Zintronic SD Card Recording Configuration for Cameras Instructions
- June 9, 2024
- Zintronic
Table of Contents
SD Card Recording Configuration for Cameras
SD Card Recording Configuration
This manual refers to Zintronic® ‘B’ & ‘D’ product series.
I. SD Card and record configuration for cameras.
- SD Card formatting.
- Go into ‘Configuration’.
- Click on ‘Storage’>’Storage management’.
- Check the box on the left side where the status says ‘Unformat’ and shows SD Card capacity.
- After checking box, click on ‘Format’.
- After a while card is formatted.
- Click on ‘Save’ button.
- Continous recording configuration.
- Go to ‘Plan configuration’.
- Check ‘Enable Record’ box.
- Click on ‘Select All’.
- Click the ‘Save’ button.
- Alarm recording configuration.
- Go to ‘Plan configuration’.
- Check ‘Enable Record’ box.
- In video type select ‘Motion detection’.
- Click on ‘Select All’.
- Click the ‘Save’ button.
- Motion detection configuration – to get camera to detect motion alarms, you need to set motion detection as in the steps shown below in text manual and manual picture.
- Go to ‘Configuration’.
- Choose ‘Events’.
- Choose ‘ Ordinary Event’.
- Check the ‘Enable’ box.
- Set area using mouse cursor.
- Click ‘Save’.
Read User Manual Online (PDF format)
Loading......