VENTURE LIGHTING AK0010 LED Wall Pack Fixture User Manual
- June 9, 2024
- VENTURE LIGHTING
Table of Contents
VENTURE LIGHTING AK0010 LED Wall Pack Fixture User Manual
Before You Begin
Read These Instructions Completely and Carefully
Installation Using Mounting Brackets
- Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance.
- Remove the existing luminaire. Dispose of the existing lamp(s) and ballast(s) per local requirements.
- Loosen the screws on the side of the fixture. (Figure 1)
- Open the fixture and disconnect the quick disconnects which connect the LED driver to the LED module. (Figure 2)
- Drill mounting installation holes needed for the installation into the back of the fixture. (Figure 3)
- Loosen the plug on the back of the fixture, route the wiring through the hole and mount the back of the fixture to the junction box. (Figure 4)
- Connect the supply wires to the fixture input wiring.
- Connect the quick connect terminals which were removed in Step 4.
- Secure the fixture closed by tightening the screws on the side of the fixture. (Figure 5)
- Power can now be restored to the system.
800-451-2606 VentureLighting.com
WARNING
Risk of fire and electric shock
- Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance. Contact a qualified electrician for installation.
- Venture Lighting’s LED wallpack fixture installation requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Suitable for use in wet location.
- MIN. 75°C supply conductor should be used.
800-451-2606
6675 Parkland Blvd., Suite 100
Solon, Ohio 44139 USA
E-mail:
[email protected]
VentureLighting.com
© 2022 Venture Lighting International • Venture Lighting is a registered trademarks of Venture Lighting International.
AK0010-B
References
Read User Manual Online (PDF format)
Loading......