BOCCI 38.12V Ceiling Mounted User Manual
- June 4, 2024
- BOCCI
Table of Contents
BOCCI 38.12V Ceiling Mounted
OVERVIEW
PRODUCT SPECIFICATION
- PENDANTS: twelve
- MOUNTING: 94mm (3.7”) x 6mm (0.24”)
- LAMPING: 1.5w LED
- STEM LENGTH 3.7m (12’) long stem
- ADDITIONAL
- EXTENDERS
- 153mm (6”) / 305mm (12”) / 914mm (36”) /
- 1524mm (60”)
- MATERIALS: blown glass, electrical components, unlacquered brass or black powder coated brass stem, black or white canopy
- WEIGHT: approximately 34kg (75lb)
- POWER SUPPLIES: remote mounted
DESCRIPTION
The stem ceiling mounted system comes in unlacquered brass or black powder coated stem with a 94mm (3.7”) diameter mounting plate rated for ceiling use. 38V is a variant of the original 38 series where a large glass sphere is blown with a multitude of haphazard interior cavities, which intersect and collide in unpredictable ways. 38V is smaller, lighter and suspended with coaxial cables. The interior cavities can be fi lled with plants or left empty.. Standard 38V are made with clear glass exterior spheres and milk white interior lamp holder cavities.
NOTES
- + Purchase replacement lamps online at www.bocci.com/shop/bulbs
- + The brass used in our Stem Series is untreated and, as such, will develop a natural patina over time. To avoid any marking or tarnish on the brass during handling and installation, please use the gloves provided in your shipment.
- + To maintain your fi xture, please regularly dust with a lint-free cloth. If further cleaning is required, dampen a lint-free cloth with water only and wipe gently to remove dust or debris.
PRODUCT INSTALLATION INSTRUCTIONS
-
Thread the cover cap on one end of the stem.
Note: Bocci recommends wearing thin gloves during installation to protect the stem fi nish and the glass surface. -
Connect the stem pieces by threading the stem connector to the stems.
Note: This step is only necessary for overall stem lengths longer than 1.8m (6’). -
Thread the pendant mounting plate onto the stem. Carefully insert provided lamp into socket.
-
Connect power supply to line voltage.
-
Connect input low voltage wire to 12V DC output wires.
-
Connect the black wire to line wire and white wire to neutral wire.
-
Ensure that line voltage is not active during this part of the installation!
Note: Mount power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certifi ed personnel to ensure compliance with the code. -
The client is responsible to ensure fasteners are attached to a robust structural substrate. Affi x mounting plate to surface with fasteners provided. Thread canopy cover onto the mounting plate. Thread on the stem to canopy. Turn power to fi xture on.
-
Gently thread pendant onto the stem. Be sure to carefully place the pendant so as not to damage the lamp during installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>