EDIFIER TWS6 True Wireless Earbuds with Balanced Armature Drivers User Manual
- June 9, 2024
- Edifier
Table of Contents
EDIFIER TWS6 True Wireless Earbuds with Balanced Armature Drivers
Product Description and Accessories
There are different size of ear tips attached in the package, please select the suitable ones to wear.
Wearing Instructions
How to wear earwigs
Keep earbud and earwig Put the earwig in the same direction over the earbud Put the eartip over the earbud
How to wear m1emory foam ear tips
Pinch :memory foam1 ear tip and put it over the earbud
Fix t he earbud by hand and release unt1l1 the memory foam earnp rebounds
User Guide
Charge the Earbuds
- You may hear a warning tone when at low battery level, please charge the earbuds.
- Charging: place the earbuds in the charging case Charging time: about 1.5 hours for a ful l charging Indicator light flashing in a breathe pattern=charging Indicator light off fully charged
Charge the Charging Case
Every time when the charging case is opened, the flashing times of indicator
light on its bottom mean t he times that the earbuds can be charged; if the
indicator light flashes rapidly, it means the charging case has a low battery
capacity, please charge the case in time.
Indicator light flashing= charging Indicator light off= fully charged Rated
input: SV= SSmA(earbuds) SV= S00mA(charging case)
Warning: The rechargeable batteries that provide power for this product
must be disposed properly for recycling. Do not dispose of batteries in fire
to prevent an explosion.
If the product with lithium battery is not used for long periods of time,
please charge the product at least once per three months.
Power ON/OFF
- Power on automatically when taken out from the charging case;
- Power off automatically while placed in the charging case.
Bluetooth Connection
- Open the charging case, then press and hold the pairing button to enter pairing state, the indicator light flashes rapidly;
- Set mobile phone to search for and connect to either “EDIFIER TWS6 L” or “EDIFIER TWS6 R”, after pairing is successful, the indicator light flashes slowly.
- You can choose to use one earbud or both earbuds.
TWS (true wireless stereo) Pairing of the Left and Right Earbuds
The left and right earbuds have finished TWS pairing before leaving factory. If the wireless connection fails to resume, please follow the steps below to re-pair:
- Place the earbuds in the charging case, then press and hold the pairing button for 8 seconds to enter TWS pairing state, t he indicator light flashes rapidly;
- After pairing is done, blue lights of both earbuds flash slowly.
Functional Operation Instructions
Music Playback
Cal I (same operation for the left and right earbuds)
- Clear pairing records: Whether the charging case is being charged or not, open the case and place the earbuds in it, then press and hold the pairing button for approx. 10 seconds to clear pairing records.
Indicator light is off during charging.
- Please ensure the earbuds are correctly placed in the charging case.
- When the earbuds are not used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the light will be lit.
No sound
- Check if the earbuds are operating.
- Check if the earbuds volume is at an appropriate level.
- Check if the earbuds are correctly connected with mobile phone.
- Check if the earbuds are operating within a normal working range.
Call quality of the earbuds are not good.
- Check if mobile phone is in an area with strong signal.
- Please ensure the earbuds are within effective distance (1 Om) and no obstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play via earbuds.
- Please ensure the paired device support AVRCP (Audio Nideo Remote Control Profile) profile.
Maintenance
During using, please read the following suggestions carefully.
- Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
- Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and deform plastic components.
- Do not put the product in cold places to avoid damaging internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch product surface to avoid damaging shell and affecting façade.
If the product cannot operate properly, please send it to your qualified maintenance agency.
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
©2019 Edifier International Limited. Al l rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures
and il lustrations shown on this manual may be slightly different from actual
product. Images are for illustrative purposes only and may differ from the
actual product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>