Yale 198YRD450B Assure Lock 2 Key-Free Touchscreen User Guide
- June 9, 2024
- Yale
Table of Contents
198YRD450B
Assure Lock 2 Key-Free Touchscreen
User Guide
198YRD450B Assure Lock 2 Key-Free Touchscreen
Download the Yale Access App
Tip: Have an August account?
Log in using your existing username and passwords.
Tap ‘Set Up A Device’
Scan the Yale Access QR code located inside the lock’s battery compartment, or
found below. 
AUG:LFI82003XH
Install the Lock
Using the app is a requirement for this step.
The app will guide you through step-by-step installation instructions. 
If You Have a Smart Module
Insert the module into the slot above the batteries and follow the
installation steps in the app.
Tip: Once your lock la Installed, Insert batteries as the last step.
Tip: If you have a Bluetooth lock with no Smart
Module you can always add one!
Visit Shop YaleHome.com/SmartModule
Specifications
Model Name: YALE BLE Module (Gen 1)
Description: YALE BLE Radio Module
Model Number: MD-02
Standards: Bluetooth® Specification V4.0 (Bluetooth® Smart), 2.4GHz ISM
Band
Antenna: Internal Single-Band (Internal IFA) Transmitted
Security: Wpa2, Wep
Interface: Bluetooth®.= Smart Accessory Configuration Mode, Ongoing
Network Activity, And Other Troubleshooting Information.
Power Consumption: 100-240V∼50-60Hz 0.1 A
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by YALE Home, Inc. is under
license. Other trademarks and trade names are those of their respective
owners.
Apple®, iPhone®, iPad®, and iPod touch® are trademarks of Apple Inc.,
registered in the U.S. and other countries. HomeKit’ is a trademark of Apple
Inc.
To control this HomeKit-enabled accessory, the latest version of OS or iPadOS
is recommended.
Apple, Apple Watch, HomeKit, iPad, iPad Air, and iPhone are trademarks of
Apple Inc., registered in the U.S. and other countries. HomePod is a trademark
of Apple Inc.
Use of the Works with Apple badge means that an accessory has been designed to
work specifically with the technology identified in the badge and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
Environmental
YALE BLE Module DIMENSIONS: 2.2″ width X 1.06″ height
DEVICE WEIGHT: 0.3 oz (8.5 g)
CERTIFICATION: FCC, IC
OPERATING TEMP: 32º to 104°
Fahrenheit (0° to 40°C)
STORAGE TEMP: -4° to 158°
Fahrenheit (-20° to 70°C)
OPERATING HUMIDITY: 10 to 85%
Safety
-
Read instructions before using this product
-
Keep these instructions for future reference
-
Heed all warnings on the product and in this manual
-
Follow all instructions
-
Do not use this unit near water or excessive moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present. Do not use with wet hands.
-
Avoid prolonged exposure to direct sunlight or heat above operating temperature
-
Do not install near any heat sources, such as radiators, heat registers, stoves or other unit (including amplifiers) that produce excess heat
-
Only use attachments/ accessories specified by the manufacturer
-
Do not swallow any parts.
Keep any small parts away from children at ail times, potential choking hazard. -
This product contains no user serviceable parts. Please contact your local supplier.
-
Modification of this product (including unauthorised hardware, firmware or software) in any way voids any warranty and compliance of this product and becomes the sole responsibility of the user.
-
User assumes all risk associated with the suitability, installation and performance of the module and other third party components, hardware, software and services that user selects. You assume all risk associated with the suitability, installation and performance of the door lock and other third party components, hardware, software and services that you select.
Compliance
FCC Compliance Notice
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consett the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) JMS device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
SED Compliance Notice
INDUSTRY CANADA COMPLIANT
This Class A digital apparatus complies with Canadian ICES-003.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS. standard(s).
Operation is subjected The following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference.
including interference that may cause undesired operation of the device.
RF Radiation Exposure
Radiation Exposure Statement:
This equipment complies with FCCAC radiation exposure limits set forth for an
uncontrolled environment. The minimum distance from the body to use the device
under normal conditions is at least 20 cm (7.9 inches). This transmitter must
not be co-located of operating in conjunction with any other antenna or
transmitter.
Australia & New Zealand
(RCM & R-NZ)
RCM Radiation Exposure Statement
This system has been evaluated for RF exposure for Humans as referenced in the
Australian Radiation Protection standard and has been evaluated to the ICNIRP
(International Commission on Non-lionizing Radiation Protection) limits.
This product has been deemed to comply with the RF exposure limits under the
general public limits. The minimum distance tromp the body to use the device
under normal conditions is at least 20cm (7.9 inches).
This product complies with ail the applicable requirements of the Regulatory
Compliance Mark (RCM) for Australia & New Zealand and Radio Spectrum
Management (R-NZ) requirements for New Zealand.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>