EATON ETR2 Timing Relay Instructions
- June 9, 2024
- EATON
Table of Contents
ETR2 Timing Relay
Instructions
ETR2
Instruction Leaflet
ETR2 Timing Relay
Electric current! Danger to life!
Only skilled or instructed persons may carry out the following operations.
| 0.5…0.8 Nm
4.43…7.08 lb.in
---|---
| 2 x 0.5…1.5 mm² / 20…16 AWG
1 x 0.5…4 mm² / 20…12 AWG
| 2 x 0.5…1.5 mm² / 20…16 AWG
1 x 0.5…2.5 mm² / 20…14 AWG
| 2 x 0.5…1.5 mm² / 20…16 AWG
1 x 0.5…2.5 mm² / 20…14 AWG
Additional information relating to cULus approval:
– Pollution degree 2
– Copper wire (Cu) 75 °C only, 0.8 Nm
– Individual CO contact: same polarity
Temporization Travail
OFF-delay with auxiliary voltage
Impulse-ON
Impulse-OFF with
auxiliary voltage
Flasher, starting
with ON
Flasher, starting
with OFF
Pulse generator,
starting with ON or OFF
Pulse former
EU: Eaton Industries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
UK: Eaton Electric Ltd., P.O. Box 554, Abbey Park,
Southampton Road, Titchfield, PO14 4QA, United Kingdom
© 2023 by Eaton Industries GmbH
Eaton.com/recycling
Eaton.com/contacts
Eaton.com/aftersales
Eaton.com/documentation
USA: Eaton.com/eatoncare
+1 877-386-2273
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>