Brook Steel Knight Xbox Wireless Controller User Manual
- June 9, 2024
- Brook
Table of Contents
Brook Steel Knight Xbox Wireless Controller User Manual
- The product supports wireless connection with Xbox Series X|S and Xbox one.
- PC Series and other Xbox Series consoles support the wireless adapter (optional) for wireless connection.
- All the series of Xbox consoles and PC support wired connection.
- Support all kinds of customized keys to elevate the gaming play.
- Selective fine texture with skidproof feature enhances the smoothness during operation.
- 3.5mm stereo headphone port is supported to give a more immersive experience of sounds.
- Support “Pairing Memory” feature
Thank you for purchasing this product. This user’s manual introduces all the connection methods supported by this device in detail, as well as various personalized features and operation methods. Please read carefully to be of great fun while playing games.
Package and Accessories
-
Controller x1
-
Type-C Cable x1
-
Carrying Bag x1
Product Specifications
- Name: Steel Knight – Xbox Wireless Controller
- Model: ZPPU000
- Dimensions: L155 x W103.5 x H64.5 mm
- Battery Capacity: 1200mAh
- Input Voltage: DC5V / 500mA
- Connection Method: Wired / Wireless
- Connector Type: Type-C
- Charging Time / Battery Life: About 3.5 hours / About 8 hours
- Weight: 245 g
Key Descriptions
Connect with Xbox Series X|S / Xbox One
- Turn on the power to start Xbox Series X/S console.
- Press the Wake-up Key on the controller (Brook Chameleon Key) to start the product.
- First press the Connection Key “)))” on the console, and the indicator on the console will flash rapidly. And then press the “)))” on the front end of the controller. The indicator (Xbox LED) on the controller will flash rapidly while searching for signals, and it is solid on while pairing is done.
- The controller has the feature of “Pairing Memory” while paired upon wireless connection. Once the controller was connected with the console before, it would be connected again if users press the Wake-up Key (Brook Chameleon Key); the console can remember the most 5-7 controller successively. If the connection fails, please repeat the steps above for reconnection and re-pairing.
- Connecting the controller with Type-C cable can serve as the wired controller on the consoles of XBOX Series X|S or XBOX ONE and PC.
- When used on PC, it’s required to use with the original wireless adapter, or use USB-C cable to connect the controller and the PC.
Features and Functions
Customized for Macro Records
Each back key, M1/2/3/4, can record and store 32 gaming actions within 30 seconds (up, down, left, right, A, B, X, Y, LB, RB, LT, RT, R3, L3, left joystick and right joystick). Meanwhile, it supports multiple keys to be operated at the same time.
-
Press and hold Program Key, and then press the customized key (M1 to M4) you want to set. Then release the key, the LED indicator on the top will be on, and Macro recording mode is entered.
-
Take setting M1 as the customized key as an example. After pressing M1, users can start to record the customized gaming actions (within 32 actions) in 30 seconds And then press M1 again to complete the setting and LED indicator will be off.
When you only set 1 recording for the Macro (M1-M4), it will be outputted in the way of Remap.
Cancel Macro Setting
Take cancelling M1 as the customized key as an example. Press and hold Program Key, and then press M1. Then the LED indicator is on, press M1 again to cancel the customized key.
Temporarily Close or Fully Cancel (M1-M4) Macro Keys at a Time
- To fully clear the Macro at a time: Press and hold Program and Menu Keys at the same time for 3 seconds to fully clear the Macro settings.
- Temporarily close and start the Macro: Press and hold Program Key and short press Menu Key once to close the Macro setting temporarily.
- Press and hold Program Key, and press Menu Key twice to open the Macro again.
Auto Macro Setting Mode (M1-M4)
Take setting M1 as the customized key as an example. After starting to record
the
customized gaming actions (within 32 actions), users can complete the
autoMacro setting by pressing Program and M1 at the same time.
Temporarily Close Auto Macro Setting
Take setting M1 as the customized key as an example. When following the steps
to
set auto Macro keys, press M1 again to close the auto Macro setting
temporarily. After the temporary close, press M1 again, and then the auto
Macro will start.
Each of the 4 back keys (M1-M4) can be set as auto Macro, but only one set can be ▪ triggered at a time.
Descriptions of Turbo Key Functions
Turbo Mode
-
Normal Turbo Mode:
Press and hold Program Key, and press “Key to set Turbo”. Then Program LED will be on. After setting the key, Program LED will be off, and the Turbo setting is completed. -
Output of auto Turbo mode:
Press and hold Program Key, and press “Key to set Turbo” twice. Then Program LED will be on. After setting the key, Program LED will be off, and the auto Turbo setting is completed. -
Descriptions to cancel Turbo mode function:
Press and hold Program Key, and press “Key to set Turbo” three times. Then Program LED will be on. After setting the key, Program LED will be off, and the Turbo setting is cancelled. -
To fully clear the turbo function:
Press and hold program and view key at the same time dor 3 seconds to fully clear the turbo function.
Temporarily Close or Fully Clear Turbo Key at a Time
-
Fully clear at a time:
Press Program and Share Keys at the same time to clear all the Turbo sett -
Temporarily close and start:
Press and hold Program Key, and press Screenshot Key (3 sec) once to close the Turbo setting temporarily and macro setting.
Press and hold Program Key, and press Screenshot Key twice to start the Turbo functions again.
Adjust the Turbo frequency to 5 times/second, 10 times/second, 15 times/second or 20 times/second
-
Increase the Turbo frequency:
Press Program Key + Left of D-Pad- Users can increase the Turbo frequency. The default setting: 10 times/second.
-
Decrease the Turbo frequency:
Press Program Key + Right of D-Pad.- Users can decrease the Turbo frequency. The default setting: 10 times/s
Descriptions to adjust the motor vibrations
The motor vibration can be adjusted in four levels based on diverse demand: Weak/Medium/Strong/off.
-
Intensify the motor vibration:
Press Program Key + Up of D-Pad- Users can intensify the motor vibration. The default strength: Medium.
-
Reduce the motor vibration:
Press Program Key + Down of D-Pad- Users can reduce the motor vibration. The default strength: Medium.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interfe r – ence that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsi ble for compliance could void the user’s authority to operate the equipment. This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditionwithout restriction.
Attentions
This product is not suitable for children of 3 years old and under. Please do
not put this product in high temperature or high humidity environment Do not
try to disassemble this product in case of any unnecessary damage to the
product. This product contains built-in battery. Please do not throw it away
with domestic garbage.
Do not charge the product near fire or other heat sources.
Non-professionals should not disassemble this product; otherwise aftersales service will not be provided.
2ADKM1712
P/N : Steel Knight
M/N: ZPPU000
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada licence-exempt
RSS(s). Operation is subject to the following two conditions
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- The device has been evaluated to meet general RF exposure requirement.
- The device can be used in portable exposure condition without restriction.