Noyafa NF-521S Infrared Thermal Imager User Manual
- June 9, 2024
- NOYAFA
Table of Contents
Noyafa NF-521S Infrared Thermal Imager
Product Overview
NF-521 S infrared thermal imaging hand held device is a highprecision thermal imaging handheld device. The display method of infrared thermal imaging and visible light can be used to capture the image of each pixel of the target object temperature, and by combining visible light, the state of the object can be photographed more clearly.
Product Buttons And Function Descriptions
-
Charging indication:
The device uses the USB Type-C interface to charge, and the display will stay on and display the current charging percentage during charging. -
Power on and off:
Short press” “to power on, long press to power off. -
Taking pictures and recording videos:
Short press the”trigger button”to take pictures and long press the • trigger button” to record videos when the device is turned on. -
Data transfer:
Connect the computer with a USB Type-C cable, the thermal imager will generate a U disk drive, and you can copy photos and videos to the computer through Windows.
Product Function Operation Instructions
Switch Machine
- Shutdown state,press the” ” to power on,
- In power-on state press the” for a long time to turn off.
Main Interface
- After power-on, the device displays the following main interface.
- In this interface, press to quickly switch color palettes, and press
- keys to quickly switch between visible light imaging and infrared imaging.
- In this interface,” “is invalid. Press to display the following menu
- After the first-level menu pops up, you can select a panel button in the first-level menu through press again, the corresponding second-level menu will pop up, and press· to return to the main interface.
- Similarly, you can select each function button of the secondary menu through and I?> ·,press to confirm the selection of the corresponding function, and press to return to the primary menu. The photo and video functions also take effect in this interface.
Photography And Video
- Short press the” trigger button• to take a photo, the photo format is jpg, and long press the “trigger button • to record a video, and the video format is mp4 format.
Album
- In the main interface, press to pop up the first-level menu, select the album button in the first-level menu through and , and press ” to enter the album. In the album, all the pictures and videos taken are arranged in the order of shooting time, select pictures or videos by• rn •and” rn “, and press to display or play them in full screen.
- Press in display or playback state to switch to the previous or next file of the file. When the playback ends or press”‘ “, it will return to the
- album list interface.
System Settings
Color Palette
The thermal imager provides eight common color palettes, optimized for different scenes, to facilitate the user’s observation of different target objects.
Multlple Image Dlsplay Mode Settings
Image display mode Icon
- Infrared
- Visible Light
- Picture In Picture
- Edge Fusion
- Superimposed Fusion
- Fusion Degree Adjustment
- Fusion Deviation Adjustment
Image mode can be selected according to
- Open the Image Mode icon
- Select the image mode as required
The picture mode display effect is as follows
Temperature measurement method
-
Routine Temperature Measurement
Support the central point measurement temperature, high temperature, low temperature continuous tracking. -
Regional temperature measurement
Some areas can be selected for center point, high and low temperature tracking test, and this temperature measurement area can be zoomed in and out to meet the needs of different scenarios.
Product packing list
Note: Please refer to the actual item received.
Product Specification
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>