Lachy DSV7 2500mAh Sweeper Battery Instruction Manual

June 14, 2024
Lachy

Lachy DSV7 2500mAh Sweeper Battery

Lachy DSV7 2500mAh Sweeper Battery

Specifications

Model No.: DSV 7
Product Size: 13081125mm±0.5
Battery Type: Li-ion Rechargeable Battery
Nominal Voltage: 21.6V Unit
Weight: 422±5g
Charging time: 4-5 hours
Operating temperature range : -20℃~40℃

Compatible Models

Dyson SV11: Dyson V7 Car + Boat
Dyson V7 Absolute: Dyson V7 Trigger
Dyson V7 Motorhead pro: Dyson V7 HEPA
Dyson V7 Trigger: Dyson V7 Fluffy
Dyson V7 Animal Pro+: Dyson V7 Mattress…

Installation Methods

  1. Push the red lever down a second time to release the bin.
    Installation Methods

  2. Use a Phillips #2 screwdriver to unscrew the battery pack.
    Installation Methods

  3. Use a Phillips #2 screwdriver to unscrew the handle.
    Installation Methods

  4. Pull the battery pack down and away from the device.
    Installation Methods
    Lachy DSV7 2500mAh Sweeper Battery

The Charging Indicator

  1. The battery is charging or using: green light.
  2. Charge completed : light off.
  3. Overcurrent protection: red light will light up.
  4. Short-circuit or overheat protection: red and green lights are flashing..
    Charging or using, green light is on. Full charge, light is off.|

Green light

---|---
These two kinds of indicators mean that the battery is in the protection state, please wait for cooling down before charging to restore the battery.|

**Red light

**

|

**Red and Green flash

**

SAFETY NOTES

  1. Each replacement battery comes with only a small amount of charge, please fully
    charge it before use.

  2. Do not charge the battery immediately after it is depleted . Please cool down for 10-20 minutes before charging. This is important, especially after using MAX mode.

  3. Do not use vacuum cleaner or press the battery button while charging , it will damage your battery.

  4. If you are not going to use the battery for a month or more, store it in a clean , dry , cool place away from heat and metal objects.

  5. NiCd, NiM H and Li -Ion batteries will self-discharge during storage, please charge the batteries before use.

Frequently Asked Questions

Q1: Why do you press hard when using vacuum?

A: It may be the screw of the vacuum is loose, please tighten it with a screwdriver.

Q2: Why the vacuum turns off automatically when it is used?

A: It may be that there is too much dirt on the vacuum filter or the battery is overheated. We recommend customer to clean the filter before using or let the battery cool down.

Q3: Why battery is no power?

①Make sure your battery has been charged. ② Check the battery casing to make sure that it is not cracked or damaged. ③ Make sure your machine’s airway isn’t blocked.

Symbols

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals