Baseus PPCXM1030 Wireless Fast Charge Power Bank 10000mAh 30W User Manual

Baseus PPCXM1030 Wireless Fast Charge Power Bank 10000mAh 30W

Overview

Before using the product, thoroughly read this manual. Keep the manual for future reference.

Warnings

Improper use of the product may lead to battery malfunction or severe overheating, and may even cause fire or explosion. To avoid any damage to you and your property, please follow the instructions below when you use and store the product.

1. This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur.
2. Please charge this product with a charger approved by the local safety standards in case of danger or damage.
3. DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
4. If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
5. Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.
6. This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140℉(60℃).
7. DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
8. This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.

Attention

1. Please fully charge this device before using it for the first time.
2. The power banks have conversion efficiency, so the battery capacity of power bank is not equal to the rechargeable capacity.
3. Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
4. Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
5. Please remove the cable when done recharging this product or finished charging for any other device to preserve the product integrity.
6. If the indication does not light up after pressing the power button, please recharge this product.
7. Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long-term storage.
8. Please DO NOT dismantle the product by yourself. Improper use or placement may compromise the service life or damage the product, to which our company will not bear any legal responsibilities nor offer any guarantee. Please understand.
9. There mustn’t be any metal objects or materials (like iron plates, rings, metal phone case, etc) between the back of the charging phone and the charging area during wireless charging.
10. During wireless charging, if disconnection or serious overheating occurs, it may be that the receiving coil of the charging phone is not completely aligned with the wireless charging coil, or if there is metal object in the phone case. Please try to cool down the phone first, remove the protecting case, and then align it to the correct position.

Specifications

• Brand: Baseus
• Name: Power Bank
• Model No.: PPCXM1030
• Battery: Polymer lithium battery
• Power Capacity: 10000mAh / 38.5Wh
• Rated Capacity: 5800mAh (5V/3A)
• Energy Conversion Rate: ≥75%
• Type-C Input: 5V/3A; 9V/2A; 12V/1.5A
• Type-C Output: 5V/3A; 9V/3A; 12V/2.5A; 15V/2A
• Wireless Output: 5W/7.5W/10W/15W
• Total Output: 5V/3A
• Product Size: 104.6×68.9×20mm
• Product Weight: About 210g

Content

• Power bank *1
• User manual * 1
• Warranty card *1
• Charging cable *1

Product Schematic Design

• Wireless charging indicator
• Battery level display
• Wireless charging area
• Designed by Baseus \ Made in China

Product Description

This product is a portable charging device that can provide wired and wireless charging for mobile phones, tablets, game consoles and other digital products. The product supports both wired and wireless charging, 30W PD output, Type-C dual-way fast charging, 15W wireless fast charging and more. It has built-in FOD, overcharge, over-discharge, temperature protection and other safety protection circuits.

Use Environment

• Working Temperature: Non-tropical areas, 0℃ to 35 ℃
• Storage ambient temperature: 0 ℃ to 40 ℃

Icon Description

The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.

Operation Instructions

When charging wirelessly: This product has an auto-wake function for wireless charging, just place your phone onto it, and it will automatically start charging. But for some phones, due to compatibility issues, the wireless charging function needs to be activated by pressing the button. Press it once, the battery indicator will light up and the wireless charging is turned on, and you can place your device on. If there’s no load connected for the wireless charging in 30s, the product will automatically shut off the wireless charging function.

Wireless Charging Tips

Place your phone onto the wireless charging area (as it shows in the picture) for wireless charging. The distance between the charging phone and the power bank must be within 8mm for wireless charging to work, if not it will stop charging, and you need to adjust the phone’ s position.

Statement on Toxic and Hazardous Substances in Electronic Information Products:

• This form is compiled in accordance with SJ/T 11364.
• O: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
• X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
• The product complies with EU ROHS 2.0 directive (2011 / 65 / EU)

Implementation criteria： GB/T 35590-2017

Federal Communications Commission

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. (1) This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Contact information

• Brand: Baseus
• Manufacturer: Shenzhen Baseus Technology Co., Ltd.
• Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
• TEL: +86 755-82433603
• Hotline: 4000-712-711

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>