EDIFIER W320TN True Wireless Noise Cancellation Earbuds Headphones User Manual

EDIFIER W320TN True Wireless Noise Cancellation Earbuds Headphones

Power ON/OFF

1. Power ON when the case is opened.
2. Power OFF when placed in  the case and the case is closed.

Note: If there is no Bluetooth connection for 10 minutes after power on, the earbuds will turn off automatically.

Pairing

1. Earbuds placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. White and orange LEDs will blink alternately.
3. Select “EDIFIER W320TN” in your device setting to connect. White LED will blink once and then turn off when successfully.

1st Pairing

1. Earbuds placed in the case and keep the case open. White and orange LEDs will blink alternately.
2. Select “EDIFIER W320TN” in your device setting to connect. White LED will blink once and then turn off when successfully.

Note: For subsequent use, the earbuds will automatically connect to the device used last time.

Reset

1. Earbuds placed in the case and keep the case open.
2. Press the button on the case 3 times to re-enter left & right connection and clear pairing records, white LED will blink slowly.
3. Select “EDIFIER W320TN” in your device setting to connect. White and orange LEDs will blink alternately, then white LED will blink once and turn off when successfully.

Dual-device connection

1. Pair device A with the earbuds. Upon success, keep the earbuds in the case and keep the case open, then press and hold the button on the case for about 3s to re-enter the pairing mode，and device A is disconnected from earbuds.
2. Select “EDIFIER W320TN” in device B to connect successfully.
3. Select “EDIFIER W320TN” in device A to connect manually. White LED will blink once and then turn off when 2 devices connected successfully.

Charging

Charging case

1. Please connect the case to power source with the included Type-C charging cable for charging.
2.  Orange LED is steady lit when charging and off when fully charged.

Note: Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.
Input: 5V 200mA(Earbuds)

Controls

Note:

1. Easily pinch the debossed area of earbuds stem to select functions.
2. Images are for illustrative purposes only and may differ from the actual product.
3. Download Edifier Connect App for more customizable control settings.

Connection

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

• IC statement:CAN ICES-003(B) / NMB-003(B).
• FCC ID: Z9G-EDF201
• IC:10004A-EDF201

Declaration for EU

• Frequency Band: 2400Mhz – 2483.5Mhz
• RF Power Output: ≤13 dBm (EIRP)
• There is no restriction of use.
• Model: EDF200117

Edifier International Limited

P.O. Box 6264 General Post Office

Hong Kong
www.edifier.com
2023 Edifier International Limited. All rights reserved. Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

References

• Headphones, Speakers | A Passion for Sound -【Edifier】

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>