Ariete 2759 Handy Force Stick Vacuum Cleaner Instructions Manual

Ariete 2759 Handy Force Stick Vacuum Cleaner

WITH REGARD TO THIS MANUAL

This appliance is made in conformity with appropriate European Regulations in force, to protect the user wherever possible from potential hazards. Even if you are familiar with this type of appliance, carefully read this manual before use. Only use this appliance for the purpose it is designed for in order to prevent accidents and damage. Keep this manual close by for future consultation. If you should decide to give this appliance to other people, remember to also include these instructions.
The information provided in this manual is marked with the following symbols indicating:

• Danger for children
• Danger due to electricity
• The danger of damage originating from other causes
• Warning – material damage

IMPORTANT SAFEGUARDS

READ THESE INSTRUCTIONS CAREFULLY.

This appliance is designed solely for household and similar uses such as:

• in cooking areas used by personnel of shops, offices, and other professional environments; on farms;
• guests of hotels, motels, and other residential environments; bed and breakfast type of environments.
• Do not collect hot ashes, liquids, big glass pieces, rubble, or pointy or sharp objects.
• Do not use the appliance without the filters or if the filters are damaged.
• We decline any responsibility resulting from misuse or any use other than those covered in this booklet.
• We suggest you keep the original box and packaging, as our free-of-charge service does not cover any damage resulting from inadequate packaging of the product when
• this is sent back to an Authorised Service Centre.

Danger for children

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children unless they are aged 8 years and above and supervised.
• Children must be supervised at all times to ensure they do not play with the appliance.
• Do not leave the packaging near children because it is potentially dangerous.
• In the event that this appliance is to be disposed of, it is suggested that the power Cord is cut off. It is also recommended that all potentially dangerous components including the power cord are rendered harmless to prevent personal injury. Do not let children play with the appliance or its components.

Danger due to electricity

• Always keep the appliance and the power cord out of the reach of children under the age of 8 years.
• Do not let the power cord of the charger hang in a place where it could be grasped by a child.
• Before plugging the appliance into the mains socket, ensure that the voltage shown on the rating plate placed on the charger matches the local voltage supply.
• The use of extensions not approved by the manufacturer can result in damage to property and personal injury.
• Never put live parts into contact with water: It can cause a short circuit! The appliance must not be power supplied by external timers or separate re- mote-controlled systems.
• During the charge choose an adequately illuminated and clean room with an easily accessible power outlet.
• Unplug the appliance when it is not being used and before all maintenance and cleaning operations.
• Do not immerse the appliance in water o Make sure that your hands are dry before using or adjusting the switches on the appliance, or before touching the plug and power connections.

The danger of damage originating from other causes

• Never leave the appliance unattended when it is connected to the power supply.
• The appliance is not to be used if it has been dropped or if there are visible signs of damage. Do not use the appliance if the power cord or the plug is damaged, or if the appliance is faulty. To prevent any accident, all repairs, including the replacement of the power cord, must be carried out by an Authorised Service Centre or by suitably qualified personnel.
• Do not insert any objects into the openings of the appliance and avoid any objects obstructing the airflow.
• Keep the openings free of dust, lint, hair, etc.
• Do not use the appliance without the filter.
• Do not collect very hot objects or objects that are smoking or burning such as cigarettes, matches, or ashes that are still hot.
• Do not pick up flammable or combustible material (volatile liquids, such as gasoline, kerosene, etc.) or use it in the presence of large amounts of water.
• Do not use the appliance in closed environments and in the presence of fumes given off by oil-based paints, solvents, or waterproofing agents, or by flammable power or other toxic or explosive fumes.
• Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, acids, etc.)

Warning! – material damage

• The appliance must be left at rest on a stable surface.
• If the appliance is turned upside down the dust and dirt can fall out. Make sure that the appliance won’t be turned upside down during use.
• Before cleaning shiny surfaces, such as parquet or linoleum, check that the brush and its bristles are free from materials that could damage the floor.
• To avoid damaging the floor. Don does not insist on the brush on the same area on delicate surfaces.
• On waxed surfaces, the brush movement can create rings. If this happens clean it with a damp cloth, polish it with wax, and wait for it to dry.
• Do not place the appliance or the charger on very hot surfaces or near open flames to prevent the body from being damaged.
• The cable of the charger must not touch the hot parts of the appliance.
• Do not use the appliance outdoors.
• Do not put the appliance or the charger near or over hot electric stoves or burners or near a microwave oven.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

DESCRIPTION OF THE APPLIANCE

• A Brush position switch
• B Brush
• C Brush release button
• D Electrical connections
• E Tube
• F Motor body release button
• G Motor body
• H On/Off button
• I Lid
• J Air outlet filter
• K HEPA filter
• L Motor protection filter
• M Handle
• N Dust container
• O Lever for unlocking the dust container lid
• P Motorized brush
• Q Nozzle
• R Wall mount
• S Wall plugs (x 3)
• T Screws (x 3)

Identification data

On the label under the base of the appliance are reported the following identifications data of the appliance:

• manufacturer and CE marking
• model (Mod.)
• serial number (SN)
• electrical supply voltage (V) and frequency (Hz)
• electrical power consumption (W)
• assistance toll-free phone number

When ordering at Authorized Service Centers, indicate the model and serial number.

INSTRUCTIONS FOR USE

Remove the packaging materials from the inside and outside of the appliance. Remove all the stickers. Grab the motor body (F) by the handle (P). Assemble the tube (E) on the motor body (Fig. 2).

Assemble the tube on the brush (B) (Fig. 3).

Warning!

Appliance fall danger. The appliance, once it is assembled, cannot stand on the brush in a vertical position.

• Insert the plug into a power outlet. Press the ON/OFF button (G). Ihe appliance starts working at the maximum power
• Press the brush switch (A) to position (2) for cleaning hard surfaces such as floors (Fig. 4).
• Press the brush switch (A) to position (1) for cleaning soft surfaces such as carpets (Fig. 4).

Warning!

Switch the appliance off immediately in the event that something gets trapped inside the brush, such as a piece of cloth, the fringes of a carpet, etc. Before turning on the appliance again, remove anything that caused the obstruction of the aspiration ducts.

When the dust reaches the MAX lever you need to empty the dust container (O). Switch off the appliance. Disassemble the tube. Take the motor body to a trash bin. Push the unlocking lever of the dust container lid (N). Empty all the dust (Fig. 5). Close the dust container lid. The appliance can be used with the tube and the brush or with the brush built directly on the motor body (Fig. 6). The appliance is provided with two accessories, a multifunction brush (L) and nozzle (M). The accessories can be built on the tube to reach the highest points. The accessories can be built directly on the motor body to clean the windows and the interior of the car (Fig. 7-8).

AFTER USING

Switch off the appliance. Empty the dust container. Disassemble the motor body from the tube. Put the appliance in a dry place and away from the reach of children. Alternatively, use the support to hook the appliance to the wall. The support is supplied (R) with the specific screws (S) and the specific wall plugs (T). Place the support on the wall. Adjust the height of the support on the wall according to the height of the appliance. Using a pencil, make marks on the wall corresponding to the three holes in the support. Remove the support from the wall. Drill the wall with the drill at the markings. Insert the supplied wall plugs (T) into the holes. Place the wall support with the holes at the wall plugs. Insert the supplied screws (S) into the holes. Tighten the screws with a screwdriver. Hook the appliance to the support (Fig. 12).

APPLIANCE CLEANING

Warning!

• All cleaning operations described below must be carried out with the appliance off and with the plug disconnected from the outlet. Never place the motor body, plug, or power cord in water or other liquids wipe clean using a damp cloth only. Do not use direct jets of water.
• Regular maintenance and cleaning preserve and maintain the appliance efficiently for a longer period.
• Never use the appliance without a filter or with a damaged fiter. The aspired dust could go inside the appliance and damage the motor.

Appliance body cleaning

Warning!

Clean the fixed parts of the appliance using a non-abrasive damp cloth to prevent damaging the body.

Cleaning the motorized brush

Do not lubricate or grease the rotating parts to avoid that hair and lint getting stuck.

The motorized brush (P) can be removed from its seat to clean the bristles. Remove the brush (P) from the tube. Press the brush release button (C). Turn the brush upside-down. On the blocking screw of the brush, there are two symbols (Fig. 11).

With a key or a coin, turn the blocking sCrew on the “open” position (). Lift the motorized brush on the blocking screw side. Remove the motorized brush completely. Clean the bristles from the dirt. To reassemble the rotating brush, insert first the side opposed to the blocking screw. Lower the motorized brush from the side of the blocking screw and insert the motorized brush support into its seat in the vertical direction (Fig. 12)

With a key or a coin, turn the locking screw on the “ closed ” position (Fig. 11)

Air outlet filter cleaning

• The air outlet filter (Fig. 14) is positioned under the cover (I) , on the motor body.
• To open turn the lid (I) counter-clockwise (Fig. 13). Remove the air outlet fiter (J).

Warning!

• Wash the air outlet filter only with clean water without soap or detergent.
• Insert the outlet filter in its seat. Close the lid on the motor body turning it clockwise.

Hepa filter and motor protection filter cleaning

The Hepa filter (K) is a high-efficiency filter that removes impurities and filters particles and bacteria. The Hepa filter is in the dust container. Take the motor body to a trash bin. Push the unlocking lever of the dust container lid. Remove all Remove motor protection filters from the dust container (Fig. 15).

Remove the Hepa filter from a container (Fig. 16). Wash the filters with water.

Warning!

Wash the Hepa filter only with clean water without soap or detergent. Often change the Hepa filter (every 4-6 months) to avoid the circulation of the bacteria in the air. Insert the Hepa filter within the dust container. The motor protection filter has joints that have to coincide with the seat on the dust container. Insert the motor protection fiter into the dust container with the large part facing the motor body.

SETTING THE MACHINE OUT OF SERVICE

In the case of decommissioning the appliance, it must be electrically disconnected. Empty the dust container. In the case of scrapping, you will be required to separate the various materials used in the construction of the appliance and dispose of them according to their composition and to the applicable laws in the country of use.

FAQ’s

Suppose my Ariete 2759 hoover cleaner breaks down and won’t restart then what I can do?

If your hoover was functioning normally before stopping unexpectedly, it may have overheated. The thermal protector safety switch found on the majority of vacuums stops the motor from running when it becomes too hot. You will need to wait anywhere between 30 minutes and 2 hours before attempting again, depending on your equipment.

What makes an Ariete hoover cleaner unusable?

Verify that the hoover cleaner is plugged into an active socket and that no fuses or breakers require resetting. A thermal cut-out that was caused because of a blockage is the second most likely cause of the problem. Look for obstacles in the hose and filters; remove them if you discover any.

How is an Ariete 2759 Handy Force Stick Vacuum Cleaner maintained?

Make sure the Ariete 2759 hoover is unplugged before cleaning it. Once a month, use a wet cloth and mild detergent to remove any dirt from the casing, hoses, and attachments. After each use, hoover the rug/floor attachment with the hose or crevice tool before putting the machine away.

How long is the lifespan of an Ariete 2759 hoover?

Consumer Reports estimates that the Ariete 2759 hoover cleaner has an average lifespan of eight years. However, the usage of the product is just as important as the brand.

Is it possible to fix an Ariete 2759 hoover?

The majority of Ariete 2759 hoover cleaner repairs, thankfully, can be carried out quickly and simply at home.

What happens if the hoover in the Ariete 2759 loses its suction?

If the suction power of your Ariete hoover cleaner has decreased, it’s time to empty the container. For hoover cleaners, several foam or mesh filters are available. They could eventually get clogged if they are not properly cleaned or replaced. As a result, your hoover will begin to lose suction.

What are some typical Ariete hoover cleaner problems?

Low suction power, excessive noise, burning odors, vacuums that won’t turn on, and overheating are the most typical problems with Ariete vacuums.

Does low pressure produce a hoover?

A vacuum can be created by using a vacuum pump to remove air from space or by using a quick fluid flow to reduce pressure, as in Bernoulli’s principle.

How often should a hoover cleaner made by Ariete be emptied?

Vacuum Experts suggest emptying the canister of your Ariete vacuum after each use rather than letting it completely fill up. According to a blog post on hoover experts, at the very least, “as a matter of habit, empty the hoover anytime it reaches half to two-thirds full.”

Can water damage an Ariete hoover?

Your Ariete vacuum cleaner can be completely unusable if water seeps inside the motor. Water will most likely be carrying dirt and filth in addition to your motor, making it doubtful that it will clean the motor thoroughly enough to make it safe.

Is it possible for an Ariete 2759 Handy Force Stick Vacuum Cleaner to overheat and malfunction?

The motor of the Ariete 2759 Handy Force Stick vacuums cleaner is almost indestructible, however, it is susceptible to failure if used in ways other than those for which it was designed. The primary factor behind hoover’s motor failure is overheating.

How long does the battery last on an Ariete 2759 Handy Force Stick Vacuum Cleaner?

All cordless vacuums need to be recharged because their batteries only last so long. A cordless vacuum’s normal battery life is between 15 to 40 minutes, which is more than enough time to clean your floors or furnishings. Expect to need anything between 2 and 16 hours to charge the device after the battery dies.

Do vacuums need maintenance?

A vacuum cleaner is a machine, and like any other object in your house, it needs to be properly maintained to continue working as well as it should.

How long does a hoover cleaner’s filter last when it’s an Ariete 2759 Handy Force Stick?

Generally speaking, most manufacturers suggest changing your filter every three to six months.

What happens if the Ariete 2759 Handy Force Stick hoover is stuffed to the brim?

It will be impossible for the filter bag or canister to continue collecting particles, it will jam, or the engine will overheat and stop running if it is too full. Hence, when you believe it to be around 75% full, empty it. Clear it out right away to prevent the breakdown; don’t wait until it is all filled.

Download this PDF Link:Ariete 2759 Handy Force Stick Vacuum Cleaner Instructions Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>