EDIFIER R1010BT Multimedia Speaker User Manual
- June 9, 2024
- Edifier
Table of Contents
R1010BT
Multimedia Speake
Important safety instruction
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. Thank you for purchasing this Edifier product.
For generations. Edifier tries to provide pattered speaker products to satisfy
the need of our end customers, even the most demanding ones. This product can
add to your home entertainment. personal computer, and mini home heater great
sound performance. Please read this manual carefully to obtain the best of
this system
The lightning flash with arrowhead inside thetriangle, is intended to alert
the user to the presence of un.insulated dangerous voltage within the
product’s enclosure that may be of a sunk lent magnitude to constitute a risk
of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK 00 NOT OPEN
To prevent the risk of electric shock, do not remove cover (or back). No user-
serviceable Parts inside. Refer servicing to qualified Service personnel only.
The exclamation point inside the triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in
the literature accompanying the product.
- Read these Instructions.
- Keep these instructions.
- Reed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions,
- Do not install near any heat sources such as radiators. heat registers. stows. or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safely purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into you’ outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being waked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during Ightnivo storms or when unused for long periods of time.
- Refer al servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture. does not operate normally, or has been dropped.
- The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable
Use only with the cart, stand,
tripod, bracket. or table specified by the manufacturer. or sold with the
apparatus. When a can is used, use caution when moving the cart/apparatus
combination to avoid Miry from tip over.
Correct Disposal of this product. This (narking indicates that this product should not be disposed with other household wastes throughout the F11. To present possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. to return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can lake this product for environmental safe recycling.
**** This equipment is a (lass II or double insulated electrical appliance. II has been designed in such a way that it does not require a safety connection to electrical earth.
What’s In The Box
Box Contents:
Speaker Controls
-
Master volume control/ input selection Press in to navigate between audio sources: LINE IN >Bluetooth.
Note: Press and hold the master volume control dial to disconnect from Bluetooth devices -
Bass adjustment
-
LINE IN A input port
-
LINE IN B input port
-
Power cord
-
Power switch
-
Wire clip (connect to passive speaker)
-
Indicator green: LINE IN mode blue: Bluetooth mode
Connection
LINE IN input
- Press the volume dial on the active speaker to select LINE IN input. The LED indicator turns to green when the “LINE IN” input is selected.
- Using the included audio cable to connect audio sources (mobile phones, tablets etc) to your speaker.
- Play from your device and adjust the volume accordingly.
Bluetooth Input
Pairing
- Turn on speaker and switch to Bluetooth mode by pressing the master volume dial on the active speaker until the indicator LED turns to blue.
- Go to setup section on your source devices (mobile phones, tablets, etc.) and search for nearby Bluetooth devices, you will find “EDIFIER R1010BT” in the list.
- Pair your device with “EDIFIER R1010BT”.
- Play audio tracks on your device and adjust the volume to a desired level.
- To disconnect Bluetooth, press and hold the master volume control for about 2 seconds.
Note:
- Bluetooth connectivity and compatibility may be different among different source devices, depending on the software versions of source devices.
- To enjoy the full Bluetooth functions of this product, please ensure your mobile device supports A2DP profile.
- PIN code for connection is “0000” if needed.
Pairs with two Bluetooth devices simultaneously The speaker is able to connect simultaneously with two different Bluetooth devices to ensure the music never stops.
Here is how it works:
- Pair with first Bluetooth device
- Now pair with the second Bluetooth device.
You are set. The speaker is connected to both devices at same time allowing you and your friend to select and play music from two devices.
Specifications
| Power output: | R/L: 12W+12W |
|---|---|
| Noise level: | ≤ 25dB(A) |
| Input type: | Dual stereo RCA ports, Bluetooth |
| Input sensitivity: | Line in A: 700mV±50mV |
| Frequency response: | 65Hz-17KHz |
| Bass driver: | 4 inch (106mm) |
| Treble driver: | Φ 13mm |
Troubleshooting
| Problem | Solution |
|---|---|
| No sound | •Check if the power indicator light is turned ON |
•Try to turn up the volume using either the master volume control.
•Ensure the audio cables are firmly connected and the input is set correctly
on the speakers.
•Check if there is a signal output from the audio source.
Cannot connect via Bluetooth| •Make sure the speaker is switched to Bluetooth
input. If it is in other audio input modes, Bluetooth will not conned.
Disconnect from any Bluetooth device by pressing and holding the volume dial
in Bluetooth mode, then try again.
•Effective Bluetooth transmission range is 10 meters; please ensure that
operation is within the range.
•Try another Bluetooth device for connection.
The R101OBT does not turn on| •Check if main power is connected, or if the
wall outlet is switched on.
To learn more about EDIFIER, please visit
www.edifier.com
For Edifier warranty queries, please visit the relevant country page on
www.edifier.com and review the section titled
Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com
(English) or www.edifierla.com
(Spanish/Portuguese) for local contact information.
Manual Edition 1.0, Feb. 2017
IB-200-R1000B-00
Suit 2207, 22nd floor, Tower II,Lippo centre, 89 Queensway Hong Kong
Tel: +852 2522 6989
Fax: +852 2522 1989
www.edifier.com
© 2017 Edifier International Limited. All rights reserved. Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown on this manual may be slightly different from actual
product. If any difference is found, the actual product prevails.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>