Hongkong Choice Electronics A65 Wireless Bluetooth Earphones Instruction Manual
- June 6, 2024
- Hongkong Choice Electronics
Table of Contents
Wireless Bluetooth Earphones
A65 (BTSX2)
Instruction Manual
Specification
| Wireless Version: | 5.0 |
|---|---|
| Support Protocols: | A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 |
| Bluetooth Frequency: | 2.4G |
| Working Distance: | 10m |
| Playing/Talking time: | 3‐5hours |
| Charging box capacity: | 350mA |
Operation:
Auto Power On, Auto Pair
When taking out the earbuds from the charging case, The earbuds will be Power
On Automatically, after a few seconds, the 2 earbuds will be paid
automatically. And then you search the Bluetooth devices by your phones, will
detect the earbuds’ name: BTSX2. Click it to connect to your phones.
Main Function:
-
Phone calls
Answer/Hang up Call: Double touch the earbuds. Decline Call: Touchand holds 2 seconds the earbuds. -
Listening to Music
Double touch the earbuds: to pause the music and reply by touch again. Triple touch left earbud: Preview track Triple touch right earbud: Next track -
Voice Enable
Touch and hold for 2 seconds to enable voice function on your phone. -
Power Off Long touch the earbuds for 5 seconds, then the earbuds will be powered off. It would be powered off automatically when the earbuds are away from your Bluetooth device for over 5 minutes, So do not worry the power is exhausted. In the Power off-model, touch the earbuds for around 2 seconds, it will be Power On.
-
Charging:
A. Earbuds charging: Put the earbuds into the charging case, the earbuds will be turned off automatically, and begin to charge, The Led in solid red in earbuds when charge full the light turns off. B. Charging Case charging: Connect the charging case via USB cable to a USB charger or device with a USB port. During charging, the led light flashes Red, then turns solid when fully charged.
Precautions
- The earbuds should be stored in a dry and ventilated environment, to avoid oil, water, moisture, and dust affecting product performance.
- Avoid using stimulus, organic solvents or items containing these ingredients to clean the earbuds.
- The use of earbuds should be corrected as per the specification, pay attention to use the influence of the environment on the earbuds. In order to ensure a smooth connection, it’s recommended that the distance between the earbuds and phones is within 10 meters.
- If the earbuds failed to connect or with poor connection, please do not take apart the earbuds or the accessories on your own, Otherwise, no warranty.
- Regarding charging earbuds. Please use the standard USB cable or pointed charging cable from our company to charge the earbuds.
- In order to ensure normal use, please ensure sufficient power of the earbuds.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>