BOCCI 84.3 Random Hanging 3 Blown Glass LED Lamp Instruction Manual
- June 4, 2024
- BOCCI
Table of Contents
STEM – CEILING MOUNTED
84.3
Instruction Manual
PRODUCT SPECIFICATION
PENDANTS: | three |
---|---|
MOUNTING | 142mm (5.6”) x 35mm (1.38”) |
LAMPING: | 1.5w LED |
STEM LENGTH | 0.9m (3’) or 1.8m (6’) long stem |
ADDITIONAL EXTENDERS | 153mm (6”) / 305mm (12”) / 914mm (36”) /1524mm (60”) |
MATERIALS: | blown glass, electrical components, unlacquered brass or black |
powder coated brass stem, black or white canopy
WEIGHT:| approximately 7 .4kg (16.4lb) / 8.4kg (18.4lb)
POWER SUPPLIES:| integral
DESCRIPTION
The stem ceiling-mounted system comes in unlacquered brass or black powder-
coated stem with a 142mm (5.6”) diameter mounting plate rated for ceiling use.
A white glass bubble is captured inside a fine copper mesh basket and then
plunged into hot clear glass. Air is blown into the matrix to gently push the
white glass through the mesh, creating a delicate pillowed form that is
suspended inside the thick outer layer of clear glass. Sometimes the copper
mesh basket folds and crinkles, adding specifi city to each piece.
NOTES
+ Purchase replacement lamps online at
www.bocci.com/shop/bulbs
+ Power supply can be remotely mounted with a 94mm (3.7”) x 6mm (0.24”)
canopy.
+ The brass used in our Stem Series is untreated and, as such, will develop a
natural patina over time. To avoid any marking or tarnish on the brass during
handling and installation, please use the gloves provided in your shipment.
+ To maintain your fixture, please regularly dust with a lint-free cloth. If
further cleaning is required, dampen a lint-free cloth with water only and
wipe gently to remove dust or debris.
US Patent Pending
EU Patent # 003611144-0001 to 0004
PRODUCT INSTALLATION INSTRUCTIONS
-
Thread the cover cap on one end of the stem.
Note: Bocci recommends wearing thin gloves during installation to protect the stem finish and the glass surface. -
Connect the stem pieces by threading the stem connector to the stems.
Note: This step is only necessary for overall stem lengths longer than 1.8m (6’). -
Thread the pendant mounting plate onto the stem.
Carefully insert the provided lamp into the socket. -
Connect the power supply to line voltage.
i. Connect input low voltage wire to 12V DC output wires by feeding the wires through the slots on the mounting plate.
ii. Connect the black wire to the line wire and the white wire to the neutral wire.
iii. Ensure that line voltage is not active during this part of the installation!
Note: As an option, Bocci recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long-term maintenance.
Installation is to be done by certifi ed personnel to ensure compliance with the code. -
The client is responsible to ensure fasteners are attached to a robust structural substrate.
Affi x mounting plate to surface with fasteners provided.
Thread canopy covers onto the mounting plate.
Thread on the stem to the canopy.
Turn power to fitexture on. -
Gently thread the pendant onto the stem.
Be sure to carefully place the pendant so as not to damage the lamp during installation.
Clean fingerprints from fixture surfaces.
For additional assistance, please contact Bocci:
Vancouver
sales@bocci.com
www.bocci.com
Berlin
europe@bocci.com
www.bocci.com
US Patent Pending
EU Patent # 003611144-0001 to 0004
Made in Vancouver, Canada
© 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries
should be directed to: info@bocci.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>