RISING SEED-060A-06 4G or GPS Antenna Device User Manual
- October 29, 2023
- RISING
Table of Contents
- RISING SEED-060A-06 4G or GPS Antenna Device User Manual
- RECORD OF CHANGES
- 1. Functions and characteristics
- 2.Product appearance, structure, function introduction
- 2 Product Program download and update
- (1) Software development platform
- (2) Program bumin
- 3.1 HM Application buming
- 3.2 Core and device tree burning
- (4 )Connection to external controller
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RISING SEED-060A-06 4G or GPS Antenna Device User Manual
RECORD OF CHANGES
| Version | Change Information | Reason | Data | Owner |
|---|---|---|---|---|
| 1.00 | New | – | 2021-10 | Manman Ma |
1. Functions and characteristics
- BLE，GPS，4G，and an exposed antenna
- MK Voice input，Audio output
- 5 sets of cameras
- Separate the display and the host device，display data transfer through FPD-Link III
- 2 couples of analogic input，1 couple of digital input
- Support 2 *CAN，and ISO11898 0B、J1939
- Connector Type：TE 2315885-1，recommended matching connector type：TE 0-2209544-9。
- Function overview
| No. | Function | No. | Function | Describe |
|---|---|---|---|---|
| 1 | Communication | 1.1 | CAN communication | Support ISO11898 |
CAN2.0B、J1939、CanOpen
1.2| 4G communication| Upload data to remote control center;
Download data fromsurveillance center; Support 4G LTE high-speed transmission
1.3| GPS communication| Get the latitude and longitude of satellite and other
information
1.4| USB communication| Support update through USB
1.5| Bluetooth communication| Support connect to smart phone via Blutooth. The
user can make calls or listen to music via
Bluetooth.
2| HMI| 3.1| FM| Integrated FM function.
3.2| play music| Support listen to music via Bluetooth.
3.3| Speech recognition| Support speech recognition and microphone noise
reduction.
4| Input & output| 4.1| Audio analog signal output.| Audio left and right
channel output.
5| MIC| 5.1| MIC input| Support MIC input and Bluetooth.
2.Product appearance, structure, function introduction
(1) Appearance
2 Size parameters
3. Port capabilities definitions
| Item | Function | Pin No. | Note |
|---|
Analogic input
| ****
Voltage input
| ****
AI_V1
| ****
J2-21
| Range：0~10V Acquisition accuracy：0.5% Resolution：
0.025%
AI_V2
| ****
J2-22
Digital input
| ****
Voltage input
| ****
DI_L
| ****
J2-37
| Door signal
acquiition
Camera
| ****
Camera signal
| CAMRA3| J2-14| ****
CAMRA4| J2-29
CAMRA2| J2-30
CAMRA5| J2-27
CAMRA6| J2-26
Power
| ****
+12V
| ****
J2-49
| Voltage：12V
Current：1.2A
GND| J2-50| GND
MIC
| ****
MIC signal
| MIC_Signal_1_J| J2-10|
MIC_Signal_2_J| J2-12
GND
| MIC_GND_J1| J2-11| ****
GND
MIC_GND_J2| J2-13
Communication
| | USB3_5V| J2-3| Voltage： 5V,Current：1A
max
USB HOST
| USB3_GND| J2-2
USB3_DP| J2-5
| USB3_DM| J2-4
CAN1
| CANA_L| J2-51| Without 120Ω resistor on host device；
CANA_H| J2-52
CAN2
| CANB_L| J2-53
CANB_H| J2-54
Power
| ****
GND
| GND| J2-47| ****
GND
GND| J2-45
GND| J2-36
GND| J2-25
GND| J2-24
GND| J2-20
GND| J2-19
GND| J2-17
Power
| ****
VIN
| J2-1| Voltage：24V，
Range：16V-32V
J2-16
| | | ****
VDD_24V
| ****
J2-31
| The power supply
of display board
---|---|---|---|---|---
ACC| J2-18| SMI signal
AI_5V
| ****
J2-46
| ****
5V power output
Audio output
| ****
Right channel output
| Right channel
signal +
| ****
J2-8
| ****
Right channel
signal-
| ****
J2-9
Left channel output
| Left channel
signal+
| ****
J2-6
| ****
Left channel
signal-
| ****
J2-7
Reset| Software reset| LM_RESET| J2-48| LowPower Reset
2 Product Program download and update
(1)Hardware development platform
When the user need to download or update the program , please open the metal
cap on the left of the device. Then connect the device to your computer via
USB cable and download or update the program through the upper computer.
Debugging Program can also through this USB connector.
When purchase our products, we command the matching connector to customers as
follow：
| No. | Item | Type | Diagram | Manufacturer |
|---|
1
|
TE 60 Pin
Connector
|
0-2209544-9
TE
|
2
|
HSD
connector
|
D4K14A-1D5A5-C
Rosenberg
|
---|---|---|---|---|---|---
3
|
4G/GPS ANT
|
2298721-3
TE
(1) Software development platform
Support HM configuration Software, adopt standard IDE development environment, the programmer can develop HM application software base on requirements of the project.
Programmers can refer to common examples , then quickly develop applications.Include： 1） HM human-machine inter，include normal Human-machine operation controls
2） Based on HM communication function library, include CAN communication，4G communication，GPS communication.
(2) Program bumin
3.1 HM Application buming
- Creat an APP folder at the root of USB disk, place HM
- Connect the USB disk to the USB connector, power on the host device，then screen pop-up options, click”burn”, LED on USB disk lighting and the screen shows burn
- When the updates have finished, you don’t need to restart the device, the display restarts
3.2 Core and device tree burning
1）Connect the computer and the USB connector on the host device via USB cable 2）Turn off the Windows system firewall
- If in“Device Manager->Network adapter”，you can’t find rndis network device,please setup the rndis
- Set the IP（Display IP）and Servers IP（computer IP）must on the same network
- Set the computer IP：168.1.66
- Set the display IP：168.1.62,It is not modifiable by default.
- Display restarts and enter Uboot mode, enter commands in the serial console： setenv serverip 168.1.66 setenv ipaddr 192.168.1.62 saveenv
- Creat a folder on the desk, put exe 、 core and device trees at the root of this folder.
- Run exe，”sever interface”choose local IP：192.168.1.66
- update device trees,enter commands in the serial console：run update_fdt
- Update core, enter commands in the serial console：run update_kernel
- Connection to external controller
(4 )Connection to external controller
