Shenzhen Xiangmingrui Technology Co Ltd M1 Bluetooth Microphone User Manual
- June 10, 2024
- Shenzhen Xiangmingrui Technology Co Ltd
Table of Contents
Shenzhen Xiangmingrui Technology Co Ltd M1 Bluetooth Microphone
Product Information
Specifications :
- Charging Type: Type-C
- Battery Capacity: 1500mAh
- Charging Time: Not specified
- Battery Life: Not specified
- Microphone Core Type: Not specified
- Microphone Chip: Not specified
- Typical Transmission Power: Not specified
- Delay: Not specified
- Impedance: Not specified
- Sensitivity: Not specified
- Frequency Response: Not specified
- Operating Frequency: Not specified
- Effective Range: 10M
Product Usage Instructions
- Mic Instruction:
Once the speaker and microphone are powered on, the microphone will connect with the speaker automatically. You can then enjoy the karaoke function. To disconnect the microphone from the speaker, power off the microphone.
Precautions :
FCC Statement: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure without restriction.
FAQ
-
Q: How do I charge the Bluetooth Microphone?
A: Use the provided Type-C charging cable to connect the microphone to a power source for charging. -
Q: Can I adjust the microphone sensitivity?
A: The sensitivity of the microphone cannot be adjusted manually as it is set internally by the design. -
Q: What is the effective range of the Bluetooth connection?
A: The effective range of the Bluetooth connection is 10 meters.
User Manual
Bluetooth Microphone
- LED Display
- Power on/off
- 1500mAh Battery Capacity
- Type-C
Parameters
| Charging Type： | Type-C 5V/1A |
|---|---|
| Battery Capacity： | 3.7V 1500mA |
| Charging Time： | 3H |
| Battery Life： | 10H |
| Microphone Core Type： | Dynamic Microphone Core |
| Microphone Chip： | AD6976D-M |
| Typical Transmission Power： | 8dBm |
| Delay： | 20-30MS |
| Impedance： | 600（±15%）Ω（at 1KHz） |
| Sensitivity： | -53.7DB(+-3DB) |
| Frequency Response： | 70Hz-13KHz |
| Operating Frequency： | A Frequency: 2400MHz B Frequency: 2400MHz |
| Effective Range： | 10M |
Mic Instruction
- Once the speaker and microphone powered on, the microphone will connect with speaker automatically.
- Then you can enjoy the karaoke function.
- Or power off the microphone to disconnect with speaker
Precautions:
The microphone is constructed with metal and features a durable UHF dynamic
core. It has a sleek and attractive design and possesses strong anti-feedback
and anti-interference capabilities. This microphone effectively reduces
ambient noise, has a heart-shaped directional pattern, sensitive sound pickup,
and delivers pure and sweet audio quality. It produces clear and melodious
vocal performances, allowing you to sing with a rich and enjoyable sound.
Additionally, it connects instantly without the need for pairing or a power-on
process.
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>