Shenzhen Rising Sun Technology X5 Fashion Smart Phone Watch User Manual
- June 4, 2024
- Shenzhen Rising Sun Technology
Table of Contents
Fashion Smart Phone Watch
User Manual
Please Read the User Manual Carefully Before Use
Introduction
This product is a 1.32-inch high-definition fashion smartwatch, with Bluetooth call, exercise detection, heart rate detection, temperature detection, information reminder, daily life assistant, and other intelligent functions, the appearance of both sports and fashion style, business leisure, comfortable to wear, suitable for people of different ages to wear.
Packing list
Smart Watch 1, Charging Cable 1, User Manual *1
Product Overview
Operation Introduction
When using the watch for the first time, ensure that the watch has sufficient
power. If the watch cannot be powered on due to low power, please charge it
for about 2 hours. After charging, the watch will automatically start. After
the watch is turned on, select the corresponding language and scan the code to
download the APP named FitCloudPro. Then open the APP scan code for binding,
and connect the audio Bluetooth X5_Call-XXX,
4.1 Touch function
4.1.1 Home Page Operations
4.1.1.1 Right-swipe on the home screen to access the shortcut menu
4.1.1.2 Right-swipe on the home screen to access Step counting, Heart rate, Bluetooth dialing, sleep,
4.1.1.3 Down-swipe on the home screen to access control center
4.1.1.4 Up-swipe on the home screen to access Messages
4.1.2 Other Page Operations
4.1.2.1 Right swipe to return to the upper-level menu
4.1.2.2 Slide up and down: Drag the menu to slide up and down
4.1.3 Hold down the screen on the home screen of the watch, and when the dial
becomes smaller, slide
left or right to replace it.
4.2 Key Functions
4.2.1 Up key
4.2.1.1 Rotary slide of encoder
4.2.1.2 Press the button to wake up the screen
4.2.1.3 One-key return
4.2.1.4 Long press to power off and on
4.2.2 Down key
4.2.2.1 Press the button to wake up the screen
4.2.2.2 One-key return
4.2.2.3 Long press to power off and on
4.3 Charging
4.3.1 Charge normally by aligning the thimble of the magnetic charging line
with the charging contact point of the watch.
4.3.2 When the watch is charging, the battery rolling display, when the
battery is fully charged, the battery symbol on the screen shows full grid,
the charging time is about 2 hours, and the watch will automatically start
when charging.
4.4 Health data
4.4.1 Exercise mode: When the watch is turned on, slide the screen and select
“Exercise” to enter a variety of exercise modes, including walking, running,
mountaineering, cycling, basketball and other 20 exercise modes. To end the
movement, swipe right and choose Exit.
4.4.2 Heart rate detection: Slide the screen, select “Heart rate”, and click to enter the heart rate detection mode. In the heart rate detection mode, the watch is worn on the left wrist and closely fits the skin. The light on the back of the watch blinks, and the heart rate detection is started until the watch vibrates (the heart rate detection is finished) to display the heart rate value.
4.4.3. Data synchronization: The step/sleep/heart rate data on the watch
terminal will be automatically synchronized to the mobile terminal in real
time after the APP is successfully connected with Bluetooth.
4.5 APP “FitCloudPro” Download
4.5.1 Android: Search FitCloudPro on App Store or Google Play to download
it.
10S: Search FitCloudPro in App Store for download.
4.5.2 Download via QR code scanning
http://fitcloud.hetangsmart.com/qrcode/cn/
4.6 Login to
Open FitCloudPro, register your account, and enter relevant information to log
in. The diagram below:
4.7 Bluetooth connection 4.7.1 After the watch is powered on, select the
language to enter the page for binding the QR code. First in the mobile phone
“Settings” inside, turn on the mobile phone “Bluetooth”. Then enter the
“FitCloudPro” APP page, click the “My” option, click “Add Device”, and then
click the scan in the upper right corner to bind successfully. Alternatively,
click Search without scanning codes, select the device name to connect to the
watch, and click Connect until “Connect succeeded” is displayed. 
4.7.2 Connect and pair audio Bluetooth X5_call-XXX in your phone’s Settings.
If you do not connect, you will not be able to use Bluetooth calling. If you
do not want to use the Bluetooth call function of the watch after connecting
to the audio Bluetooth, you can directly turn off the audio Bluetooth in the
control center of the watch.
4.7.3 After the Bluetooth connection is successful, the time of the watch is
synchronized with the time and information of the mobile phone.
4.7.4 Bluetooth automatic reconnection:
4.7.4.1 There is no reminder on the watch side when the watch is beyond the
Bluetooth connection range. When the watch reaches the Bluetooth connection
range, the APP Bluetooth will be automatically reconnected.
4.7.4.2 After closing the app or restarting the phone or clicking the one
button of the phone to clean it, enter “FitCloudPro” again, and Bluetooth will
automatically reconnect within the effective range of Bluetooth connection
4.8 Other features:
The following functions and Settings can only be realized on the premise of
successful APP login and Bluetooth connection, especially setting message
reminder.
Attention
5.1 At the first use, please connect the charger to activate the watch;
5.2 Bluetooth Connection:
5.2.1 Please ensure that the Bluetooth of the mobile phone is turned on and
the watch is turned on.
5.2.2 When searching for Bluetooth, ensure that the watch has not been bound
to another account.
5.2.3 When searching Bluetooth, the watch and mobile phone should be as close
as possible.
5.3 If the watch terminal does not receive the push message, please confirm
that “FitCloudPro” is running in the background and the message notification
is enabled (auxiliary functions also need to be enabled).
5.4 If exercise, sleep and heart rate data are not synchronized to APK, please
disconnect Bluetooth and reconnect.
5.5 Unbind the watch from the current account before binding it to another
account.
5.6 If the screen of the watch does not light up, connect the watch to the
charger.
5.7 During measurement, the bottom of the watch should be close to the skin to
avoid movement;
5.8 Do not charge in the case of water stains, must use the supporting
charging cable for charging, charging takes about 2 hours;
5.9 No soaking, diving, diving or bathing is allowed.
5.10 This product is an electronic monitoring product and is not used for
medical reference. The data is for reference only.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be u sed in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>