VENTURE LIGHTING AK0007 LED Wall Pack Fixture User Manual
- June 9, 2024
- VENTURE LIGHTING
Table of Contents
VENTURE LIGHTING AK0007 LED Wall Pack Fixture User Manual
Installation Using Mounting Brackets
-
Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance.
-
Remove the existing luminaire. Dispose of the existing lamp(s) and ballast(s) per local requirements.
-
Rotate the 3 mounting brackets on the back of the fixture as desired (Figure 1).
-
Secure the fixture to the wall fix (Figure 2 & 3).
-
Make the appropriate wiring connections.
-
Close the fixture and restore power to the fixture
Installation Using Internal Mounting Fasteners
-
Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance.
-
Remove the existing luminaire. Dispose of the existing lamp(s) and ballast(s) per local requirements.
-
Remove the back cover from the fixture (Figure 4).
-
Secure the back cover to the wall fix (Figure 5).
-
Place the front of the fixture onto the back cover and make the appropriate wiring connections.
-
Close the fixture and restore power to the fixture.
WARNING
Risk of fire and electric shock
- Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance. Contact a qualified electrician for installation.
- Venture Lighting’s LED wallpack fixture installation requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Suitable for use in wet location.
- MIN. 75°C supply conductor should be used.
800-451-2606
6675 Parkland Blvd., Suite 100
Solon, Ohio 44139 USA
E-mail:
[email protected]
VentureLighting.com
© 2022 Venture Lighting International
Venture Lighting is a registered trademarks of Venture Lighting International.