BOCCI 38.6V Stem Floor Ceiling Light Instruction Manual
- June 4, 2024
- BOCCI
Table of Contents
Instruction Manual
STEM – CEILING MOUNTED
38.6V PRODUCT SPECIFICATION
approx 17kg (38lb)
PENDANTS:
MOUNTING:
LAMPING:
STEM LENGTH
ADDITIONAL
EXTENDERS
MATERIALS:
WEIGHT:
POWER SUPPLIES:| six 142mm (5.6”) x 35mm (1.38”)
1.5w LED
1.8m (6’) long stem
153mm (6”) / 305mm (12”) / 914mm (36”) /
1524mm (60”)
blown glass, electrical components, unlacquered brass
or black powder coated brass stem, black or white canopy
approximately 17kg (38lb)
integral
---|---
DESCRIPTION
The stem ceiling-mounted system comes in unlacquered brass or black powder
coated stem with a 142mm (5.6”) diameter mounting plate rated for ceiling use.
38V is a variant of the original 38 series where a large glass sphere is blown
with a multitude of haphazard interior cavities, which intersect and collide
in unpredictable ways. 38V is smaller, lighter, and suspended with coaxial
cables. The interior cavities can be fi filled with plants or left empty..
Standard 38V is made with clear glass exterior spheres and milk-white interior
lamp holder cavities.
NOTES
- Purchase replacement lamps online at www.bocci.com/shop/bulbs
- The power supply can be remotely mounted with 94mm (3.7”) x 6mm (0.24”) canopy.
- The brass used in our Stem Series is untreated and, as such, will develop a natural patina over time. To avoid any marking or tarnish on the brass during handling and installation, please use the gloves provided in your shipment.
- To maintain your fi xture, please regularly dust with a lint-free cloth. If further cleaning is required, dampen a lint-free cloth with water only and wipe gently to remove dust or debris.
1 Thread the cover cap on one end of the stem.
Note: Bocci recommends wearing thin
gloves during installation to protect the
stem fi nish and the glass surface.| 2 Connect the stem pieces by threading the
stem connector to the stems.
Note: This step is only necessary for overall stem lengths longer than
1.8m (6’).| 3 Thread the pendant mounting plate onto the stem.
Carefully insert the provided lamp into the socket.
4 Connect the power supply to line voltage.
i. Connect input low voltage wire to 12V DC output wires by feeding the wires
through the slots on the
mounting plate.
ii. Connect the black wire to line wire and the white wire to the neutral
wire.
iii. Ensure that line voltage is not active during this part of the
installation!
Note: As an option, Bocci recommends mounting power supplies remotely in
a close, accessible and hidden location for ease of long-term maintenance.
Installation to be done by certifi ed personnel to ensure compliance with the
code.| 5 The client is responsible to ensure fasteners are attached to a
robust structural substrate. Affi x mounting plate to surface with fasteners
provided.
Thread canopy covers onto the mounting plate.
Thread on the stem to the canopy. Turn power to fi texture on.| 6 Gently thread
the pendant onto the stem. Be sure to carefully place the pendant so as not to
damage the lamp during installation.. Clean fi fingerprints from fi xture
surfaces.
For additional assistance, please contact Bocci:
Vancouver
sales@bocci.com
www.bocci.com
Berlin
europe@bocci.com
www.bocci.com
EU Patent # 002071019-001
Made in Vancouver, Canada
EU Patent # 002071019-001
Made in Vancouver, Canada
Vancouver
sales@bocci.com
www.bocci.com
Berlin
europe@bocci.com
www.bocci.com
© 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any
inquiries should be directed to:
info@bocci.com
Documents / Resources
|
BOCCI 38.6V Stem Floor Ceiling
Light
[pdf] Instruction Manual
38.6V, Stem Floor Ceiling Light, Floor Ceiling Light, Stem Floor Ceiling,
Floor Ceiling, 38.6V, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>