Spok GenA Version 2 Pager User Guide
- September 23, 2024
- spok
Table of Contents
Spok GenA Version 2 Pager User Guide
TURNING PAGER ON
Press the ENTER button for 3 seconds to turn the pager on. A startup screen is
momentarily displayed, and the pager alerts with the currently selected alert-
mode (vibe, audio, silent).
IMPORTANT: The pager has an internal power reservoir. If the reservoir is
depleted when a new battery is inserted, it may take up to 15 seconds before
the pager can turn on.
TURNING THE BACKLIGHT ON MANUALLY
Press ESCAPE for 2 seconds.
MAIN SCREEN
As you navigate through the Main Screen, the highlighted icon will change to
indicate the current location of the cursor Press LEFT or RIGHT to navigate
through the Main Screen Press to ENTER to select the highlighted icon
SETTINGS MENU
As you navigate through the Settings menu, the row highlighted will indicate
the current position of the cursor Press UP or DOWN to navigate through the
menu list Press ENTER to select the current function Press ESCAPE to exit the
Settings menu
TURNING PAGER OFF
From the Settings menu:
Press DOWN to move the cursor to show Pager Off Press the ENTER and select
Turn Off from the popup and press ENTER
RECEIVING/READING MESSAGES
From the Inbox or a Groups folder:
Press DOWN to move the highlight to the message you want to read Press ENTER
to read the message Press RIGHT or LEFT to move down or up the message list
page by page
DELETING A MESSAGE/ALL MESSAGES
To delete a single message:
Press UP or DOWN to select the message you want to delete Press ENTER for 2
seconds and move the highlight to show Delete Press ENTER to delete the
message To delete all read messages or all messages (From the Message List
screen):
Press ENTER for 2 seconds, then press UP to move the highlight to show either
Delete Read Msgs or Delete All Msgs Press ENTER to delete all read messages or
all messages
MOVING A MESSAGE TO THE SAVED FOLDER
Press UP or DOWN to select the message you want to move Press ENTER for 2
seconds and move the cursor to show Save Press ENTER to save the message
LOCKING AND UNLOCKING MESSAGES
Messages can be locked to prevent them from being accidently deleted or from
being automatically replaced when the memory is full Press UP or DOWN to
select the message you want to lock or unlock Press ENTER for 2 seconds and
move the cursor to show Lock or Unlock Press ENTER to lock or unlock the
message
SETTING MESSAGE FONT SIZE (Text size)
From the Settings menu:
Move the cursor to show Message Font Size Press ENTER to display the Message
Font Size selection popup Press UP or DOWN to select the text size desired and
press ENTER
SETTING DATE AND TIME
Press DOWN to move to the Set Date & Time option and press ENTER Press ENTER
to select the Set Date & Time option Press UP or DOWN to change the hours’
time value Press LEFT or RIGHT to move to the other settings Press ENTER to
activate and exit to the main screen
SETTING INBOX OR GROUPS FOLDER ALERTS
From the Settings Menu:
Press DOWN to move to the Folder Alerts option and press ENTER Press ENTER to
select the Inbox option or DOWN & ENTER to select a specific Groups folder
Press DOWN to move to the Type, Front Light, Reminder Alert or Continuous
Alert options and press ENTER to select Change the option setting(s) as needed
QUIET MODE When Quiet Mode is on, all audible device alerts are changed to
vibe.
When set to off, all audible alerts are restored
From the Settings menu:
Move the cursor to show Quiet Mode and press ENTER Press UP or DOWN to change
the setting to On or Off
SETTING THE ALARM
From the Settings menu:
Move the cursor to show Alarm and press ENTER Press ENTER to select the Type
screen Press UP or DOWN to select the Alarm type (Off, One Time, Daily) and
press ENTER Press DOWN to select the Set Time screen Press UP or DOWN to
change the hours’ time value Press RIGHT to move to the minutes’ value and
change it Press ENTER to activate and exit to the main screen An alarm status
icon will appear on the bottom row of the main screen SETTING DO NOT DISTURB
TIME (If feature is available in Settings) Do Not Disturb sets a time period
when the device will receive messages without alerting
From the Settings menu:
Move the cursor to show Do Not Disturb and press ENTER Press ENTER to select
the Mode screen and select Enabled Press DOWN to select the time range and
press ENTER Adjust the From and To times to reflect when the Do Not Disturb
time period should start and end.
Press UP or DOWN to change the start hours’ time value Press RIGHT to move to
the From minutes’ time values and press UP or DOWN to adjust as needed.
After setting the start time, repeat the previous steps to set the To time and
press ENTER to set The Alert at End option controls whether the pager will
alert at the end of the Do Not Disturb time if a message was received
SETTING DISPLAY LOCK (Feature only available with message encryption)
From the Settings menu:
Move the cursor to show Enable Lock Code Press ENTER to display the Enable
Lock Code screen Press a four-button sequence and remember it Press ENTER to
activate the lock
- Display lock will activate after 5 minutes of pager inactivity. For immediate activation select Lock Now from the Settings menu
- Select Disable Lock Code from the Settings menu and enter the current passcode to disable the display lock
Gen A Icons and Symbols
Main Screen Folder Icons
Inbox
Groups (optional)
Saved
Settings
Main and Time Screen Status Row Icons (Bottom Row)
Audio Alert
Silent Alert (Vibration)
Disabled Alert (Silent)
Alarm Enabled
Full Battery Status
3/4 Battery Status
Low Battery Status
New Message
Full Encrypted Message Support
Do Not Disturb active
2/4 Battery Status
1/4 Battery Status
General Navigation Indicators
Before Page
Next Page
Current Setting
Message Status Indicators
Unread Message Indicator
Locked Message Indicator
Unread & Locked Message Indicator
Duplicate Message Indicator
Unread & Duplicate Message Indicator
GenA Document Downloads
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>