eurolite LED B-40 HCL Beam Effect MK2 User Manual

eurolite LED B-40 HCL Beam Effect MK2 User Manual

DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires. Never open the housing. Keep the device away from rain and moisture.

 Please read these instructions carefully before using the product. They contain important information for the correct use of the product.

Every person involved with the installation, operation and maintenance of this device has to

• be qualified
• follow the instructions of this manual
• consider this manual to be part of the total product
• keep this manual for the entire service life of the product
• pass this manual on to every further owner or user of the product
• download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are sure that you will enjoy this device for a long period of time.

Product features

LED beam effect with RGBWA+UV color mixing, incl. remote-control

• Auto, music, master/slave and DMX mode
• 8 built-in auto and music show programs
• Stepless RGBWA+UV color blend, dimmer and strobe effects
• Rotation speed variably adjustable
• Sound-control via built-in microphone with adjustable microphone sensitivity
• Convenient wireless control via included IR remote control EUROLITE IR-16
• Hanging or standing installation possible
• 5 powerful LEDS 10 W 6in1 HCL RGBWA/UV
• Can be operated in 3; 12; 23 CH mode
• Controlling by IR remote control; stand-alone; sound to light via microphone; DMX; QuickDMX via ÙSB (optional); W-DMX by wireless solution via usb (optional); CRMX by lumenradio via USB (optional)
• Effect: multi beam effect
• Monochrome 4 digits 7-segment LED display

SAFETY INSTRUCTIONS

WARNING!
Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage.

Intended use

• This device is an LED laser projector for creating decorative lighting effects. This device is designed for professional use in the field of event technology, e.g. on stage. It is not suitable for household lighting.
• Only use the device according to the instructions given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.
• We do not assume any liability for material and personal damage caused by improper use or noncompliance with the safety instructions. In such cases, the warranty/guarantee will be null and void.
• Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the warranty invalid.

Danger due to electricity

• The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
• To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the device.
• Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never defeat the protective ground of a mains cable. Failure to do so could result in damage to the device and possibly injure the user.
• The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
• The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
• Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
• Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
• Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations or heavy mechanical stress.
• Do not place any objects filled with liquids on the device.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
• Make sure that objects cannot fall into the device, in particular metal parts.
• Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
• Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and moistened cloth. Never use solvents or aggressive detergents.

Danger to children and people with restricted abilities

• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
• This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety

Warning – risk of burns and fire

• The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the device outside of this temperature range.
• The housing temperature (Tc) can be up to 60°C during use. Avoid contact by persons and materials.
• Do not illuminate surfaces within 0,10 m of the device. This value is indicated on the device by the symbol.
• Do not use the device near highly flammable materials. Always place the device at a location where sufficient air circulation is ensured. Leave 50 cm of free space around the device. Never cover the air vents of the housing.
• Only operate the device in moderate climate, never in tropical climate.

Warning – risk of injuries

• Do not look directly at the light source. Persons with light-sensitive epilepsy may suffer from epileptic seizures or fall unconscious.
• Make sure that the product is set up or installed safely and expertly and prevented from falling down. Comply with the standards and rules that apply in your country, in particular EN 60598-2-17.
• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions.
• For overhead use, always secure the device with a secondary safety attachment such as a safety bond or safety net.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
• For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.

Caution – material damage

• This device must not be connected to the mains voltage by means of a dimmer.
• Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.
• Never switch the device on and off at short intervals. This will considerably reduce the service life of the device.
• If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The resulting condensation may destroy the device. Allow the device to reach room temperature before connecting it. Wait until the condensation has evaporated.
• Please use the original packaging to protect the device against vibration, dust and moisture during transportation or storage.
• If a serial number label is affixed to the device, do not remove the label as this would make the guarantee void.

About batteries

• Do not try to short-circuit, recharge, disassemble or heat batteries (danger of explosion!).
• Remove the batteries if the device is not used for a longer period of time.
• Damaged/leaking batteries may cause harm to your skin–use safety gloves.

DESCRIPTION OF THE DEVICE

1. 10 W LEDs, RGBWA+UV
2. Infrared sensors for the remote control
3. Indicator for DMX mode
4. Indicator for sound control
5. Display with operating buttons
6. Indicator for slave mode
7. Indicator for automatic mode
8. Rotary control for sensitivity
9. Microphone
10. Safety eyelet
11. Handles
12. Rubber feet
13. Omega-holder
14. Power output
15. Power input
16. Fuse holder
17. DMX output
18. DMX input
19. USB port for QuickDMX wireless receive

INSTALLATION

WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the device is installed securely and cannot fall down. The installation must be carried out by a specialist who is familiar with the hazards and the relevant regulations.

The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must never be fixed swinging freely in the room.

1. The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2. Block access below the work area and work from a stable platform when installing the device.
3. Use rigging hardware that is compatible with the structure and capable of bearing the weight of the device. Please refer to the “Accessories” section for a list of suitable rigging hardware.
4. For overhead installation of the device, screw a clamp via an M10 screw and self-locking nut onto the Omega-bracket. Insert the screws of the Omega-bracket into the respective holes on the underside of the device. Tighten the screws fully with a fitting screwdriver.
5. Secure the device with a safety bond or other secondary attachment. This secondary safety attachment must be sufficiently dimensioned in accordance with the latest industrial safety regulations and constructed in a way that no part of the installation can fall down if the main attachment fails. An appropriate eyelet is mounted on the device for fixation of the safety bond. Fasten the safety bond in such a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.
6. After installation, the device requires inspections periodically to prevent the possibility of rot, deformation and looseness.

CONNECTIONS

DMX512 control

A DMX512 data link is required in order to control the device via DMX. The device provides 3-pin XLR connectors for DMX connection.

1. Connect the output of your DMX controller to the DMX input DMX IN of the device with a DMX cable.
2.  Connect the DMX output DMX OUT of the device to the DMX input of the next unit in the chain. Always connect one output to the input of the next unit until all units are connected.
3. At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between Signal (–) and Signal (+) in the DMX output of the last unit.
4. If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended to insert a DMX level amplifier to ensure proper data transmission.

XLR connection:

Wireless DMX transmission with QuickDMX
T The device features an alternative DMX input for a QuickDMX receiver (sold separately). CRMX and WDMX receivers are compatible and can also be used. The connector allows a DMX control signal to be transmitted wirelessly to the device, eliminating the need for complex wiring to the DMX controller. The connector is designed as a USB port which provides the required 5 V operating voltage for the receive

Occupation of the USB port:

Power Supply

The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.

1. Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2. To switch off the unit, disconnect the power plug.
3. Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains outlet which is switchable.
4. The jack POWER OUT allows for power supply of further devices. To interconnect several devices, connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected. Matching power cables are available as accessories. In this manner, up to 8 devices can be linked at 230/240 input voltage and up to 4 devices at 110/115 input voltage.

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating mode. The operating modes can be selected by means of the display and the control buttons. All settings remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone mode via the control board and the EUROLITE IR-16 remote control or in DMX-controlled mode via any commercial DMX controller as well as wireless via QuickDMX with the optionally available EUROLITE QuickDMX USB Wireless Transmitter/Receiver.

Operating buttons

Menu structure

Mode| Display Function
---|---
**DMX mode| Addr| A001-A510| DMX start adress
** chan| 3CH| 3-channel DMX mode
12CH| 12-channel DMX mode
23CH| 23-channel DMX mode
**Sound control| ** ModE| **** Soun| SP01-SP08| Sound program 1-8
rccw-r cw| Set rotation direction
Sn00-Sn99| Rotation speedslow > fast
di00-di99| Dimmer
Slave mode| ModE| Slav| Slav| Setting for the slave device
**Auto mode| ** ModE| **** Auto| Au01-Au08| Auto program 1-8
SP00-SP99| Running speed slow > fast
rccw-r cw| Set rotation direction
Sn00-Sn99| Rotation speedslow > fast
di00-di99| Dimmer
**Color mode| ** ModE| **** StAt| r 00- r 99| Red LEDs 0-100%
G 00-G 99| Green LEDs 0-100%
B 00-b 99| Blue LEDs 0-100%
U 00-U  99| White LEDs 0-100%
A 00-A 99| Amber LEDs 0-100%
u 00–u 99| UV LEDs 0-100%
rccw-r cw| Set rotation direction
Sn00-Sn99| Rotation speedslow > fast
**System settings| ** SEt| diSP| ON| Display off after 30 seconds
OFF| Display always remains switched on
FAIL| hoLd| Last setting is held
bLAc| LEDs switch off (blackout)
rEST| No| No Reset
Yes| Reset is performed
Soun| LASt| Last value is retained
oFF| Blackout
Device information| **** inFo| SoFt| Current software version is displayed
hour| Operating time is displayed in hours

Stand-alone mode

A few seconds after connection to the mains, the effect spotlight is ready for operation and the previously selected operating mode is activated. During the start-up process, the software version is briefly displayed (V1x.xx)

Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the music (sufficient bass provided).

1. Press the MENU button so many times, until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now select with UP and DOWN the menu item ModE. Confirm with the ENTER button and select with the UP and DOWN buttons the submenu “Soun” (the display Led “Soun” light green).
2. Use the buttons UP and DOWN to select the desired show program between SP01 and SP08. Confirm with the ENTER button.
3. Use the UP and DOWN buttons to set the rotation of the program from r cw – rccw. Confirm with the ENTER button.
4. Use the UP and DOWN buttons to set the rotation speed of the program from Sn00-Sn99. Confirm with the ENTER button.
5. Use the UP and DOWN buttons to set the brightness between di00-di99. Confirm with the ENTER button.
6. Adjust the microphone sensitivity to the volume of the music with the SENSITIVITY control (MIN / MAX). The LEDs will be switched off after a few seconds if the volume is too low or if there is no sufficient bass beat.

Interconnecting several devices (master/slave operation)
Press the MENU button so many times, until you reach the top menu level Taste, (Addr, chAn, ModE, SEt, inFo). Now select with UP and DOWN buttons the menu item ModE. Confirm with the ENTER button and select with the UP and DOWN buttons the submenu “SLAU” (the display Led “Slave” light yellow).

Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled with the master unit without the need for a DMX controller. The devices must be set to the corresponding operating modes.

1. Configure all slave units before connecting the master unit: Press the MENU button so many times until SLAU is indicated on the display. Confirm with the ENTER button.
2. Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller to the DMX input of the master unit.
3. Set the master unit to the desired operating mode. The interconnected devices will now operate synchronously.

Automatic mode
In automatic mode 8 show programs are available that run at an adjustable speed.

1. Press the MENU button so many times, until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now select with UP and DOWN the menu item ModE. Confirm with the ENTER button and select with the UP and DOWN buttons the submenu “Auto” (the display Led “Auto” light blue).
2. Use the buttons UP and DOWN to select the desired show program between Au01 and Au08. Confirm with the ENTER button.
3. Use the buttons UP and DOWN to select the program speed of the program from SP00 and SP99.
4. Use the UP and DOWN buttons to set the rotation of the program from r cw – rccw. Confirm with the ENTER button.
5. Use the UP and DOWN buttons to set the rotation speed of the program von Sn00-Sn99. Confirm with the ENTER button.
6. Use the UP and DOWN buttons to set the brightness between di00-di99. Confirm with the ENTER button.

Color mode
The color mode COL offers the possibility to manually adjust the color intensity of the LEDs as well asrotation

Press the MENU button so many times, until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now select with UP and DOWN the menu item ModE. Confirm with the ENTER button and select with the UP and DOWN buttons the submenu “StAt”.

1. The display now indicates the letter r 00 for the color red and the respective brightness value. You can now adjust the brightness value between r 00 and r 99. Confirm with the ENTER button.
2. Now you can also adjust the brightness value for the colors green, blue, white, amber and UV. Confirm with ENTER again.
3. Use the UP and DOWN buttons to set the rotation of the program from r cw – rccw. Confirm with the ENTER button.
4. Use the UP and DOWN buttons to set the rotation speed of the program von Sn00-Sn99. Confirm with the ENTER button.

System settings
Press the MENU button so many times, until „Set“ is indicated in the display. Confirm with the ENTER button. Use the UP and DOWN buttons to choose the desired submenu item diSP, FAIL, rEST, Soun. Confirm with the ENTER button and to enter the desired setting, see menu structure.

Devise informations
Press the MENU button so many times, until „inFo“ is indicated in the display. Confirm with the ENTER button. Use the UP and DOWN buttons to choose the desired submenu item SoFt or hour and confirm with the ENTER button. The current software version or operating time ean now be read out, see menu structure.

Remote control IR-16
The IR remote control allows convenient control of the integrated show programs in automatic mode or sound-controlled mode. Press the buttons repeatedly to switch between the programs. When actuating a button, always hold the remote control in the direction of the sensor at the control unit’s front or rear. A direct line of sight between the remote control and the sensor is required. The IR remote control will only work in stand-alone mode, it will not work in DMX or slave mode.

buttons.
| Speed for automatic and sound-controlled program
| Rotation speed for automatic and sound-controlled program
| No function
| No function
| Change of direction rotation
| No function

Battery

The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts prevents the battery from being discharged during storage. Prior to the first operation remove the foil from the battery support on the rear side of the remote control. Otherwise operation of the remote control is not possible. If the range of the remote control decreases, replace the battery. For this purpose, on the rear side of the remote control press the small bar with the groove to the right and at the same time remove the battery support. For operation, one 3 V button cell type CR 2025 is required. When inserting, pay attention that the positive pole of the button cell shows upwards in the support.

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with max. 23 control channels. However, it can also be switched to a mode with 3 or 12 channels if different functions are required. To be able to operate the device with a DMX controller, the DMX starting address must be set. The starting address depends upon which DMX controller is being used. Please refer to the controller’s documentation.

1. Press the MENU button so many times until chAn appears on the display. Confirm with the ENTER button.
2. The display will show 3 CH (3 DMX channels), 12 CH (12 DMX channels) or 23 CH (23 DMX channels). Use the buttons UP and DOWN to select the desired DMX channel mode. Confirm with the ENTER button.
3. For the DMX starting address press the MENU button until Addr is shown on the display. Use the buttons UP and DOWN to set the address A001-A510. Confirm with the ENTER button.
4. If DMX signals are being received, the display will not blink. If no control signals are available, the display will blink. Additionally, the red LED next to the display lights up to indicate the DMX operation.

Note: Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX chain. If several devices are addressed to the same address, they will work synchronously

Functions in DMX mode

3-channel mode

No function
016 – 030| Auto program 01, unicolor
031 – 045| Auto program 02, unicolor
046 – 060| Auto program 03, unicolor
061 – 075| Auto program 04, unicolor
076 – 090| Auto program 05, multicolor
091 – 105| Auto program 06, multicolor
106 – 120| Auto program 07, multicolor
121 – 135| Auto program 08, multicolor
136 – 150| Sound program 01, unicolor
151 – 165| Sound program 02, unicolor
166 – 180| Sound program 03, unicolor
181 – 195| Sound program 04, unicolor
196 – 210| Sound program 05, multicolor
211 – 225| Sound program 06, multicolor
226 – 240| Sound program 07, multicolor
241 – 255| Sound program 08, multicolor
3 Speed| 000 – 255| Auto programs speed 0 – 100%

12-channel mode

Channel                                   Value Function

**1 Rotation| 000 – 005| No function
006 – 126| Clockwise rotation with decreasing speed
127 – 128| No movement
129 – 255| Counter clockwise rotation with increasing speed
2 Master Dimmer| 000 – 255| Brightness (0 – 100%)
3 Strobe| 000 – 005| No function
006 – 255| Strobe with increasing speed (Frequenzy 1 – 20 Hz)
4 Red| 000 – 255| Intensity adjustment of the red LEDs (0 – 100%)
5 Green| 000 – 255| Intensity adjustment of the green LEDs (0 – 100%)
6 Blue| 000 – 255| Intensity adjustment of the blue LEDs (0 – 100%)
7 White| 000 – 255| Intensity adjustment of the white LEDs (0 – 100%)
8 Amber| 000 – 255| Intensity adjustment of the amber LEDs (0 – 100%)
9 UV| 000 – 255| Intensity adjustment of the UV LEDs (0 – 100%)
****10 Color Macro, Color Jumping & Color Fading| 000 – 005| No function
006 – 013| Red
014 – 021| Amber
022 – 029| Yellow warm
030 – 037| Yellow
038 – 045| Green
046 – 053| Turquoise
054 – 061| Cyan
062 – 069| Blue
070 – 077| Lavender
078 – 085| Mauve
086 – 093| Magenta
094 – 101| Pink
102 – 109| Warm white
110 – 117| White
118 – 125| Cold white
126 – 127| Color Jumping stop
128 – 191| Color Jumping speed, slow > fast / Color 1 > 12
192 – 255| Color Fading, slow >fast / Color 1 > 12
11 Auto / Sound Program CH3-9, no function| ** 000 – 255| ** Auto/Sound programs (see 3-channel mode)
12 Speed**| 000 – 255| Auto programs speed 0 – 100%

23-channel mode

**LED group 1
5 Green| 000 – 255| Intensity adjustment of the green LEDs(0 – 100%)
6 Blue| 000 – 255| Intensity adjustment of the blue LEDs (0 – 100%)
7 White| 000 – 255| Intensity adjustment of the white LEDs (0 – 100%)
8 Amber| 000 – 255| Intensity adjustment of the amber LEDs (0 – 100%)
9 UV| 000 – 255| Intensity adjustment of the UV LEDs (0 – 100%)
10 Red| 000 – 255| Intensity adjustment of the red LEDs (0 – 100%)| ****LED group 2
11 Green| 000 – 255| Intensity adjustment of the green LEDs(0 – 100%)
12 Blue| 000 – 255| Intensity adjustment of the blue LEDs (0 – 100%)
13 White| 000 – 255| Intensity adjustment of the white LEDs (0 – 100%)
14 Amber| 000 – 255| Intensity adjustment of the amber LEDs (0 – 100%)
15 UV| 000 – 255| Intensity adjustment of the UV LEDs (0 – 100%)
16 Red| 000 – 255| Intensity adjustment of the red LEDs (0 – 100%)| ****LED group 3
17 Green| 000 – 255| Intensity adjustment of the green LEDs(0 – 100%)
18 Blue| 000 – 255| Intensity adjustment of the blue LEDs (0 – 100%)
19 White| 000 – 005| Intensity adjustment of the white LEDs(0 – 100%)
20 Amber| 000 – 005| Intensity adjustment of the amber LEDs (0 – 100%)
21 UV| 000 – 255| Intensity adjustment of the UV LEDs (0 – 100%)
22 Auto / Sound Program CH 3-21, no function| ** 000 – 255| ** Auto / Sound Programs (see 3-channel mode)
23 Speed**| 000 – 255| Auto programs speed 0 – 100%

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.

1. Disconnect the device from power and allow it to cool before cleaning.
2. Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may damage the surface. Make sure that no liquids can enter the device.
3. The device must be dry before reapplying power.

There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as this may result in damage. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have further questions, please contact your dealer.

Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

1. Disconnect the device from power and allow it to cool.
2. Open the fuse holder of the mains connection with a fitting screwdriver.
3. Remove the old fuse from the fuse holder and replace it with a new fuse.
4. Carefully push the fuse holder back into its position before reapplying power

PROTECTING THE ENVIRONMENT

Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information. Remove any inserted batteries and dispose of them separately from the product.

 You as the end user are required by law (Battery Ordinance) to return all used batteries/ rechargeable batteries. Disposing of them in the household waste is prohibited. You may return your used batteries free of charge to collection points in your municipality and anywhere where batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly, you contribute to the protection of the environment.

TECHNICAL SPECIFICATIONS

supply cord with safety plug
Power output:| IEC connector (F) mounting version
Fuse:| T1,6 A Fuse replaceable
Lamp type:| LED lamp
LED:| 5 x 10 W 6in1 HCL RGBWA/UV
Flash rate:| 0 – 20 Hz
DMX channels:| 3; 12; 23
DMX input:| 3-pin XLR (M) mounting version
DMX output:| 3-pin XLR (F) mounting version
Control:| IR remote control; stand-alone; Sound to light via Microphone; DMX; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional); Master/slave function
Housing color:| Black: Art.No. 51918952
White: Art.No. 51918953
Display type:| Monochrome 4 digits 7-segment LED display
Dimensions:| Length: 32,00 cm
Width: 32,00 cm
Height: 39,00 cm
Weight:| 4,2 kg
Remote control|
---|---
Battery:| 1 x Button cell 3.0 V CR2025 lithium manganese built-in

Accessories

 Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany  D00143647 Version 1.1 Publ. 20/02/2023

References

• art.no

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>