STIGA HT 500 Li 48 Battery Powered Hedge Trimmer Instruction Manual
- June 4, 2024
- STIGA
Table of Contents
171506280/4 11/2020
HT 500 Li 48 HT 700 Li 48
Battery-powered hedge trimmer
OPERATOR’S MANUAL
Translation of the original instruction
|
---|---
|
TECHNICAL DATA
- MAX supply voltage
- NOMINAL supply voltage
- Blade speed
- Blade lenght
- Cutting lenght
- Cutting capacity
- Weight without battery pack
- Cutting means code
- Measured sound pressure level (according to EN 60745-2-15)
- Uncertainty of measure
- Measuered sound power level (according to EN 60745-2-15)
- Guaranteed sound power level (according to 2000/14/EC)
- Vibration level (according to 60745-2-15)
- Accessories available on request
- Battery pack
- Battery charger
- Battery backpack
- Battery simulator
(*) This battery can only be used with the battery backpack. Inserting the
battery in the machine housing is prohibited.
a) NOTE: the declared total vibration value was measured using a
normalized test method and can be used to conduct comparisons between one tool
and another. The total vibration value can also be used for a preliminary
exposure evaluation.
b) WARNING: the vibrations emitted during actual use of the tool can
differ from the declared total value according to how the tool is used. Whilst
working, therefore, it is necessary to adopt the following safety measures
designed to protect the operator: wear protective gloves whilst working, use
the machine for limited periods at a time and decrease the time during which
the throttle control lever is pressed.
The content and images in this User Manual were produced expressly for ST. S.p.A. and are protected by copyright – any unauthorized reproduction or modification to the document, either partially or in full, is prohibited.
ST. S.p.A.
Via del Lavoro, 6
31033 Castelfranco Veneto (TV) ITALY