westfalia ATD18 18 V Li-Ion Battery-Powered Twin-Drill Instruction Manual

18 V LI-ION AKKU TWIN-DRILL ATD18
18 V LI-ION BATTERY-POWERED TWIN-DRILL
ATD18
Art.Nr. 94 54 61

ATD18 18 V Li-Ion Battery-Powered Twin-Drill

1. Keyless chuck
2. Gear head locking switchTorque adjustment
3. Hexagon socket
4. ON/OFF switch
5. Direction of rotation switch
6. Gear shift
7. Battery
8. Hanger

Dear Customers,
Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference.

1. Unbox device
2. Attach the hanger
3. Insert battery
4. Change of bit holder and drill chuck
5. Insert drill
6. Insert bit
7. Set left / right rotation
8. Adjust the torque
9. Change gear
10. Start device
    

In the drilling position, the torque setting is deactivated, since drilling is always carried out with the maximum torque value.
When screwing, you screw automatically in 1st gear, regardless of the gear selected.

TECHNICAL DATA

KpA = 5 dB(A)
Sound power level| LWA = 78,6 dB(A)
KwA = 5 dB(A)
Hand-arm-vibration*| ah = 1,061 m/s2
K = 1,5 m/s2
Drilling and screwing| 0 – 400 min-1
Drilling| 0 – 1500 min-1

The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method. The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning!
The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined. It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

SAFETY NOTES

**** Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury.

• Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.
• Never leave the Twin Drill unsupervised. Keep out of reach of children or persons in need of supervision.
• Operate the charger only on 230 V power mains. Use only the included charger to charge the battery.
• Protect the battery and the charger from moisture. Do not operate the charger outdoors.
• Disconnect the charger from the power mains while it is not used or before undertaking any cleaning or maintenance.
• Treat the machine with care. Do not drop it and do not expose it to mechanical stress or extreme temperatures. Do not allow liquids of any kind to enter the machine.
• In the case of a malfunction have the unit repaired only by a professional or contact our customer support. Do not attempt to repair the machine yourself.
• Charge, operate and store the battery only in temperatures between 10ºC and 40ºC.
• Do not disassemble burn or short-circuit batteries.

Additional Battery and Charger Safety Notes
WARNING: Li-Ion batteries, if incorrectly used, stored or charged are a fire, burn and explosion hazard.
Use the battery charger correctly

• Refer to the section of this manual relating to use of the battery charger before attempting to charge the battery.

• Do not attempt to use the charger with other batteries. Keep the battery charger clean; Foreign objects and dirt can cause a short circuit and block the ventilation holes. Failure to follow these instructions may result in overheating or fire.

• Allow batteries to cool for 15 minutes after charging or heavy use. Failure to follow these instructions may cause overheating or fire.

• Use only chargers recommended by the manufacturer to charge the batteries. If a charger is not suitable for a certain kind of battery there is a risk of fire.

• Use power tools only with specifically designated battery packs.

• Use of any other battery packs may create a risk of injury and fire.

• The device is designed for operation in altitudes of up to 2000 m above sea level. Keep the battery out of reach of children. When not in use batteries should be stored at room temperature (approx. 20˚ C).

• Do not open, disassemble, crush, heat above 60° C or incinerate. Do not dispose of in fire or similar.

• Keep the battery away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• If used incorrectly, liquid may leak from the battery. Avoid contact with it.
  In case of accidental contact, rinse with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

• Always switch off the heat gun after work. Please note that the device is still very hot. There is risk of injuries and fire!

• Be careful when using the unit near flammable or easy fusible materials such as plastics or glass. Do not direct the unit for long time at the same place. Never point the running unit to people, animals, plants, flammable objects or liquids.

• Do not use the unit in explosive atmosphere.

• Be aware that heat may be conducted to combustible materials that are out of sight.

• Please note that poisonous gases may be emitted while removing paint. Use suitable inhalation protection and ensure adequate ventilation.

• Keep the air slots and the nozzle clean to avoid overheating the unit and to prevent from fire hazard.

• Use original accessory only.

• Should the unit become damaged do not use it any further and have it repaired by a professional or contact our customer service. Do not disassemble the unit or try repairing it yourself.

Batteries do not belong in the household garbage.
For battery disposal please check with your local council.

EU DECLARATION OF CONFORMITY

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen, declare by our own responsibility that the product
18 V Battery Powerd Twin-Drill ATD18
Article No. 94 54 61
is according to the basic requirements, which are defined in the European Directives and their amendments.
2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)
2014/30/EU
Electromagnetic Compatibility (EMC)
EN 55014-1:2017+A11, EN 55014-2:1997+AC+A1+A2
2006/42/EC
Machinery
EN 62841-2-1:2018+11:2019, EN 62841-1:2015
The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany.
Hagen, 01st of January, 2022

Thomas Klingbeil,
QA Representative

CUSTOMER SERVICES

DEUTSCHLAND
Westfalia
Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de| ÖSTERREICH
Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at| SCHWEIZ
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-ersand.ch
---|---|---

DISPOSAL

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

Gestaltung urheberrechtlich geschützt
**** ©Westfalia 01/22

References

• Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>