MICROCHIP PD-9601GCS/AC PoE Media Converter Installation Guide

PD-9601GCS/AC
PoE Media Converter User Installation Guide

Introduction

Microchip’s family of PD-9601GCS/AC is a Power over Ethernet (PoE) Media converter that injects power over data-carrying Ethernet cabling.
PD-9601GCS/AC complies with IEEE 802.3af standards, with guaranteed output power of 90W. These power levels allow usage by a new range of Ethernet-based applications such as PTZ IP cameras, Wi-Fi 802.3ac Access Points, Point-to- Point wireless radios, and more. The PD-9601GCS/AC Data and Power Output port is designed to carry gigabit Ethernet data and power over a standard CAT5e cable, delivered through 4-pair wires (Alt A: 3,6 (+) and 1,2 (-) ; Alt B: 4,5 (+) and 7,8 (-)). ® 802.3bt, IEEE ® 802.3at and IEEE ®
CAUTION: The PD-9601GCS/AC is designed for indoor applications only.

Features

PD-9601GCS/AC PoE Media converter offers the following important features:

• 1-port PoE output
• Guaranteed power of 90W
• Compact product size
• Universal AC input: 100 VAC to 240 VAC
• Standard compliance: IEEE 802.3 af/at/bt

Standards and Safety Guidelines

The following sections mention the standard and safety guidelines for the product.
1.1 Part Number Definition
PD-9601GCS/AC: 4-pairs AC input family.
Table 1-1. Part Number Definition

1.2 Electromagnetic Compatibility Approvals
Microchip’s PD-9601GCS/AC Media converter complies with the following standards:

• FCC Part 15: Class B
• EN55032: Class B
• Canadian ICES-003
• EN55024
• VCCI

1.3 Safety Standard Approvals
Microchip meets the following safety standards. Consult Microchip for the complete list of safety certifications.

• UL/cUL per UL62368-1
• GS Compliance per EN62368-1

1.4 GS Marking
GS marking on this product indicates that the product complies with the German Product Safety Act.
1.5 Safety Information
Read the safety information before using the PoE Media converter unit.
1.5.1 General Guidelines
Read the following safety information before carrying out any installation, removal, or maintenance procedure on the PoE Media converter unit. Warnings contain directions to be followed for the safety of personal and product.
1.5.2 Important Safety Information
Read the following important safety information before using the unit.
Setting up the AC power cord:

• The power cord must have regulatory agency approval for the specific country in which it is used (i.e., UL, CSA, VDE, and so on).

• The power cord must be a three-conductor type (two current carrying conductors; one ground conductor) terminated on one end by an IEC 60320 appliance coupler (for connection to the PoE Media converter), and on the other end by a plug containing a ground (earth) contact.

• The power cord must be rated for a minimum of 250Vac RMS operation, with a minimum rated current capacity of 5 amps (or a minimum wire gauge of 18 AWG (0.75mm).
  Note: The Data-In PoE injector and PoE ports are shielded RJ45 data sockets. They cannot be used as Plain Old Telephone Service (POTS) telephone sockets. Only RJ45 data connectors may be connected to these sockets. 2

• The AC wall socket-outlet must be near the PoE Media converter and easily accessible. You can remove AC power from the PoE Media converter by disconnecting the AC power cord from either the wall socket-outlet or the PoE media converter appliance coupler.

• The PoE Media converter Data-In and Data and Power Out interfaces are qualified as SELV (Safety Extra-Low Voltage) circuits according to IEC 60950-1. These interfaces can only be connected to SELV interfaces on other equipment.

1.5.3 Warnings

• Read the installation instructions before connecting the PoE Media converter to its power source.
• Follow basic electricity safety measures whenever connecting the PoE Media converter to its power source.
• A voltage mismatch can cause equipment damage and may pose a fire hazard. If the voltage indicated on the label is different from the power outlet voltage, do not connect the PoE Media converter to this power outlet.

PoE Media Converter Hardware Installation

The following sections describe the procedure to install the PD-9601GCS/AC PoE Media converter unit.
Figure 2-1. Installing the PD-9601GCS/AC

2.1 Media Converter Installation
Install the media converter according to following procedures.

1. Ensure that AC power is applied to the PoE Media Convertor, using an AC cable with an appropriate ground connection.
2. Connect the PoE Media Convertor to an AC outlet (100VAC–240VAC), using a standard power cord.

2.2 Installation of Optical to PoE Application
Install the optical fiber cable to the PoE Media converter according to following procedures.

1. Insert the SFP transceiver into the SFP cage (uplink port). The PD-9601GCS/AC supports multi and single mode transceiver.
2. Connect the optical fiber cable to the transceiver.
3. Connect the other end of the cable to the network transceiver.
4. Connect the PoE port to the Powered Device (PD) using a Cat5e (or higher) cable.

2.3 Installation of Copper to PoE Application

1. Connect the DATA IN port to the network using a Cat5e (or higher) cable.
2. Connect the PoE port to the PD using a Cat5e (or higher) cable.

2.4 Three Ports Converter Installation
Note: Read installation instructions before installing the PD-9601GCS/AC PoE Media converter.
The product supports simulated use of all 3 ports such as two data inputs and one PoE output which acts as a switch.

1. Insert the SFP transceiver into the SFP cage (uplink port). The PD-9601GCS/AC support both multi and single mode transceiver.
2. Connect the optical fiber cable to the transceiver.
3. Connect the other end of the cable to the network transceiver.
4. Connect the Copper DATA IN port to a non-PoE end-device using a Cat5e (or higher) cable.
5. Connect the PoE port to the PD using a Cat5e (or higher) cable.

2.5 Indicators
The following table lists the set of indicators displaying the status of the PoE Media converter and its ports.
Table 2-1. Port Indicator LED

Port Indicator LEDs

|

Indication

---|---
Main LED
OFF| Power OFF Indication
Green ON| Power ON Indication
Data LEDs
OFF| No Link
Green ON| Link
Green Blink| Data Transfer
PoE LED
OFF| No Output Power
Yellow ON| Power Over 2-pairs (3, 6 and 1, 2)
Green ON| Power Over all 4-pairs

Troubleshooting

The following sections describe the troubleshooting procedures to address any problems with the unit.
3.1 Preliminary Steps
Before mounting the PD-9601GCS/AC PoE Media converter to a fixed location:

• Read installation instructions before connecting the PD-9601GCS/AC to its power source.

• There is no ON/OFF switch on the Media converter, simply plug the PD-9601GCS/AC into an AC power source.

• Verify that a PoE Ready Ethernet-compatible device is connected.

• Do not cover PD-9601GCS/AC or block airflow to the unit with any foreign objects. Keep PD-9601GCS/AC away from excessive heat and humidity, and free from vibration and dust.

• Ensure that cable length from Ethernet network source to the terminal does not exceed 100 meters (330 feet).
  This Media converter is not a repeater and does not amplify Ethernet data signal.

• Use a splitter, if necessary, and ensure that the splitter is connected near the terminal and not on the PD-9601GCS/AC.

3.2 Troubleshooting Steps
The following table lists problem and resolution sequences to assist in troubleshooting minor operating problems. If the following steps do not solve your problem, contact the dealer for further assistance.
Table 3-1. Troubleshooting Steps

Problem|

Corrective Steps

---|---
Media converter does not power-up.| 1.Verify that an approved power cord is used.
2.Ensure that the power cord is properly connected.
3.Verify that the voltage at the power inlet is between 100 VAC to 240 VAC.
4.Remove and re-apply power to the device and check indicators during power- up sequence.
A port indicator is not lit and corresponding PD does not operate.| 1.The media converter did not detect a PD and therefore the port is not enabled.
2.Verify that the PD is designed for PoE operation according to IEEE 802.3 af/at/bt standard.
3.Verify that you are using a standard straight‑wired four-pair cable (Category 5e)
4.Ensure that the input Ethernet cable is connected to the DATA IN port.
5.Verify that the PD is connected to the Data and Power port (PoE).
6.Try reconnecting the same PD again with another media converter. If it works, there is likely a bad port or RJ45 connection.
7.Verify that there is no short over any of the twisted pair cables or over the RJ45 connectors.
8.If an external power splitter is in use, replace it with a viable splitter.
End device operates but there is no data link.

| 1.Verify that the port indicator on the front panel is continuously lit.
2.Verify that for this link you are using a standard UTP/FTP Category 5e straight (non-crossover) cabling, with all four pairs, and that the link is 100 meters long
3.Verify that the Ethernet cable length is less than 100 meters PoE Media converter to the load/remote terminal.
4.Try reconnecting the same PD into a different media converter. If it works, there is probably a faulty port or RJ45 connection.
5.If an external power splitter is in use, replace it with a viable splitter.
SFP transceiver no data connection.

| 1.Verify that the transceivers are inserted in the transceivers cage.
2.Verify that the similar type of transceivers are applied on both fiber optic cable ends (Multi or Single mode).
3.Verify that the fiber optic cable is compatible with the transceivers type.
4.Verify that the fiber optic cable doesn’t exceed the transceivers type maximum length.
5.Try reconnecting the fiber optic cable to the transceivers.

Specifications

The following sections provide detailed unit specifications of PD-9601GCS/AC.
4.1 Physical Specifications
Table 4-1. Dimensions

Table 4-2. Physical Specifications

4.2 Environmental Specifications
Table 4-3. Environmental Specifications

90% (non-condensing allowed)
Storage| –20 °C to 70 °C –4 °F to 158 °F| 95% (non-condensing allowed)

4.3 Electrical Specifications
Table 4-4. Electrical Specifications

4.4 Ethernet Interface
Table 4-5. Ethernet Interface

Mode and Multi-Mode transceivers.
Output ( Data and Power Out ): Ethernet 10/100/1000Base-T + 54VDC| RJ45 female socket, with DC voltage on wire 4-pairs: 1-2 and 3-6; 4-5 and 7-8.

Contacting Technical Support

If you encounter any problems while installing or using this product, consult Microchip technical support team through the website or contact on the following number:
USA/Canada
Telephone: +1 877 480 2323
Internet: www.microchip.com/support

Revision History

The Microchip Website
Microchip provides online support via our website at www.microchip.com/. This website is used to make files and information easily available to customers. Some of the content available includes:

• Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip design partner program member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives

Product Change Notification Service
Microchip’s product change notification service helps keep customers current on Microchip products. Subscribers will receive email notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest.
To register, go to www.microchip.com/pcn and follow the registration instructions.
Customer Support
Users of Microchip products can receive assistance through several channels:

• Distributor or Representative
• Local Sales Office
• Embedded Solutions Engineer (ESE)
• Technical Support

Customers should contact their distributor, representative or ESE for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in this document.
Technical support is available through the website at: www.microchip.com/support
Microchip Devices Code Protection Feature
Note the following details of the code protection feature on Microchip products:

• Microchip products meet the specifications contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is secure when used in the intended manner, within operating specifications, and under normal conditions.
• Microchip values and aggressively protects its intellectual property rights. Attempts to breach the code protection features of Microchip product is strictly prohibited and may violate the Digital Millennium Copyright Act.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of its code. Code protection does not mean that we are guaranteeing the product is “unbreakable”. Code protection is constantly evolving. Microchip is committed to continuously improving the code protection features of our products.

Legal Notice
This publication and the information herein may be used only with Microchip products, including to design, test, and integrate Microchip products with your application. Use of this information in any other manner violates these terms. Information regarding device applications is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. Contact your local Microchip sales office for additional support or, obtain additional support at www.microchip.com/en-us/support/design-help/client-support- services.
THIS INFORMATION IS PROVIDED BY MICROCHIP “AS IS”. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, OR WARRANTIES RELATED TO ITS CONDITION, QUALITY, OR PERFORMANCE.
IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL LOSS, DAMAGE, COST, OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE INFORMATION OR ITS USE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP’S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY RELATED TO THE INFORMATION OR ITS USE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THE INFORMATION.
Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated.
Trademarks
The Microchip name and logo, the Microchip logo, Adaptec, AnyRate, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus, maXTouch, MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB,OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, and XMEGA are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, IntelliMOS, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, WinPath, and ZL are registered trademarks of Microchip Technology Incorporated in the U.S.A.
Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, NVM Express, NVMe, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, RTAX, RTG4, SAMICE, Serial Quad I/O, simpleMAP,
SimpliPHY, SmartBuffer, SmartHLS, SMART-I.S., storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total Endurance, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. The Adaptec logo, Frequency on Demand, Silicon Storage Technology, Symmcom, and Trusted Time are registered trademarks of Microchip Technology Inc. in other countries. GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies.
© 2022, Microchip Technology Incorporated and its subsidiaries. All Rights Reserved.
ISBN: 978-1-5224-9930-5
Quality Management System
For information regarding Microchip’s Quality Management Systems, please visit www.microchip.com/quality.

Worldwide Sales and Service

AMERICAS
Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
www.microchip.com/support
Web Address:
www.microchip.com
Atlanta Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Dallas Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Tel: 317-536-2380
Los Angeles Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Tel: 951-273-7800
Raleigh, NC
Tel: 919-844-7510
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Tel: 408-436-4270
Canada – Toronto
Tel: 905-695-1980
Fax: 905-695-2078| ASIA/PACIFIC
Australia – Sydney
Tel: 61-2-9868-6733
China – Beijing
Tel: 86-10-8569-7000
China – Chengdu
Tel: 86-28-8665-5511
China – Chongqing
Tel: 86-23-8980-9588
China – Dongguan
Tel: 86-769-8702-9880
China – Guangzhou
Tel: 86-20-8755-8029
China – Hangzhou
Tel: 86-571-8792-8115
China – Hong Kong SAR
Tel: 852-2943-5100
China – Nanjing
Tel: 86-25-8473-2460
China – Qingdao
Tel: 86-532-8502-7355
China – Shanghai
Tel: 86-21-3326-8000
China – Shenyang
Tel: 86-24-2334-2829
China – Shenzhen
Tel: 86-755-8864-2200
China – Suzhou
Tel: 86-186-6233-1526
China – Wuhan
Tel: 86-27-5980-5300
China – Xian
Tel: 86-29-8833-7252
China – Xiamen
Tel: 86-592-2388138
China – Zhuhai
Tel: 86-756-3210040| ASIA/PACIFIC
India – Bangalore
Tel: 91-80-3090-4444
India – New Delhi
Tel: 91-11-4160-8631
India – Pune
Tel: 91-20-4121-0141
Japan – Osaka
Tel: 81-6-6152-7160
Japan – Tokyo
Tel: 81-3-6880- 3770
Korea – Daegu
Tel: 82-53-744-4301
Korea – Seoul
Tel: 82-2-554-7200
Malaysia – Kuala Lumpur
Tel: 60-3-7651-7906
Malaysia – Penang
Tel: 60-4-227-8870
Philippines – Manila
Tel: 63-2-634-9065
Singapore
Tel: 65-6334-8870
Taiwan – Hsin Chu
Tel: 886-3-577-8366
Taiwan – Kaohsiung
Tel: 886-7-213-7830
Taiwan – Taipei
Tel: 886-2-2508-8600
Thailand – Bangkok
Tel: 66-2-694-1351
Vietnam – Ho Chi Minh
Tel: 84-28-5448-2100| EUROPE
Austria – Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark – Copenhagen
Tel: 45-4485-5910
Fax: 45-4485-2829
Finland – Espoo
Tel: 358-9-4520-820
France – Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany – Garching
Tel: 49-8931-9700
Germany – Haan
Tel: 49-2129-3766400
Germany – Heilbronn
Tel: 49-7131-72400
Germany – Karlsruhe
Tel: 49-721-625370
Germany – Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Germany – Rosenheim
Tel: 49-8031-354-560
Israel – Ra’anana
Tel: 972-9-744-7705
Italy – Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy – Padova
Tel: 39-049-7625286
Netherlands – Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Norway – Trondheim
Tel: 47-72884388
Poland – Warsaw
Tel: 48-22-3325737
Romania – Bucharest
Tel: 40-21-407-87-50
Spain – Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden – Gothenberg
Tel: 46-31-704-60-40
Sweden – Stockholm
Tel: 46-8-5090-4654
UK – Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
---|---|---|---

© 2022 Microchip Technology Inc. and its subsidiaries

References

• Empowering Innovation | Microchip Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>