etc. to get pulling into the pouch inlet
• warning: Please do not allow your heir to get pulling into the pouch inle
• warning: Please be cautious of hot surface duling operation.
• Werning:  Do not disassemble or repair the machine by your,ielf In any way; to avoid electric shock or accidental 111JuryJn case that an Item gets pulled Into the lamlnator and the machine falls. please unplug the power cord and contact your dealer or after-salas service center and follow their lnatructiona.
• warning: Do not splash water onto the machine. avoid a fire □r electric shock.
• warning: Do not operate the machine with wet hands. to avoid electric shock or accidental 1111Ul’!l
• Do not allow foreign aitlcles Inside the machine during operation.
• Please place the machine on a fl.;rt desktop for use.
• warning: Do not damage or precess the power cord or place objects on the power cord. to avoid a fire or elechic shock
• In case of smoke, odor or other abnormal conditions. please tum off the power switch immedietaly and stop using, to avoid a fire or electJic shock
• Always unplug the power plug before moving the lamlnato[
• Do not use the laminetor if the machine or power cord is demased. to 81/oid a fire □r electric shock

Safety Instructions

Please Fallaw the fal-n9 precautions to ensure safe use] Placement of the laminator:

1. Do not put the machine In damp place or near the air conditioning vent. to avoid dangerous accidents such as electliclty leakage and Insulation failure.
2. Please ensure the machine is on a flat and level surface.and leave enough space on the side of the pouch outlet
3. Please do not place anything on top of the laminator

Lamlnaung pouch:

1. It Is recommended to use the laminating pouches of our comparTI( Pouch of other speclfjcation or defective pouches may get caught In the lamlnatoi
2. It is recommended to use a laminating pouch 5-Bmrn larger than the item to be laminetad. Inappropriate sized pouches will affect the lamination affect negatively. fthere is no pouch with the rl.!!ht size, a larger pouch may also be used. Please place the item within pouches centered as shown in Figure A below and !Jim it after lamination.

Items to be laminated:

Lamination Is conducted thmll,!h heating and pressur1zatlan. The laminating pouch might be rolled up into the machine due to inconect operation. Therefore, please do not laminate the following items:

1. Inflammable and heat sensitive materials (eg plastic bailS. etc.).
2. Important end unique documents.
3. items with a thickness of mare than t□mm (Inclusive of the laminating pouch).
4. Items that will discolor □r deteriorete after heating_ such as heat-sensitive paper and the paper with when tile laminating patterns drawn with crayons

Laminating Guide

Please oo Not operate as below·

1. Place the open end of the pouch into the machine.
2.  Place the pouch into the machine at an angle.
3. Put the Item to be laminated Into an Inappropriate sized pouch, and leave too much space around your contents
4.  The orl.!!inal items to be laminated ere undulating or cued(
5. Two consecutive pouches are connected together.
6.  Cut the pouch before use.
7. use deformed laminating pouches.
8. The length of the item to be laminated is less than 85mm

Product Diagram

Laminating Guide

• Turn on the lamlnator· connect the power cord, 9Wltch the power on and the power indicawr will turn red.
• Hot lamination: use them,al lamlnatlng pauches(50-200mlc)

1. Toggle the rotary temperature switch to the desired pouch thickness:
2. The machine will take apprmdmataly 3 mlnutas to warm-up_ When the green Indicator Is llt the lamlnator Is ready;
3. If the pouch does not feed correctly or jams, push pouch REl\lllrse· button end the pouch will automatically reverse back out of the lamlnator

• Cold lamination: Use cold laminating pouches. If cold lamination ls required Bfttlr the opamtlon of hot lamlnetion, pmss ‘Setting control” button to change to “Cold lamination· and then keep idle forlO minutes before use.
• Turn off the lamlnator: When finished lemlnat:ln& please press “Setting contrcr button to change to “Cold lamination”, keep idle for 5-10 minuws, and then turn the power offend unplug the mechine3.
• Paper tray: Rlewlth a certain tamperaturecame autfrom film 9JClt and hung cardboard in the squara hole in the back of the machine, plastlc film can fully cooled In order to achieve besteffect
• Installation method: Place the hook on the paper tray into the square hole on the back side of the machine, and make sure that the paper tray Is slightly lower than pouch outlet

Maintenance

1. Cleaning 1Ubber roller: after long-term use of the machine, molten plastic residue will be stuck on the rubber miler, which will easily cause the laminatinS pouch to get stuck in the machine. In addition, the plastic residue will be difficult to remove once solidified, so please remove It carefully: Cleaning steps: please feed medium- thick sheets (such as calendar paper or catalog paper) through the machine without being centered in a pouch, and use hot lamination to laminate It several times.
2. cleaning of the lamlnatar. Please unplug the machine before cl9anlng. and gently wipe with a soft cloth slightly damped with watar. Do not use solvents such gasoline. alcohol or diluent. Never use metal brush, tnol brush or shovel to tap the rubber rolle[ so as ta avoid scratching it
3. Please protect your leminetor from dirt with en appropriate dust cowi when irs not In use for an e>Ctended period of time.

Packing List

Technical Parameters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>