Zintronic Adding Camera To The Network Using Mobile Phone Instruction Manual

June 9, 2024
Zintronic

Zintronic Adding Camera To The Network Using Mobile Phone

Zintronic-Adding-Camera-To-The-Network-Using-Mobile-Phone-
product

Camera proper connection and configuration via mobile phone

Connecting the camera to the power supply
  • Connect the camera using a cable power supply 12V from the box, as shown in the picture below
Connecting via WiFi hotspot to the camera network
  • A and P camera series are generating their own WiFi network, to add camera we have to go to mobile phone Settings and then check available WiFi networks
  • Choose camera network IPCAM-xxxxxx-xxxxx (where x digits and letters are assigned to camera UID)
  • Connect with the camera WiFi hotspot according to the example as shown in the pictures below
  • Choose a camera WiFi network
  • Fill in the password (01234567)
  • After connecting choose “Connect anyway?” as “Connect”
  • When we do this properly we will see the information „Connected without internet”Zintronic-Adding-Camera-To-The-Network-Using-Mobile-Phone-fig- \(2\) Zintronic-Adding-Camera-To-The-Network-Using-Mobile-Phone-fig- \(4\)

Adding a camera to the CamHiPro application after connecting with a WiFi

hotspot

Adding a camera to the CamHiPro application
  • Turn on the CamHiPro application
  • We click the „+” button in the top right corner or “Click Add device” in the middle of the screen (when we have not added any other camera yet).
  • We choose the option „IP Camera”
  • In the next step, the application will automatically forward us to add a camera to the network when it will be detected
  • It will be shown in the pictures below
  • Choose the option „Yes, I want to add this device”
  • It will show the UID number of the camera, login, and password as default: admin, admin (we don’t change anything)
  • In the next step click „Add to”
  • After adding the camera configure the WiFi network
  • Look for the name of our WiFi local network on the list and select the proper one
  • Then fill in the password to our WiFi local network
  • In the next step accept by clicking „Configure wireless and add”
  • Give a name to our camera or choose one of the shown suggestions, then click “Confirm”
  • The camera will connect to our WiFi local network and it will stop emulating its own WiFi hotspot
  • After that, the CamHiPro application will force a password change when we will click on the screen
  • Click „OK”
  • The old password is admin
  • Create your own new password (it has to contain at least 8 characters: at least 1 uppercase letter, lowercase letter, and a digit!!!)
  • Repeat the new password
  • Then click „Apply”.
  • After that our camera will be online when we come back to the main menu and a view from the camera will be available after clicking on the screen
  • Configuration completed!

Contact Information

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals